Our Products
Bolts
2 Products availableCeramic & Clay Crafts
2 Products availableNuts Bolts And Fasteners
1 Products availableBuilding Hardware
1 Products availableBrake Parts
1 Products availableLubricants
1 Products availableHammers, Pliers & Screwdrivers
1 Products availableFurnace Parts
1 Products availableWe offer the best product range of Test Molds, Large Ejector Pins, ground ejector pins and Ejector Pins.
Test Bar Mold
Spectrographic Coupon Mold
These pins are designed for your large ejector pin requirements and are accurately machined in a complete range of lengths.
Made from high carbon steel and centerless ground; each pin is furnished with two semi-finished hex nuts and two semi-finished hex jam nuts.
For applications where smaller pins are desired, see the separate catalogue sheet for a complete listing.
Please refer to the Typical Permanent Mold Assembly sheet and individual catalogue sheets fro all your permanent mold component requirements.
Part Number |
A |
B |
C |
Reamer Size |
99065 |
0.5000 |
6 |
1/2 - 20 x 3 |
0.505 |
99066 |
0.5000 |
7 |
1/2 - 20 x 3 |
0.505 |
99067 |
0.5000 |
8 |
1/2 - 20 x 3 |
0.505 |
99068 |
0.5000 |
9 |
1/2 - 20 x 3 |
0.505 |
99069 |
0.5000 |
10 |
1/2 - 20 x 3 |
0.505 |
99070 |
0.5000 |
11 |
1/2 - 20 x 3 |
0.505 |
99071 |
0.5000 |
12 |
1/2 - 20 x 3 |
0.505 |
99072 |
0.5000 |
13 |
1/2 - 20 x 3 |
0.505 |
99073 |
0.5000 |
14 |
1/2 - 20 x 3 |
0.505 |
99080 |
0.6250 |
8 |
5/8 - 18 x 3 |
0.630 |
99081 |
0.6250 |
9 |
5/8 - 18 x 3 |
0.630 |
99082 |
0.6250 |
10 |
5/8 - 18 x 3 |
0.630 |
99083 |
0.6250 |
11 |
5/8 - 18 x 3 |
0.630 |
99084 |
0.6250 |
12 |
5/8 - 18 x 3 |
0.630 |
99085 |
0.6250 |
13 |
5/8 - 18 x 3 |
0.630 |
99086 |
0.6250 |
14 |
5/8 - 18 x 3 |
0.630 |
99087 |
0.6250 |
15 |
5/8 - 18 x 3 |
0.630 |
99088 |
0.6250 |
16 |
5/8 - 18 x 3 |
0.630 |
Stahl centerless ground ejector pins are made from high carbon steel from durability in operation.
Two semi-finished hex nuts and two semi-finished hex jam nuts are furnished with each pin.
For applications that require longer lengths or where rigidity is considered important we suggest the use of Stahl standard stock extensions for ejector pins.
Please refer to the Typical Permanent Mold Assembly sheet and individual catalogue sheets for all your permanent mold component requirements.
Part Number |
A |
B |
C |
88893 |
6 - 32 x 1 |
4 1/2 |
0.1285 (No. 30) |
98978 |
10 - 32 x 2 1/2 |
4 |
0.191 (No. 11) |
98980 |
10 - 32 x 2 1/2 |
5 |
0.191 (No. 11) |
98982 |
10 - 32 x 2 |
6 |
0.191 (No. 11) |
98988 |
1/4 - 28 x 2 1/2 |
4 |
0.250 (E) |
98989 |
1/4 - 28 x 2 1/2 |
5 |
0.250 (E) |
98990 |
1/4 - 28 x 3 |
6 |
0.250 (E) |
98992 |
1/4 - 28 x 3 |
7 |
0.250 (E) |
98994 |
1/4 - 28 x 3 |
8 |
0.250 (E) |
91205 |
1/4 - 28 x 3 |
9 |
0.250 (E) |
99017 |
1/4 - 28 x 3 |
10 |
0.250 (E) |
98998 |
5/16 - 24 x 2 1/2 |
4 |
0.316 (O) |
98999 |
5/16 - 24 x 2 1/2 |
5 |
0.316 (O) |
99001 |
5/16 - 24 x 3 |
6 |
0.316 (O) |
99003 |
5/16 - 24 x 3 |
7 |
0.316 (O) |
99005 |
5/16 - 24 x 3 |
8 |
0.316 (O) |
99007 |
5/16 - 24 x 3 |
9 |
0.316 (O) |
99009 |
5/16 - 24 x 3 |
10 |
0.316 (O) |
99010 |
5/16 - 24 x 3 |
11 |
0.316 (O) |
99011 |
5/16 - 24 x 3 |
12 |
0.316 (O) |
99012 |
5/16 - 24 x 3 |
13 |
0.316 (O) |
99013 |
5/16 - 24 x 3 |
14 |
0.316 (O) |
99050 |
3/8 - 24 x 2 1/2 |
4 |
0.377 (V) |
99051 |
3/8 - 24 x 2 1/2 |
5 |
0.377 (V) |
99052 |
3/8 - 24 x 3 |
6 |
0.377 (V) |
99053 |
3/8 - 24 x 3 |
7 |
0.377 (V) |
99055 |
3/8 - 24 x 3 |
8 |
0.377 (V) |
99016 |
3/8 - 24 x 3 |
9 |
0.377 (V) |
99058 |
3/8 - 24 x 3 |
10 |
0.377 (V) |
99020 |
3/8 - 24 x 3 |
12 |
0.377 (V) |
Extensions for ejector pins are recommended for applications where rigidity is considered very important or when standard stock ejector pins are not available in the required length.
Each extension is accurately machined from cold finished steel bars and furnished with two semi-finished hex nuts and two semi-finished hex jam nuts.
Please refer to the Typical Permanent Mold Assembly sheet and individual catalogue sheets for all your permanent mold component requirements.
Part Number |
A |
B |
C |
D |
Ejector Pins Used With |
99028 |
0.5000 |
6 |
10 - 32 x 3/4 |
1/2 - 20 x 3 1/2 |
0.1875 |
99029 |
0.5000 |
8 |
10 - 32 x 3/4 |
1/2 - 20 x 3 1/2 |
0.1875 |
99030 |
0.5000 |
12 |
10 - 32 x 3/4 |
1/2 - 20 x 3 1/2 |
0.1875 |
99033 |
0.5000 |
6 |
1/4 - 28 x 1 |
1/2 - 20 x 3 1/2 |
0.2460 |
99034 |
0.5000 |
8 |
1/4 - 28 x 1 |
1/2 - 20 x 3 1/2 |
0.2460 |
99035 |
0.5000 |
12 |
1/4 - 28 x 1 |
1/2 - 20 x 3 1/2 |
0.2460 |
99023 |
0.5000 |
6 |
5/16 - 24 x 1 |
1/2 - 20 x 3 1/2 |
0.3125 |
99024 |
0.5000 |
8 |
5/16 - 24 x 1 |
1/2 - 20 x 3 1/2 |
0.3125 |
99025 |
0.5000 |
12 |
5/16 - 24 x 1 |
1/2 - 20 x 3 1/2 |
0.3125 |
99038 |
0.5000 |
6 |
3/8 - 24 x 1 |
1/2 - 20 x 3 1/2 |
0.3750 |
99039 |
0.5000 |
8 |
3/8 - 24 x 1 |
1/2 - 20 x 3 1/2 |
0.3750 |
99040 |
0.5000 |
12 |
3/8 - 24 x 1 |
1/2 - 20 x 3 1/2 |
0.3750 |