Our Products

Measuring Instruments & Equipment #5248681

Oval Gear Flow Meter

Enclosure Aluminum anodize/S.S-304/S.S-316
Rotor Aluminum anodize/S.S-316/PPS
O-ring NBR/Viton
Shaft Hard Stainless Steel-316
Accuracy (standard installation position) +/- 0.5% ( Higher on request)
Maximum working pressure 10MPa
Fluid &Ambient temperature -40 to80 Deg
Power voltage 5 - 24V DC
Connection Threaded M/F / Flange

View Complete Details

Ask Latest Price & Details

Crude Oil Positive Displacement Flow Meter

Output PULSE (from Sensor ) / 4-20mA / RS 485 Modbus (Optional )
Display 5 Digit LCD Flow Rate Indicator / 8 Digit Totaliser
Enclosure Flameproof IIA IIB CMRI certified
Mounting Integral

View Complete Details

Ask Latest Price & Details

Electromagnetic Flow Meter

Accuracy +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
Repeatability +/- 0.2% F.S
CERTIFICATIN CE CERTIFIED
METERINGTUBE S.S 304
ELECTRODE S.S 316
FLANGE C.S.
LINING PTFE
END CONNECTION ASA150#Flanged as per B 16.5.
MOUNTING Inline
MIN CONDUCTIVITY 10 uS/cm
PRESSURERATING 10 Bar ( Higher Pressuer Available)
MAINSPOWER 230 V AC 50Hz / 24 V DC
ENCLOSURE M.O.C. Cast Aluminum IP65Signal Amplifier Box
CABLE ENTRY Size 220 X 120 X 85 mm with glass window.
FLOW UNIT PG-9 / PG-11
EMPTY PIPEDETECTION Selectable.
LOW CUTTOFF
Output Available
COMMUNICATION 4 – 20 Ma
DIRECTION RS 485 MODBUS
PROGRAMMING Suitable for Bi- Directional
TERMINALS Through Key/ Keypad on front facia.
SIGNAL CONVERTOR Shock – Hazard – Protected screwless terminals.
INTERCHANGE ABILITY :Fully interchangeable with all sizes of flow sensors. Integral / Remote (with 3 meterCable)
POWERFAILURE MODE Provision of RAM/PROM to store parameter entered and measured flow dataduring power failure
MAX PROCESS TEMP. 0-60 deg C Normally ( Higher Temperature Available)

View Complete Details

Ask Latest Price & Details

Diesel Oil Flow Meter

Body Aluminum anodize/S.S-304/S.S-316
Enclosure Explosionproof
Rotor Aluminum anodize/S.S-316/PPS
O-ring NBR/Viton
Shaft Hard Stainless Steel-316
Accuracy (standard installation position) +/- 0.5% ( Higher on request)
Maximum working pressure 10MPa
Fluid &Ambient temperature -40 to80 Deg
Power voltage 5 - 24V DC
Connection Threaded M/F / Flange

View Complete Details

Ask Latest Price & Details

Diesel Flow Meter

Accuracy +/-1%
Weight 3 kg
End Connections 1-1.5 inch
Max Flow Rate 40 GPM
Temperature 80 deg C

View Complete Details

Ask Latest Price & Details

ELECTROMAGNETIC FLOW METER FOR DAIRY

Accuracy +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
Repeatability +/- 0.2% F.S
CERTIFICATIN CE CERTIFIED
METERINGTUBE S.S 304
ELECTRODE S.S 316
FLANGE C.S.
LINING PTFE
END CONNECTION ASA150#Flanged as per B 16.5.
MOUNTING Inline
MIN CONDUCTIVITY 10 uS/cm
MAX PROCESS TEMP. 0-60 deg C Normally ( Higher Temperature Available)
PRESSURERATING 10 Bar ( Higher Pressuer Available)
MAINSPOWER 230 V AC 50Hz / 24 V DC
ENCLOSURE M.O.C. Cast Aluminum IP65Signal Amplifier Box
CABLE ENTRY PG-9 / PG-11
FLOW UNIT Selectable.
EMPTY PIPEDETECTION Available
LOW CUTTOFF Available
Output 4 – 20 Ma
COMMUNICATION RS 485 MODBUS
DIRECTION Suitable for Bi- Directional
PROGRAMMING Through Key/ Keypad on front facia.
TERMINALS Shock – Hazard – Protected screwless terminals.
SIGNAL CONVERTOR Integral / Remote (with 3 meterCable)
INTERCHANGE ABILITY Fully interchangeable with all sizes of flow sensors.
POWERFAILURE MODE Provision of RAM/PROM to store parameter entered and measured flow dataduring

