HSS Toolbit is a non-rotary cutting tool used in metal lathes, shaper and planers. High Speed Steel (or HSS) is a subset of tool steels commonly used in Toolbits and cutting tools. Miranda Toolbits are made from M2, M35, M42 & T42 grades of HSS. HSS cobalt tool bits are used for general lathe work with increased wear resistance. Appication: Turing, Grooving, Facing, Slotting.

Solid carbide reamers are round cutting tools that enlarge the size of an existing hole, offering high quality of finish and straightness upon completion of the operation.

A ball nose end mill, also known as a spherical end mill or ball end mill, has a semi sphere at the tool end. There are two variant in Ball nose end one of them is Standard Ball Nose End Mill and another is Long Ball Nose End Mill. Ball nose end mills are used on work pieces with complex surfaces. Sizes are available from 3 mm to 25 mm in Standard and Long series ball nose end mill.

HSS Taper Shank Counterbore cutter with teeth on the periphery and the end, integral with a Morse Taper Shank, and having a detachable pilot. The cutter is intended for producing a flat seating for the accomodation of the head of a bolt set screw and is located by means of the pilot with relation to a center hole.

Combined drills and countersinks, commonly called center drills. They were originally designed to create the countersink required to locate a tailstock centre when turning between centres. A Centre Drill can also be used to provide a start location for a drill when drilling down the centre of a bar held in a Lathe chuck. Centre Drills are short and rigid enough to mark the bar centre without wandering off if they are carefully offered up to a rotating work-piece. It includes Type A, B and Series BS using varies Diameter, lengths.

HSS Side and Face Cutters are available in two type that is type 'A' and type 'B'. HSS Side and Face Cutter are profile sharpened cutters, having teeth on periphery and on both side. Used on horizontal milling M/C to mill slots, shoulders, small width surface etc. HSS side and Face Cutter available in various sizes eg. 50, 63, 80, 100, 125, 150, 160, 200, 225, 250 diameters.

Adrillis atoolfitted with acutting toolattachment or driving tool attachment, usually adrill bitordriver bit, used forboringholes in various materials orfasteningvarious materials together with the use of fasteners.

Needle Files are used for precision filling applications in die making and jewelry. this files are avialable in 12 diffrent shapes like Flat, Hand, Half Round, Round, Square, Triangular, Knife, Barrette, Crossing, Slitting & Ceochet with cut '0' & '2'.

Adrillis atoolfitted with acutting toolattachment or driving tool attachment, usually adrill bitordriver bit, used forboringholes in various materials orfasteningvarious materials together with the use of fasteners. The extra length of Extra Long Series Drills allows deep hole drilling in materials such as wood, plastic and metal.

ADrillis atoolfitted with acutting toolattachment or driving tool attachment, usually aDrill BitorDriver Bit, used forboringholes in various materials orfasteningvarious materials together with the use of fasteners. Long series drills are commonly called Aircraft length thanks to their extended lenght and original use in manufacturing riveted aluminum aircraft.

HSS Toolbit is a non-rotary cutting tool used in metal lathes, shaper and planers. High Speed Steel (or HSS) is a subset of tool steels commonly used in Toolbits and cutting tools. Miranda Toolbits are made from M2, M35, M42 & T42 grades of HSS. HSS cobalt tool bits are used for general lathe work with increased wear resistance. Appication: Turing, Grooving, Facing, Slotting.

Solid carbide reamers are round cutting tools that enlarge the size of an existing hole, offering high quality of finish and straightness upon completion of the operation.

A ball nose end mill, also known as a spherical end mill or ball end mill, has a semi sphere at the tool end. There are two variant in Ball nose end one of them is Standard Ball Nose End Mill and another is Long Ball Nose End Mill. Ball nose end mills are used on work pieces with complex surfaces. Sizes are available from 3 mm to 25 mm in Standard and Long series ball nose end mill.

HSS Taper Shank Counterbore cutter with teeth on the periphery and the end, integral with a Morse Taper Shank, and having a detachable pilot. The cutter is intended for producing a flat seating for the accomodation of the head of a bolt set screw and is located by means of the pilot with relation to a center hole.

Combined drills and countersinks, commonly called center drills. They were originally designed to create the countersink required to locate a tailstock centre when turning between centres. A Centre Drill can also be used to provide a start location for a drill when drilling down the centre of a bar held in a Lathe chuck. Centre Drills are short and rigid enough to mark the bar centre without wandering off if they are carefully offered up to a rotating work-piece. It includes Type A, B and Series BS using varies Diameter, lengths.

HSS Side and Face Cutters are available in two type that is type 'A' and type 'B'. HSS Side and Face Cutter are profile sharpened cutters, having teeth on periphery and on both side. Used on horizontal milling M/C to mill slots, shoulders, small width surface etc. HSS side and Face Cutter available in various sizes eg. 50, 63, 80, 100, 125, 150, 160, 200, 225, 250 diameters.

Adrillis atoolfitted with acutting toolattachment or driving tool attachment, usually adrill bitordriver bit, used forboringholes in various materials orfasteningvarious materials together with the use of fasteners.

Needle Files are used for precision filling applications in die making and jewelry. this files are avialable in 12 diffrent shapes like Flat, Hand, Half Round, Round, Square, Triangular, Knife, Barrette, Crossing, Slitting & Ceochet with cut '0' & '2'.

Adrillis atoolfitted with acutting toolattachment or driving tool attachment, usually adrill bitordriver bit, used forboringholes in various materials orfasteningvarious materials together with the use of fasteners. The extra length of Extra Long Series Drills allows deep hole drilling in materials such as wood, plastic and metal.

ADrillis atoolfitted with acutting toolattachment or driving tool attachment, usually aDrill BitorDriver Bit, used forboringholes in various materials orfasteningvarious materials together with the use of fasteners. Long series drills are commonly called Aircraft length thanks to their extended lenght and original use in manufacturing riveted aluminum aircraft.