Chennai, Tamil Nadu, India
Our Products
High Rate Solid Contact Clarifier are the most popular clarifiers in field of water treatment. They are preferred more than any other clarifier because they can handle large flow rate and provide better effluent quality outlet than other clarifiers.
A typical high rate clarifier is circular in shape, the influent is fed to flash mixer to mix the coagulants. Then influent is transferred in center well where the water is distributed in all the directions. The center well also works as flocculation chamber too as it provided with slow speed mixer and flocculation dosing. Then the influent is distributed through the energy dissipating device in radial pattern.
The sludge is continuously driven into the hopper bottom by continuous rating scraper. The bottom of tank is slopped to form a cone shape that helps in funneling the sludge to hopper bottom from which the sludge can be drawn out periodically.
Advantages of High Rate Solid Contact Clarifier
Bioworks supplies, pre engineered multi effect evaporators to clients. Our in house R &D team has developed evaporators for handling concentrated streams of waste water from effluent treatment plants. We understand that every effluent is unique and the constituents of effluent differ from one to another. So we have sponsored lots of research on establishing the right ways to concentrate the waste stream. We have developed evaporators which can provide heat energy to the waste water by oil, electrical coils and steam. This evaporators use forced film, falling film, rising film and thin film evaporation techniques.
Based on the quantity and nature of effluent we can provide the following type of evaporators
We provide SCADA control system for operation and control of the evaporation units. We understand that proper monitoring of flow rates guarantees longer life, trouble free maintenance, easy performance evaluation of the evaporators. We also provide ancillary units like the chemical cleaning system, cooling water network and vaccum systems for the evaporators.
Advantages of Bioworks made evaporators are as below
Zero Liquid Discharge Systems is not about putting big evaporators, crystallizers at end of effluent treatment plants. It is a way of making industries more accountable for the water intake and building trust of communities in large scale industrial set ups. It has been common phenomenon world wide that large scale industries are not welcome into any area because they cause problem with there liquid and air discharges. More over due to rapid urbanization and high number of industries with limited water sources there is no chance of natural dilution, diffusion, self adjustment, self purification, process to occur in water bodies. So governments all over the world are implementing Zero Liquid Policy that help companies builds trust with local communities, improve brand value and makes them accountable to resources of the nation.
Zero Liquid Discharge policy mandates that all the water and liquids waste to be recycled and reused in the industrial compound itself. To achieve Zero Liquid Discharge the whole cycle of intake, process and treatment of water, effluent has be optimized.
Bioworks helps its client to achieve Zero Liquid Discharge in following ways
We offer state of art effluent treatment plants to reclaim the 90-95% of effluent water with conventional and membrane filtration processes. To reclaim the rest of the water we can provide evaporators of following configurations based on the quantity and application
Reverse Osmosis popularly known as RO is most popular membrane filtration world wide. It is used in wide variety of applications like to produce drinking water, to reduce dissolved solids in process feed water and reduce dissolved solids in process effluents from wide range of industries.
Basically RO is the reverse process of natural osmosis. In this process pressure higher than that of the natural Osmotic pressure drives the solvent towards the dilute solution. This technique when applied on water, water with low salts is produced as permeate. In water treatment applications many types of membrane materials and configuration of RO membranes are available. The most popularly used configurations are Disc type RO and Spirally wound type. Based on the complexity and budget constraints a choice between the options is made. Bioworks offer both type of configuration. Bioworks is registered vendor for supply of RO drinking water plants across many states in India.
Applications
Ultra Filtration units contain capillary tubes that are assembled in membrane housing to filter out suspended solids, bacteria, virus and proteins, based on their size and atomic weight. Ultra filtration membranes commonly applied in water treatment are of two type 1)in to out 2) out to in. Both the units have their own advantages and disadvantages. But the working of the membranes is on common principle of sieving of particles in water. Ultra Filtration membranes are made of different material like PES, PVDF, etc.
Ultra filtration units employed are to pre treat the water that is fed to RO systems. The UF filtration of water reduces suspended solids in water, removes colloidal silica and virus, bacteria .Bioworks offer complete automated units for pretreatment of effluent, process waters.
Applications
Water that has been used for various process applications in industries is called effluent. Based on the nature of industry, products produced , type of processes employed complex effluents are produced. This effluents cannot be discharged or reused in the other applications. Effluents must freed of their pollutants, chemically and biologically stabilized before reuse and final polishing.
Every industry produces an effluent of particular nature and there are host of options that can be employed to treat. Bioworks offers a wide range of solutions options to treat effluents. Based on the quantity, availability of funds, land and regulations we offer our solutions to treat effluent water to all kind of industries.
Based on the nature of effluents we employ this processes/systems to achieve the regulations standards. We also offer completely integrated effluent treatment plants that help our customers meet the Zero Liquid discharge standards.
Water for drinking is one of the most essential of all human needs. The quality and quantity of available drinking water set the economic value of a particular region. WHO and Indian organizations have set standards for drinking water. Most of the sources of drinking water dont meet the standards.
Presence of E-Coli, Coliform in bore well water, surface sources, Iron and Arsenic presence in deep well bores, high hardness levels, high dissolved solids level, Fluoride content, Rotten egg smell are some of the most common contaminants that make water not fit for drinking.
Bioworks offers drinking water solutions that helps communities, villages, towns, residential and commercial complexes meet their drinking water requirements. We offer complete end to end solutions for removal of contaminants that make the water undrinkable. Based on the contaminants present one or more of the technologies, equipment has to be integrated to produce drinking water to match the IS 10500:2012 standards.
We offer