View Complete Details

Ask Latest Price & Details

Sanitary Electromagnetic Flow Meter

Accuracy +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
Repeatability +/- 0.2% F.S
CERTIFICATIN CE CERTIFIED
METERINGTUBE S.S 304
ELECTRODE S.S 316
FLANGE C.S.
LINING PTFE
END CONNECTION UNION TRICLOVER TYPE FITTING
MOUNTING Inline
MIN CONDUCTIVITY 10 uS/cm
MAX PROCESS TEMP. 0-60 deg C Normally ( Higher Temperature Available)
PRESSURERATING 10 Bar ( Higher Pressuer Available)
MAINSPOWER 230 V AC 50Hz / 24 V DC
ENCLOSURE M.O.C. Cast Aluminum IP65Signal Amplifier Box
CABLE ENTRY PG-9 / PG-11
FLOW UNIT Selectable.
EMPTY PIPEDETECTION Available
LOW CUTTOFF Available
Output 4 – 20 Ma
COMMUNICATION RS 485 MODBUS
DIRECTION Suitable for Bi- Directional
PROGRAMMING Through Key/ Keypad on front facia.
TERMINALS Shock – Hazard – Protected screwless terminals.
SIGNAL CONVERTOR Integral / Remote (with 3 meterCable)
INTERCHANGE ABILITY Fully interchangeable with all sizes of flow sensors.
POWERFAILURE MODE Provision of RAM/PROM to store parameter entered and measured flow dataduring power failure

View Complete Details

Ask Latest Price & Details

VORTEX FLOW METER FOR STEAM

Medium gas, liquid, vapor
.Accuracy Liquid Gas 1% Steam 1.5%
Temperature -20oC to +350oC
Measure Liquid Gas Steam
inside nominal diameter (mm) 25, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, (300~1000 plug-in)
nominal pressure (MPa) DN25-DN200 4.0(>4.0 order by agreement), DN250-DN300 1.6(>1.6 order by agreement)
medium temperature (°C) piezoelectric type:-40~260, -40~320;capacitance: -40~300, -40~400, -40~450(order by agreement)
noumenon 1Cr18Ni9Ti, (order by agreement if need other material)
vibrating acceleration piezoelectric type:0.2g capacitance:1.0~2.0g
range ±1%R, ±1.5%R, ±1FS;plug-in:±2.5%R, ±2.5%FS
Range degree 1:6~1:30
service voltage sensor:+12V DC, +24V DC;transmitter:+12V DC , +24V DC;battery supply feed:3.6V battery
output signal square wave pulse (non- battery supply feed):high level≥5V, low level≤1V;current:4~20mA
loss coefficient JB/T9249 Cd≤2.4
anti-explosion sign Ben-an type:Exdâ¡ia CT2-T5 anti-explosion type:Exdâ¡CT2-T5
Protection grade ordinary type IP65 dive type IP68
environment condition Tem-20°C~55°C, relative humidity 5%~90%, atm press 86~106kPa
transmission range three-wire system flow sensor:≤300m, electric sign of two-wire system transmitter (4~20mA):load resistance≤750Ω

View Complete Details

Ask Latest Price & Details

Water Flow Meter

CERTIFICATIN CE CERTIFIED
METERINGTUBE S.S 304
ELECTRODE S.S 316
FLANGE C.S.
LINING PTFE
END CONNECTION ASA150#Flanged as per B 16.5.
MOUNTING Inline
ACCURACY +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
REPEATABILITY +/- 0.2% F.S
MIN CONDUCTIVITY 10 uS/cm
MAX PROCESS TEMP. 0-60 deg C Normally ( Higher Temperature Available)
PRESSURERATING 10 Bar ( Higher Pressuer Available)
MAINSPOWER 230 V AC 50Hz / 24 V DC
ENCLOSURE M.O.C. Cast Aluminum IP65Signal Amplifier Box
CABLE ENTRY PG-9 / PG-11
FLOW UNIT Selectable.
EMPTY PIPEDETECTION Available
LOW CUTTOFF Available
OUTPUT 4 – 20 Ma
COMMUNICATION RS 485 MODBUS
DIRECTION Suitable for Bi- Directional
PROGRAMMING Through Key/ Keypad on front facia.
TERMINALS Shock – Hazard – Protected screwless terminals.
SIGNAL CONVERTOR Integral / Remote (with 3 meterCable)
INTERCHANGE ABILITY Fully interchangeable with all sizes of flow sensors.
POWERFAILURE MODE Provision of RAM/PROM to store parameter entered and measured flow dataduring

