Write a Review
Our Products
We offer a complete product range of CONICAL CONDUCTOR, Spherical Conductor, General Biology Charts, Interchangeable Joint and Horsetail Plant
Suitable for heavy soils, helix, 200mm long x 38 mm dia on stem, with eye for tommy bar, overall length 650 mm.
Glass J-tube made out of thick-walled capillary tubing, with a brass screw & collar at end of longer limb. Used for sampling small quantities of gas in respiration or photosynthesis experiments
For determinig the pressure exerted by the sap flowing from a stem stump. Manometer graduated 0 to 200 x 1 mm, for attachment by means of rubber tube or tape to the cut stem of a plant growing vigorously in wet soil
Coloured Polyart Plastic Sheet fitted with plastic rollers.
Size 100 x 75 cms.
Set of 18 Human Anatomy charts, size 87 x 57 cms., printed on art paper, laminated and fitted with rollers.
Rigid polythene, medium wall, screw capped with stopcock.
Used to cut them sections of Microscopic materials. Suitable for practical in microscopy. Can be securely attached to the edge of bench, table or work surface with the help of fixing clamp. Stage dia. 80mm. vertical lift 20 mm. and least count 0.01 mm.
Single pan, total Capacity of 2610gm (Using attachments weights) sensitive to 0.1gm The three beams are each provided with a sliding weight and are graduated 0-500x100g, 0-100 x 10gm and 0-10x0.1gm respectively, permitting reading up to 610gm without the use of attachment weight. Magnetic damping of the beam provides quick accurate weighing, with stainless steel pan 150mm diameter.
Accessories Attachmentweights up to Two 1 kg and one-500gm weights with stainless steel knife edge suspension for attachments to suspension pivot on the beam, to increase the capacity of the valance up to 2610gm.
Brass cone 10x5 cm (Length x Max. Diameter) on insulated stand)
Made of brass, nickel plated, mounted on stand, with a 5cm wide opening at the top.
Optically worked back slivered with protective coating
a) Diameter 50mm, fl 75, 100, 150, 200, 250 and 300
b) Diameter 75mm, Fl 75, 100, 150, 200, 250 and 300mm
Set of 12 General Biology charts, size 87 x 57 cms., printed on art paper, laminated and fitted with rollers.
With a bulb in a siphon tube near the top to aid in the siphoning action. The siphon tube is protected from accidental damage by the vapour tube size capacity 60ml 100ml, 200ml.
30 mm. high x 10 mm. diameter .
Specimens of vegetative and reproductive shoots of equisetum illustrate the jointed stems and ribbed texture of this genus.
Paramecium, enlarged approx. 1600 times. The model shows the cell inventory of a protozoa: macro and micronucleus, contractile vacuoles, cytostome with membranellae, myonemes and food vacuoles and the formation of the endo and ectoplasm and the network of neuronemes. A detailed block shows the structure of the pellicle of the ectoplasm, and the position and order of the trichocysts and a range of cilia in typical order. Separates into 2 parts, on base.
Specific Gravity, shot poised range 0.70 to 2.00 subdivided in 0.01 . Overall length approximately. 380 mm.
Circular scale, heavy pattern, suspension and load hooks.
| Capacity | Sub-division | |
| .01 | 1 kg. | 5gm. |
| .02 | 10 Kg. | 50 gm. |
| .03 | 20 Kg. | 100 gm. |
| .04 | 50 Kg. | 200 gm. |
| .05 | 100 Kg. | 500 gm. |
Specially designed balance for Schools, Colleges, Universities.
Simple easy flourescent display.
| Built - | in calibration weight. |
| Capacity - | 210 gm. |
| Readability - | 0.1 mg. |
| Stablisation time approx.- | 5 sec. |
| Senstivity Drift (10°C - 30°C) ± 2 ppm / °C | |
| Weighing Pan dimensions 85 mm. dia. | |
| Density of solids can also be determined with optional density kit. | |
Chrome plated brass weights, in polished velvet lined wooden case, with hinged lid. Divided compartments with dust cover holds nickel-silver and aluminum fractions. With chrome plated brass forceps. Accuracy + 5 mg.
Made of hardwood. Size 30x9x5 cm with two rows of 10 holes each for standing tuning forks. Polished and lacquered. (Without Forks)
With hanging eye for storage. Robust and ribbed on outside to eliminate back pressure. Top dia. 17 cm.
Density ball is used demonstrate the effects of temperature and mineral content on density. The metal ball will float in cold water, and sink in hot! The density of water is not constant but depends upon several factors. The effects of salinity and temperature play a large role in the flow of earth's ocean currents. The Density Ball can be used by varying salt content as well as temperature, to show the effects on density.
