Cable Connector

Sitabuldi, Nagpur, Maharashtra

O Vision Gold Amplifier Delux is capable of producing more gain. combines pre-amp compression (distortion) with power amp distortion.

O-vision Gold WDM PON EDFA (16 x 17 dbm) has High power Erbium Doped Fiber Amplifier, it is the core equipment of threeof one net in the optical transmitter system. plug-in dual power supply, achieved the function of OLT and CATV 1550nm optical single combined and amplify, having high cost performance value.

O-Vision Gold EDFA 23 DBM (4 out x 16.5DB ) is used to cascaded amplification in the CATV system, It has high saturated output power, low distortion In addition, the gain fiber of EDFA is single-mode and single-clad fiber, pump is directly coupled into fiber core, while fiber core is very small, it is required the pump is single-mode.

Economy amplifier used in trunk line as well as distribution line cable transmission system and it can offer high quality video transmission service. Economically and specially designed to serve CATV network.

Optilink Economy amplifier used in trunk line as well as distribution line cable transmission system and it can offer high quality video transmission service. Economically and specially designed to serve CATV network.

Optilink Amplifire Delux is used in cable transmission system and it can offer high quality video transmission service.The equipment adopts (SMT)surface mounting technology with elegant appearance and reliable performance. It is with Aluminium housing providing maximun heat dissipation specially designed to serve CATV network

Optilink DC Amplifier 35V 2 AMP gives high performance at analog and digital signals. 500 channels loading capacity, 30db gain and high voltage. Providing slope control aluminium housing heatsink

Catvision EDFA 23DBM (4 out x 15.4 DB) mainly used for CATV network and telecommunication network. It design according to the communication level standard, in terms of power, precision and high reliability. The signal of the data optical fiber transmission over a long distance.

Optilink EDFA 23DBM (4 out x 16.5 DBM ) single pumpis a erbium doped fiber amplifier. It amplifies the 1550nm CATV fiber optic signal, keeps the C/N, CSO, CTB & picture quality qt original levels for long-haul transmission.

Optilink EDFA (4 out x 16.5 DBM) dual pump is used to boost the intensity of optical signals being carried through a fiber optic communications system. Dual pump EDFA consists of Dual Synchronize Pump (dsP) with increased efficiency for amplifying 1550nm optical signal.

1. First Pump of 980nm pre-amplifies the input optic signal to achieve higher C/N. 2. The 2nd pump of 1480nm is synchronized to achieve higher output levels of 1550nm laser 3. Complete Aluminum body for better performance and heat dissipation 4. Dual power support for 100% availability 5. RS232 and Ethernet port for management 6. Optional SNMP functionality

Optilink WDM PON EDFA (8 out x 17DBM) is an optical repeater device that is used to boost the intensity of optical signals being carried through a fiber optic communications system. Dual pump EDFA consists of Dual Synchronize Pump (dsP) with increased efficiency for amplifying 1550nm optical signal.

Optilink WDM PON EDFA (16 out x 19 dbm ) is for amplifying the 1550nm wavelength with CWDM built-in. 16 outputs with 38 dBm total power, 19 dBm each port.Ideal to amplify and multiplex to a single optical output the signal from a CATV optical transmitter (1550nm) with the signal from the OLT (1310 / 1490nm)low noise, high performance, FTTP high power, multi-ports optical amplifier with gain spectrum band within 1530-1565nm. This opticalamplifier can be compatible with any FlTx PON Technology. It offers a flexible and low-cost solution for three-network integration and Fiber to the Home.

Optilink EDFA 16 out (16 out x 22 dbm) has 16 ports of 22 dBm output ports.high output power (22 dB guaranteed) and low noise level. It works in the spectrum band of 1530 - 1565 nm. Each output port of the optical amplifier, SC / APC connector, has a built-in CWDM multiplexing. It has 16 PON input ports, with SC / PC connector, each of them can be joined with a PON output of the OLT. CATV connector connector SC / APC.

Optilink WDM PON EDFA(32 out x 19 dbm) is used to combine the CATV signal and OLT signal and boost up the power of CATV signal.It mainly describes the performance characteristics, technical Parameters, Installation and debugging. common troubleshooting, and other related content of the product. Perfect network Management interface, in the line with standard SNMP network management. Single mode fiber 1550 amplification network FTTH Network CATV Network

O-Vision Gold WDM PON EDFA (16out x 19 dbm)has Series PON+CATV EDFA Combiner, High power Erbium Doped FiberAmplifier, it is the core equipment of three of one net in the optical transmitter system, . This optical amplifier can be compatible with any FlTx PON Technology. It offers a flexible and low-cost solution for three-network integration and Fiber to the Home. plug-in dual power supply, achieved the function of OLT and CATV 1550nm optical single combined and amplify, having high cost performance value.

O-Vision Gold WDM PON EDFA(32 out x 19 dbm) is used to combine the CATV signal and OLT signal and boost up the power of CATV signal.It mainly describes the performance characteristics, technical Parameters, Installation and debugging. common troubleshooting, and other related content of the product.

O-Vision Gold WDM PON EDFA(8 out x 19 dbm) is high power edfa with 19 dbm power output each port.Mainly used in CATV industry, Fiber to home and ISP etc.

O-Vision Gold WDM PON EDFA(4 out x 17 dbm) has dual power supply. 4output port device. SC/APC&SC/PC&LC/APC connector used.Two stage amplification with low noise figure. adopts High power EYDFA. LCD at the front of panel offers index of equipment and warning alarm.The built-in light echo detection, avoid damage jump stitches

Optilink EDFA (8OUT X 16 DBM) has 16 dBm optical output per port.It has rugged, low-profile, high-efficiency EDFA design utilizes powerful and reliable pump amplifiers in a two-stage design with interstage isolators. The units wide optical input range accepts a single optical input and provides a total composite/ saturated output power of up to 400 mW

Optilink EDFA (8OUT X 19 DBM) designed for use in CATV, FTTX and HFC application. It is optimized for 1550nm wavelength. The product offering is flexible enough to perform all the requirements of CATV, FTTX and HFC applications. The device chooses a high performance PUMP laser and circuit (include ACC and APC) and optical output power is adjustable and flexible for network link loss budget.