View Complete Details

Ask Latest Price & Details

Low Cost Battery Operated Electromagnetic Flow Meter

Specifications

Low Cost Battery Operated Electromagnetic Flow Meter (ISO 9001)1. Battery powered2. High Accuracy3. RS 485 / GPRS System

Low Cost Battery Operated Electromagnetic Flow Meter (ISO 9001)

Applications :
1. Effluent Treatement Plants.
2. Sewage Treatement Plants.
3. Water Supply Schemes.
4. Steel & Aluminium.
5. Pulp & Paper.
6. Chemical & Fertilizers.
7. Food & Drug.
8. Pumps & Valve Calibration Lab.
9. Dairy Industry.
10. Corrosive Liquids.
11. Sugar Industry.

Features:

No pressure loss. No moving parts.
High accuracy of 0.2%.
Wide size range of 103000mm, adapt to different size of pipeline.
Two-line LCD, able to displaypositive and negative instantaneous flow and accumulative flow.
Measurement is not affected by the density, viscosity, temperature, pressure and electroconductibility of fluid;
Multiple choices are available for the liner of converter and the material of electrode;
Pulse and 4-20mAstandard current output. Multiple choices of communications:RS232, RS485, HART, Modbus, Profibus, etc.
Explosion-proof type can be used at relevant explosion-proof sites. IP68 remote type can be used underwater.
Variable forms for different kinds of working conditions.Compact and remote form; flanged, flanged wafer, clamped, threaded, insertion end connection; DC/AC, battery power supply.

Item	Compact type			Remote type
	Flange connection	Inserted type	Threaded connection	Flange connection	Inserted type	Threaded connection
Caliber(mm)	15~3000	125~3000	10~25	15~3000	125~3000	10~25
Pressure(MPa)	0.6,1.0,1.6,4.0
Accuracy	±0.5%, ±0.3%(±0.2% available for special order)
Applicable medium	Conductive liquid and slurry
Medium Temperature	≤150°C
Medium Conductivity	≥5μS/cm
Medium Velocity	≤15 m/s
Ambient	Temperature:-25°C~+60°C, Humidity: 5%~90%
Liner Material	DN10mm~32mm: Polytetrafluoroethylene(F4), Polyurethane; DN40mm~1000mm: F4, Polyurethane, Polychloropree rubber; DN1000mm~3000mm: Polychloropree rubber; Others: Polyvinyl fluoride, Fluorinated ethylene-propylene(FEP), etc.
Electrode Material	Mo-containing stainless steel, Hastelloy B, Hastelloy C, Titanium alloy, Tantalum alloy, Platinum-iridium alloy, Stainless steel-coated tungsten carbide
Electrode Type	Fixed type(DN150~DN2600); Blade type(DN300~DN1600)
Flange Material	SS, CS
Communication	RS485, RS232, HART, Modbus, Profibus-DP
Signal Output	Analog 4-20mA, pulse, isolated, load resistor≤750Ω
Power Supply	AC 85-265V, 45-63Hz, power≤20W; DC 11-40V; lithium battery(3.6V)			AC 85-265V, 45-63Hz, power≤20W; DC 11-40V
Display	LCD display with back light.			Intelligent flow totalizer display.
Protection Grade	IP65			IP65, IP67, IP68
Explosion- proof Grade	ExdmⅡCT4, mdⅡBT4			non

