Post Buy Requirement

Our Products

Leading Manufacturer, Supplier & Retailer of Dissolution Offline Sampling System.

Dissolution Offline Sampling System

Campbell Electronics has launched new Tablet Dissolution System DRS-Series represents the very latest in tablet testing technology. Excellent production techniques combined with modern microprocessor design guarantee the highest standards of performance and reliability. All dissolution testers meets the latest specifications as laid down in the European, United States and associated pharmacopoeia.

Features

Compact, light weight stirrer unit and easy to use, rugged.
Conforms to all current USP and EP specifications.
Available in 8 test vessels.
Connectivity of off-line sampling system.
User-friendly operating procedure.
Ergonomically designed membrane keypad
40X4 LCD screen with yellow backlit
Connectivity of Motorized sampling manifold
In-built tablet dispenser
Minimized and easy validation procedure.
Supports single step / multi step dissolution
Circulation pump together with SS geyser for better temperature control
Safety features
Up to 12 programmable steps / sample intervals.
Validation protocol

Control Panel Controls Membrane Keypad
Display 40character, 4 line, back-lit LCD
Speed control Range 10 to 300 RPM (±2%)
Temperature Control Controller Microprocessor based controller with circulator
Range Ambient -40ºC (±0.3ºC)
Test Types Single step dissolution
Multi step dissolution (1-12 steps)
Step Duration up to 99:59:59
View Complete Details

Tablet Inspection Machine

  • Display LCD Display
  • Length 200 cm
  • Width 50cm
  • Net Weight 320 Kgs.
This machine is specially designed for 100% visual inspection of tablets from both sides and 1, 00, 000 tablets per hour can be inspected on this GMP Model by employing 2 operators thereby reducing inspection cost considerably.Tablet Inspection belt consist of stainless steel complete body, S.S Hopper from which tablets fall on a magnetic vibrator that removes chips and dust from the tablets and feed them on 6 inches wide belt for one operator to inspect the other side of the tablets (minimum size of the tablet 3 mm & maximum size of the tablet 19 mm.)
View Complete Details

Antibiotic Zone Reader

  • Power 230 V 50 Hz 110 V 50/60 Hz (Optional)
  • Size 275 mm (L) x 265 mm (W) x 390 mm (H)
  • Weight Net 10 Kgs
The antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibition zone in a petri-dish.In use, the discs are placed on a petri-dish prepared with agar and inoculated with bacteria. After incubation, the bacteria cover the entire dish except for a circular inhibition zone around, it being a function of the strength of the antibiotic.
View Complete Details

Digital Antibiotic Zone Reader

The antibiotic zone reader provides a rapid accurate method for determining the strength of antibiotic materials by measuring the diameter of an inhibition zone in a petri-dish.

In use, the discs are placed on a petri-dish prepared with agar and inoculated with bacteria. After incubation, the bacteria cover the entire dish except for a circular inhibition zone around, it being a function of the strength of the antibiotic.
This zone reader measures the diameter of the inhibition zone to 0.02 mm within range of 0 to 35 mm diameter. Light from a source from the top, passes through the transparent and semitransparent portions of the agar, then to a reflecting mirror supported by an arm above the unit. The mirror reflects the light to glass prism mounted at the front of the unit and magnified image of the zone of inhibition is clearly visible on the prism.

Features

Accurate method for determining the strength of antibiotic material
Micro processor based design
Average of Vertical diameter & Horizontal diameter of inhibited zone
Magnified image of inhibited zone is clearly visible on the prism
Calibration facility
Printout facility
Facility to store 4 zones (optional 6 zones)
IQ / OQ Documentation

.

Advantages

An accurate method of determining the strength of antibiotic materials.
Magnified image of the inhibition zone is clearly visible on the prism.
Less time-consuming for measuring the accurate diameter of an inhibited zone ( 0.1 mm).
Easy to operate for single person.
Display shows direct reading.
Vertical & horizontal reading of the zone stored in memory

Power 230 V 50 Hz
110 V 50/60 Hz (Optional)
Size 275 mm (L) x 265 mm (W) x 390 mm (H)
Weight Net 10 Kgs
View Complete Details

Tablet Inspection Belt

  • Length 200 cm
  • Height 150 cm
  • Width 50cm
Tablet Inspection belt consist of stainless steel complete body, S.S Hopper from which tablets fall on a magnetic vibrator that removes chips and dust from the tablets and feed them on 6 inches wide belt for one operator to inspect the other side of the tablets (minimum size of the tablet 3 mm & maximum size of the tablet 19 mm.)
View Complete Details

Bulk Density Meter

  • Weight 15 kgs
  • Dimension 280 mm x 290 mm x 275 mm
Powder Density is specially designed to study the packing down of powder beds of different pharmaceuticals and chemicals powders, flakes, pellets, granules and other bulk substances. Powder Density is an essential test required in the process of tablet manufacturing, Capsule filling and cosmetic manufacturing. The Powder density apparatus is equipped with Microcomputer Based 'LCD Display' System. The "Switches" are provided on the front panel of the apparatus for setting total number of strokes to the glass cylinders. Each stroke of the cylinder is displayed on the "LCD Display' window on the panel. The Up and down movement of the cylinders stop automatically at the Pre-set number.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us