Verified
Write a Review
We C. N. Industrial Products are a leading and distinguished Manufacturer, Exporter and Supplier of quality Auto feeder Roll & cloth, Automotive Components, BEARING, Blades and Cleaning Machines & Equipments.
A gear is a rotating machine part having cut teeth which mesh with another toothed part in order to transmit torque. Two or more gears working in tandem are called a transmission and can produce a mechanical advantage through a gear ratio and thus may be considered a simple machine. Geared devices can change the speed, torque, and direction of a power source. The most common situation is for a gear to mesh with another gear; however, a gear can also mesh with a non-rotating toothed part, called a rack, thereby producing translation instead of rotation. The gears in a transmission are analogous to the wheels in a pulley. An advantage of gears is that the teeth of a gear prevent slipping. When two gears of unequal number of teeth are combined, a mechanical advantage is produced, with both the rotational speeds and the torques of the two gears differing in a simple relationship. In transmissions which offer multiple gear ratios, such as bicycles and cars, the term gear, as infirst gear, refers to a gear ratio rather than an actual physical gear. The term is used to describe similar devices even when the gear ratio is continuous rather than discrete, or when the device does not actually contain any gears, as in a continuously variable transmission. We are offering a wide range of Ginning Machine Spares like All Types of Gear. Our range of gears is available in variety of standard and custom ordered dimensions depending upon the needs of our clients. We manufacture and deliver these gears to our clients at industry leading prices and within committed time period.
We are offering a wide range of Cotton Ginning Machine Spares like Back Knife. These are widely appreciated for their exceptional features like high efficiency, accurate size, sturdy construction, durability etc. With such set standards and quality parameters of our products, we have spread our market reach to newer regions worldwide market.
A pin is a device used for fastening objects or material together. Pins often have two components: a long body and sharp tip made of steel, or occasionally copper or brass, and a larger head often made of plastic. The sharpened body penetrates the material, while the larger head provides a driving surface. It is formed by drawing out a thin wire, sharpening the tip, and adding a head. Nails are related, but are typically larger. In machines and engineering, pins are commonly used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. In engineering and machine design, a pin is a machine element that secures the position of two or more parts of a machine relative to each other. A large variety of types has been known for a long time, the most commonly used are solid cylindrical pins, solid tapered pins, groove pins, slotted spring pins and spirally coiled spring pins. We are offering a wide range of Ginning Machine Parts like Weight Leaver Pin o/s & g/s. The offered products are fabricated at our well-equipped manufacturing unit with the use of advanced machines and cutting-edge technology. These are stringently tested on various parameters of quality in order to deliver flawless range at the clients end.
We are offering a wide range of Cotton Ginning Machine Parts like Swing Lever. Manufactured as per the set industry standards, we are also engaged in custom designing of these levers, if requested by our customers for industry specific usage. Available at industry leading prices, these are high in demand amongst our valued customers.
A textile or cloth is a flexible woven material consisting of a network of natural or artificial fibres often referred to as thread or yarn. Yarn is produced by spinning raw fibres ofwool, flax, cotton, or other material to produce long strands. The words fabric and cloth are used in textile assembly trades as synonyms for textile. However, there are subtle differences in these terms in specialized usage. Textile refers to any material made of interlacing fibres. We are offering a wide range of Ginning Machine Spares.Our range of cloth is available in variety of standard and custom ordered dimensions depending upon the needs of our clients. We manufacture and deliver these autofeeder cloth to our clients at industry leading prices and within committed time period.
A pulley is a wheel on an axle that is designed to support movement of a cable or belt along its circumference.Pulleys are used in a variety of ways to lift loads, apply forces, and to transmit power. A pulley is also called a sheave or drum and may have a groove between two flangesaround its circumference. The drive element of a pulley system can be a rope, cable, belt, or chain that runs over the pulley inside the groove. We are offering a wide range of Ginning Machine Spares. Our range of pully is available in variety of standard and custom ordered dimensions depending upon the needs of our clients. We manufacture and deliver these pully to our clients at industry leading prices and within committed time period.
oil sealA device for preventing the entry or return of oil from a chamber.A device using oil as the sealing medium to prevent the passage of fluid from one chamber to another. In machines, a device that prevents the passage of fluids along a rotating shaft. Seals are necessary when a shaft extends from a housing (enclosure) containing oil, such as a pump or a gearbox. Leather, synthetic rubber, and silicones are among the materials used for the sealing ring. We Are Provide All Types Oil Seal Of Ginning Machine. Our stringent quality checks assures our range in compliance with set industrial norms and standards. Our team of professionals are familiar with the changing market demand and brings the most innovative and technical sound range.
We are offering a wide range of Ginning Machine Spares.Our range of Parts is available in variety of standard and custom ordered dimensions depending upon the needs of our clients. We manufacture and deliver these Parts to our clients at industry leading prices and within committed time period.
A bearing is a machine element that constrains relative motion between moving parts to only the desired motion. The design of the bearing may, for example, provide for free linearmovement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Bearings are classified broadly according to the type of operation, the motions allowed, or to the directions of the loads (forces) applied to the parts. We are offering a wide range of Ginning Machine Spares.Our range of Parts is available in variety of standard and custom ordered dimensions depending upon the needs of our clients. We manufacture and deliver these Parts to our clients at industry leading prices and within committed time period.