View Complete Details

Ask Latest Price & Details

Furnace Oil Flow Meter

Enclosure Aluminum anodize/S.S-304/S.S-316
Rotor Aluminum anodize/S.S-316/PPS
O-ring NBR/Viton
Shaft Hard Stainless Steel-316
Accuracy (standard installation position) +/- 0.5% ( Higher on request)
Maximum working pressure 10MPa
Fluid &Ambient temperature -40 to80 Deg
Power voltage 5 - 24V DC
Connection Threaded M/F / Flange

View Complete Details

Ask Latest Price & Details

Gas Flow Meter

1. Service Bio-Gas, Compressed Air, Compressed Gas, LPG, Steam.
2. Size ½” to 14”
3. Type of Flow meter Differential Pressure Type.
4. Flow Element Orifice / Integral Orifice / Nozzle
5. MOC of Flow Element SS 316
6. Density Compensation Can be provided.
7. Type of Flanges WNRF (Weld Neck Raised Face)
8. MOC of Flange C.S / S.S / P.P.
9. Flange Rating ANSI 150 / ANSI 300 / ANSI 600
10. Type Of Taps Flanged Tapping / Corner Tapping / D & D/2
11. No. Of DP Tappings 1 Pair
12. No. Of Drain Tappings 1 Pair
13. Design Standard BS - 1042 / ISO
14. Accuracy ± 1% of actual reading (Flowmeter)

View Complete Details

Ask Latest Price & Details

Electromagnetic Flow Meter

Accuracy +/-0.5% of Actual Flow Rate (+/- 0.3%, +/-0.2% on request)
Repeatability +/- 0.2% F.S
CERTIFICATIN CE CERTIFIED
METERINGTUBE S.S 304
ELECTRODE S.S 316
FLANGE C.S.
LINING PTFE
END CONNECTION ASA150#Flanged as per B 16.5.
MOUNTING Inline
MIN CONDUCTIVITY 10 uS/cm
MAX PROCESS TEMP. 0-60 deg C Normally ( Higher Temperature Available)
PRESSURERATING 10 Bar ( Higher Pressuer Available)
MAINSPOWER 230 V AC 50Hz / 24 V DC
ENCLOSURE M.O.C. Cast Aluminum IP65Signal Amplifier Box
CABLE ENTRY PG-9 / PG-11
FLOW UNIT Selectable.
EMPTY PIPEDETECTION Available
LOW CUTTOFF Available
Output 4 – 20 Ma
COMMUNICATION RS 485 MODBUS
DIRECTION Suitable for Bi- Directional
PROGRAMMING Through Key/ Keypad on front facia.
TERMINALS Shock – Hazard – Protected screwless terminals.
SIGNAL CONVERTOR Integral / Remote (with 3 meterCable)
INTERCHANGE ABILITY Fully interchangeable with all sizes of flow sensors.
POWERFAILURE MODE Provision of RAM/PROM to store parameter entered and measured flow dataduring

View Complete Details

Ask Latest Price & Details

Insertion Type Electromagnetic Flow Meter

Accuracy +/-0.03 m/Sec +/- 1% of velocity
Medium Conductivity >5 uS/cm
Pipe Sizes >200 mm < 3 mtrs
Probe material SS 304
Electrodes SS 316L
Sensor Material Epoxy
Flow Velocity Ranges 0.1 to 10 m/s in two ranges ( 0 to 5 m/sec & 0 to 10 m/sec)
Pressure Rating 10 bar Standard , Higher pressure ratings on request
Operating Temperature Medium 0 to 60 Deg.C
Pressure Rating………………… 10 Bar at 55ºC (20 Bar optional)
Operating Temperature Ambient 0 to 55 Deg. C for Converter

View Complete Details

Ask Latest Price & Details

Oval Gear Flow Sensor

Enclosure Aluminum anodize/S.S-304/S.S-316
Rotor Aluminum anodize/S.S-316/PPS
O-ring NBR/Viton
Shaft Hard Stainless Steel-316
Accuracy (standard installation position) +/- 0.5% ( Higher on request)
Maximum working pressure 10MPa
Fluid &Ambient temperature -40 to80 Deg
Power voltage 5 - 24V DC
Connection Threaded M/F / Flange

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Rohan Chalke (Cbro Incorporation)
B-204 Princeton Hirananadani Estate G. B. Road ThaneMaharashtra400607India, Mumbra
Share us via
Call 08069182197 Ext. 741
Found Something Wrong with this Listing? Report Here.

Our Products