To provide external magnetic field where required and to change the rate of magnetic flux passing through a coil.
Consists of a plastic spool with windings of insulated copper. End plates have brass binding posts. Capacity 10 amperes when used intermittently and 5 amperes when used continuously.
4mm Pin, 18mm long spring insert and hard plastic body. Overall lenght of plug 40mm.
Made of seasoned wood which is covered with nonscaring, washable, synthetic EVA sheet suitable for repeated pinning without leaving pin marks. Grooves smoothly adjustable in width for various sizes of abdomen of various insects upto 12mm. Chrome plated brass fittings are used.
Polished brass, in polished hardwood case with hinged lid. Divided compartment with dust cover. With chrome plated brass forceps.
| Type | Weighing cap. |
| .01 | Cap. 500 gm., comprising 1 x 200 gm., 2 x 100 gm., 1 x 50 gm., 1 x 20 gm., 2 x 10 gm., 1 x 5 gm., 2 x 2 gm. & 1 x 1 gm. |
| .02 | Cap. 1000 gm., comprising 1 x 500 gm., 1 x 200 gm., 2 x 100 gm., 1 x 50 gm., 1 x 20 gm., 2 x 10 gm., 1 x 5 gm., 2 x 2 gm. & 1 x 1 gm. |
For precise adjustment of height o f equipment above laboratory table, with screw operated scissor action mechanism, actuated by a large handwheel. The top is 15x15 cm with a threaded hole for a laboratory.
capacity 20 Kgs., with two suspension rings and load hook, notched arm with sliding mass and two scales divided 0-5 Kg and 5-20 Kg.
Buchner, with straight sides above the perforated plate.
It has equal arms, durable handy and precision instrument commonly used by factories and laboratories for general weighment. Body made of cast iron and Pans are of metal die pressed
We offer thermometers for accurate temperature measurement in laboratories. It helps in achieving optimum temperature and temperature gradients which aids in obtaining accurate experimental results. The thermometer delivers best results when totally immersed in liquids.
The thermometer is filled with mercury, whose sensitivity delivers accurate results. Its stem is engraved with white enameled back, which aids in the clear viewing of the readings. The thermometer has a 5-7 mm diameter with appropriate length. It has reinforced bulbs in card board case. The thermometer deliver results with a 1 of accuracy
2) ROUND SHAPE TOP STAINLESS STEEL (Single Plate)
8" Dia fitted on Iron metal sheet body. Temperature range 240C Temperature controlled by Energy Regulator. To work on 220 Volts A.C. complete with 3 core wire and plug.
b) -do but DOUBLE HOT PLATE in one row having with individual ENERGY REGULATOR. Complete with wire and plug. TOP STAINLESS STEEL.
Showing all the general structure and skeleton of fish. On base. Numbered with English Key Card.
Amoeba proteus, enlarged approx. 1000 times. In a small pseudopodium which can be opened up showing the structure after electron microscopic magnification. On a base with explanatory notes. Separates into 2 parts. Numbered with English Key Card.
Made of best steel points for outside and inside measurements. Two venires and two graduated in mm and inches
Two prong, comprised alloy pressure diecasting with other parts of plated brass, clamp accepts articles form 15-60 mm dia actuated by nickel plated brass pummels and twin screw, the jaws are cork lined. Fitted with 15 cm. long mild steel or aluminium rod.
Collection includes foliose, crustose, and fruticose lichens specimens.
A range of economic, accurate, variable volume micro-pipettes.Models 0.5 ul to 5000 ul. They are fully autoclavable to 121. Capacity ul: 0.5-2 , 1-10, 2-20, 10-100, 20-200, 200-1000, 1000-5000
Polypropylene in two piece, light weight and autoclavable. Top portion can be fitted with the lower forming a vacuum seal which does not requires greasing. Base of top portion has a perforated filter plate.
For studying electromagnetic induction, ferromagnetism and principles of a transformer.
Consists of two coils wound with enamelled copper wire over heavy plastic spools fitting one within the other. The inner primary coil has 1250 turns of heavy wire and the outer, acting as secondary coil with 250 turns of fine wires. Square supports of thick insulating material are used as vertical or horizontal mount. Both coils are equipped with binding posts and a soft iron core for induction studies.
In this compass the accurately balances needle is provided working on a hard red steel pivot. The unit is mounted in an Aluminum case with glass top and bottom diameter 20mm
Evaporating dishes, flat bottom with pour out size approximate O.D X Height mm
80x45mm
105x55mm
150x80mm
Collection includes Sea Lettuce, green algae, and two species of brown algae.
Capital Lab (Capital Lab)
#28, Staff Road, Opposite Amba Complex Cantt - ,, Ambala Cantt, Haryana - 133001, India
Share us via
View Contact Number 
