Our Products
Bolts
2 Products availableCeramic & Clay Crafts
2 Products availableCooling Tower
1 Products availableBakery Machine
1 Products availableCooling Tower, Heat Exchanger & Parts
1 Products availableNuts Bolts And Fasteners
1 Products availableBuilding Hardware
1 Products availableBrake Parts
1 Products availableOur Complete range of products are Slide-In Casting Catchers, Swing-In Casting Catchers and Gravity Die Casting Machine.
Features
Cycle Time (min.) |
20 sec. |
|
Capacity (Max.) |
100 lbs. |
(45.36 kg) |
Horizontal Stroke |
36 in. |
(91.5 cm) |
Vertical Stroke |
12 in. |
(30.5cm) |
casting catchers increase production while reducing operator load. They are a available as manual swing-in or fully automatic powered swing-in. The table height is optimized to allow the operator to inspect a casting while the next casting is cooling in the mold. The system utilizes minimal floor space and allows one operator to do the job safely with minimum effort. Tie bar extensions are required when using a swing-in casting caster.
The table height on all swing-in casting catchers is adjustable in 1.5 inch increments.
Rotary action of the powered casting catcher is from a hydraulic rotary actuator. The stroke of the vertical cylinder is eight inches.
Table Size |
Max. Weight |
|||
#2 |
26 X 32 in. |
(66 X 81cm) |
150lbs. |
(68kg.) |
#3 |
26 X 41 in. |
(66 X 104cm) |
200lbs. |
(91kg.) |
#6 |
36 X 51 in. |
(91 X 130cm) |
300lbs. |
(136kg. |
Tilt pouring reduces turbulence as molten metal enters the die cavity, provides shorter cycle times, and requires less metal for feeding systems. Aluminum castings produced in metal molds have a tighter dendrite structure than castings produced in other processes. In addition, aluminum castings are harder and have better pressure characteristics. Value added options, such as sand cores or cast-in ferrous inserts are quite simple.