Other Products / Services #428440

The new heat source to check your thermometers accuracy up to 300C572F. Simply set the heat source to the desired test point, insert the test probe into the best fitting well, and get a verification of the performance. Its that easy!

This CEM Flexible Thermo-Anemometer features a 16" gooseneck detector allowing you to take air velocity and temperature measurements in hard to reach areas.

Particle Counter with unique 2.8color TFT LCD display and built-in camera for capturing videos and photos that are stored onto internal memory or a micro SD card, for viewing on PC, providing fast, easy and accurate readings for particle counter, Air Temperature, Relative Humidity, Dew Point & Wet Bulb Temperature and , Gas Detection (DT-9881 only). The DT-9880DT-9881 can measure up to 6 channels of particle sizes Use the included software to generate reports with videos, photos, and data points. DT-9881 can also detect and measure the concentration of HCHO (Methanal) Gas and CO (Carbon Mono-Oxide) Gas.

The radiation detector DT-9501 was developed to detect -, -, - and x- radiation. The radiation meter DT-9501 provides many features including a large, high-resolution backlit LCD display with annunciators. The radiation detector DT-9501 has internal data storage for up to 2000 data sets, which are saved either manually or automatically. Furthermore the radiation detector DT-9501 is equipped with a Bluetooth interface to transfer the measured data in real-time to a computer. With the software, that is included with the product, the data can then be further processed and reviewed. The radiation detector DT-9501 stands out with its high accuracy and practical design. The radiation detector can be applied in the pharmaceutical industry, laboratories, power plants, quarries, the emergency services, metal industries, petroleum reservoirs, environmental protection etc.

CEM High Performance Thermal Imager with high-resolution 384x288 with options available for 160x 120, easily helps you to find the potential problems with innovation features and functionality, you can perform infrared inspections faster and more efficiently and thoroughly document problematic areas for additional analysis of problematic areas.

CEM High Performance Thermal Imager with high-resolution 384x288 with options available for 160x 120, easily helps you to find the potential problems with innovation features and functionality, you can perform infrared inspections faster and more efficiently and thoroughly document problematic areas for additional analysis of problematic areas.

The Thermal Imager is handheld imaging camera used for predictive maintenance, equipment troubleshooting, and verification. Thermal and visual images are displayed on the LCD and can be saved to a Micro SD Memory card. Removing the SD memory card and connecting it to a PC accomplish transferring images to a PC through the included card reader.In addition to the features mentioned above, the Thermal Imager provides video recording with audio and play back.

CEM Professional Infra Red Thermometer with dual laser is a very handy device to be used for all trouble-shooting engineers for taking temperature of areas that are inaccessible, moving targets and for surveillance of heat at various points in an area. These have adjustable emissivity between 0.10 to 1.00 to cover various materials whose temperature is measured.

CEM Professional Infra Red Thermometer for high temperature measurement is a very handy device to be used for all trouble-shooting engineers for taking temperature of areas that are inaccessible, moving targets and for surveillance of heat at various points in an area. Specially used for furnaces and high temperature areas. These have adjustable emissivity between 0.10 to 1.00 to cover various materials whose temperature is measured.

The new heat source to check your thermometers accuracy up to 300C572F. Simply set the heat source to the desired test point, insert the test probe into the best fitting well, and get a verification of the performance. Its that easy!

This is a brand new CEM IR-91 CE certified digital non-contact infrared thermometer with built-in laser pointers and back-light LCD display. This top-of-the-line device has a super narrow 50:1 distance to spot ratio and a wide range of -31 oF to 1652 oF (-35 oC to 900 oC). Forget the old analog devices, this newly designed digital light weight device gives you accurate measurement from safe distance. The build-in laser pointer help you aim better at the object for an accurate result. The back light LCD screen allows you to read easily in the dark. The industrial panel design allows easy integration of the meter with the existing work bench. It keeps your work environment neat and clean.

The DT-161 is a waterproof folding thermometer, which offers handy, practical and strong support when carrying out temperature measurements. The thermometer features IP67 class protection and can be used under all conditions. It can also be easily cleaned under running water and has a rubber-coated surface for non-slip handling. The DT-161 has a large, illuminated display for easy and error-free viewing of measurement data under poor lighting conditions.

IR-97 Food Safety Infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals. It combines n on - c on t ac t infrared thermometer with RTD probe, it can measure the surface and inside temperature of object, professionally used in food preparationpresentation measurements. At the same time, it has timer and temperature range indicate light, this functions can fit for HACCP (Hazard Analysis and Critical Control Point), make sure the food stuffs are safe.

The DT-9989 represents the next generation of high performance industrial logging multimeters, including higher accuracies and greater troubleshooting convenience than ever before. With the ability to log data and review it graphically on large colored display, you can solve problems faster and help minimize downtime, while working at several locations.

The DT-9660 series of Multimeters are compact, easy-to-use tools that deliver, safe, reliable measurements. These are completely protected against wrong connections and confirm to EN-61010-1, CAT-IV 600V and CAT-III 1000V. The IP-67 protection makes the instrument dust proof and water proof, hence they can by used in any environment. These meters have 10A1000V & 0.5A1000V Fuse protection on current range. Your job requires that you have a rugged, reliable and accurate digital multimeter. The DT-9960 series offer everything you need.

The 175176 is a datalogger for measuring and recording True RMS current and voltage. The readings are saved in the logger and simply read out by your PC with USB interface. The LCD can show current readings, MAX, MIN and sign of alarm.

CEM DT-910 Series palm-size compact multimeters measures the world in just your palm. These are compact, easy to use tools. These, palm-sized digital multimeters, deliver safe, reliable measurements time after time. They are made to fit the way you work! The compact size meters are designed to fit in your palm of your hand and go with you no matter where your job takes you.

Card type Digital Multimeter, fits in pocket, provides all the facilities required for a technician on the go. This 3999 Counts Multimeter provides 10 functions at an unbeatable price. The meter also has Relative measurement; Data Hold, Auto power off and Auto Power off disable functions.

This is an ideal tool for trouble shooting, electrical equipment as well as circuit faults. It confirms to EN:61010-1, CAT-III 600V. The meter automatically selects ACDC Voltage and also auto selects Capacitance, Resistance, Continuity and diode test.

Whether youre using on-line or handheld infrared pyrometers, you need a high performance calibration standard to verify accuracy. Portable IR Calibrator provides a stable black body target for calibrating non-contact IR thermometers up to 500. The portable IR calibrator features a large temperature controlled blackbody target with a diameter of 2.25 (57mm), which offers a wide field of view area for optical variations in IR thermometers. With an emissivity of 0.95, the isothermal target can be controlled in set-point increments of 0.1from 50 to 500.