3 Pcs Design (Reduced Bore)

Specification & Features:
Straight Pattern, Open Discharge,
Screwed Male Threads at Inlet to BS 21.
Angle Pattern, Enclosed Discharge, Screwed Male Threads
at Inlet and Screwed Female Ends at Outlet to BS 21.
These Valves start opening at the set pressure & open in
direct proportion to the increase, in order of set pressure.
These should be installed nearer to the pressure vessel they
protect. When installed, they should be one size smaller
than the pipeline size.

Operation:

Spring keeps the disc in parallel position and disc removes any dust or deposits from the bodyrings. Hence low torque is required to operate the valve. Rack and Pinion arrangement enablesto open / close in half turn.

Operation:

The steam trap works on the pressure difference, above and below the disc. Disc is raised from its seat dueto incoming pressure. High velocity of flashing condensate create low pressure beneath the disc, at the sametime pressure is build up in the chamber that force the disc on the seat. Now the condensates in the chamberdecrease the pressure and when it is lower than the inlet pressure, the disc lifts. This cycle repeats again and again.

Specification & Features:
Conforming To API 602 BS EN - 15761
Screwed female ends to NPT / Socket Welded Ends To ANSI B 16.11
Bolted bonnet, outside screw, yoke type, rising steam
Sturdy in design & superb in quality.
Handwheel operated.

3 Pcs Design (Reduced Bore)

Specification & Features:
Straight Pattern, Open Discharge,
Screwed Male Threads at Inlet to BS 21.
Angle Pattern, Enclosed Discharge, Screwed Male Threads
at Inlet and Screwed Female Ends at Outlet to BS 21.
These Valves start opening at the set pressure & open in
direct proportion to the increase, in order of set pressure.
These should be installed nearer to the pressure vessel they
protect. When installed, they should be one size smaller
than the pipeline size.

Operation:

Spring keeps the disc in parallel position and disc removes any dust or deposits from the bodyrings. Hence low torque is required to operate the valve. Rack and Pinion arrangement enablesto open / close in half turn.

Operation:

The steam trap works on the pressure difference, above and below the disc. Disc is raised from its seat dueto incoming pressure. High velocity of flashing condensate create low pressure beneath the disc, at the sametime pressure is build up in the chamber that force the disc on the seat. Now the condensates in the chamberdecrease the pressure and when it is lower than the inlet pressure, the disc lifts. This cycle repeats again and again.

Specification & Features:
Conforming To API 602 BS EN - 15761
Screwed female ends to NPT / Socket Welded Ends To ANSI B 16.11
Bolted bonnet, outside screw, yoke type, rising steam
Sturdy in design & superb in quality.
Handwheel operated.