Our Products
Earthmoving Equipment & Machines
2 Products availableWheelbarrow
2 Products availableTractor Grader
1 Products availableOur offered Product range includes Telescopic Tractor Attachment Unloader and Telescopic Radial Tractor Attachment Unloader.
Graph
Specifications
mm(feet_inches) | |
Normal reach at ground | 3441 (11' 3.5") |
Telescopic reach at ground | 4695 (15' 5") |
Reach at 50° dump | 1043 (3.5") |
Roll back angle | 25° |
Dump angle | 50° |
Normal dump height | 4030 (14' 2") |
Normal loader over height | 5022 (16' 5") |
Loader hinge pin height at normal | 5098 (16.5' 3") |
Extended dump height | 5778 (18.5' 6") |
Extended loader over height | 6450 (21' 2") |
Loader hinge pin height at extended | 6525 (21' 5") |
Fork maximum opening | 1182 (3.5' 5") |
Salient Features :
Transmission
Axles
Breaks
Steering
Electricals
Tyres
Hydraulics
CAB
Bucket Option
Graph
Excavator Performance
Standard | Extension (Option) | ||||
---|---|---|---|---|---|
meter | ft -inch | meter | ft -inch | ||
Standard Bucket Capacity | 0.27 cu.m (standard) | ||||
A | Maximum DIG Depth | 4.6m | 15ft-1in | 5.60m | 18ft-4in |
B | Reach Ground Level to Rear wheel center | 6.81m | 22ft - 4in | 7.91m | 25ft-11in |
C | Reach Ground Level to slew center | 5.5 m | 18 ft | 6.60m | 21ft-7in |
D | Reach at full Height to slew center | 2.85m | 9ft - 3in | 3.56m | 11ft-8in |
F | Maximum working Height | 5.92m | 19ft - 5in | 6.77m | 22ft-2in |
G | Maximum Load over Height | 4.14 m | 13ft - 6in | 5.02m | 16ft-5in |
H | Bucket Rotation - Power | 1880 degree | |||
Bucket Tear out Force | 6072 kgf | ||||
Dipper Tear our Force | 3150 kgf | ||||
Lift capacity to bucket Pivot at full Reach (without Bucket) |
1400 kgs |
Loader Performance
With Link Bracket | Without Link Bracket | ||||
---|---|---|---|---|---|
meter | ft -inch | meter | ft -inch | ||
Standard Bucket Capacity | 1.1 cu.m G.P Showel | ||||
I | Dump Height | 2.93 m | 9ft-7.3in | 2.96 m | 9ft-8.5in |
J | Load Over Height | 3.39 m | 11ft-1.4in | 3.39 m | 11ft-1.4in |
K | Pin Height | 3.61 m | 11ft-10in | 3.61 m | 11ft-10in |
L | Pin Forward Reach | 0.42 m | 1ft-4.5in | 0.42 m | 1ft-4.5in |
M | Reach at Ground | 1.60 m | 5ft-2.9in | 1.47 m | 4ft - 9.87in |
N | Reach at full height | 1.42 m | 4ft-7.9in | 1.28 m | 4ft-2.3 in |
O | Reach at full Height bkt Dumped | 1.1 m | 3ft-7.3in | 0.89 m | 2ft-11in |
P | Below ground level DIG Depth | 0.08 m | 3 in | 0.1 m | 3.9 in |
Q | Roll back at Ground | 500 degree | 490 degree | ||
R | Dump Angle | 450 degree | 450 degree | ||
Bucket Break-out Force | 8183 kgf | ||||
Loader Arm Break-out Force | 5251 kgf | ||||
Pay Load | 1800 kgf |
Static Dimensions
in (m) | in (ft-inch) | ||
---|---|---|---|
A | Over all lenth | 6.04 m | 19 ft - 9.82 in |
B | Wheelbase | 2.22 m | 7 ft - 3.39 in |
C | King post travel | 1.03 m | 3 ft - 4.5 in |
D | Minimum ground clearance | 0.48 m | 1ft - 6.81in |
E | Slew ground clearance | 0.65 m | 2ft - 1.6in |
F | Height to top of bonnet | 1.99 m | 6 ft - 6.34 in |
G | Height to top of cabin | 3.00 m | 9 ft - 10.46 in |
H | Over all height | 3.71 m | 12 ft - 2.1 in |
J | Track width - rear | 1.70 m | 5ft - 6.92in |
K | Track width - front | 1.93 m | 6 ft - 3.98 in |
L | Width over bucket | 2.35 m | 7 ft - 8.5 in |
M | Side reach to center line of machine | 6.08 m | 19 ft - 10 in |
Other Specifications
Engine | ||
Engine | Kirloskar 4R 1040, TC EURO-III Diesel Engine. | |
No of cylinder: | 4 | |
Gross Power: | 56.7 Kw (76HP) @ 2200 RPM. | |
Gross Torque | 300Nm @1500 RPM | |
Speed | ||
Forward Km/hr | Reverse Km/hr | |
Max: 41 Km/Hr | Max: 9 Km/Hr | |
Service Capacities | ||
System | Service | |
Hydraulic Tank | 120 Ltr | 100 Ltr |
Fuel Tank | 115/150 Ltr* | - |
Engine Coolant | 17 Ltr | 15 Ltr |
Engine Oil | 12 Ltr | 12 Ltr |
Transmission | 19.5 Ltr | 16 Ltr |
Rear axle | 17 Ltr | 17 Ltr |
4WD Front Axle | 8 Ltr | 8 Ltr |
Both are ideal for land development, excavation, digging, dozing and demolition. Both work well even on hard and tough soils. The machines have been proven and time tested. The machines are mounted at customer site and are compatible with 84 tractor models.
Salient Features
USP
Graph
Bucket Option
Specifications
STD V2 LOADER | EXT_HT_V2_LOADER | MAXX_V2_LOADER | ||
---|---|---|---|---|
LOADERS ( on 2 Wheel Drive Trs ) | mm(FEET_INCHES) | mm(FEET_INCHES) | mm(FEET_INCHES) | |
O | Loader Hinge Pin Height | 3350 (11') | 3700 (12' 13") | 3700 (12' 13") |
N | Load Over Height | 3100 (10' 2") | 3520 (11' 5") | 4350 (14' 3") |
M | Dump Height @45° | 2680 (8' 8") | 2988 (9' 8") | 2988 (9' 8") |
WITH OPTIONAL BOOSTER BUCKET(DUMP HEIGHT) | - | 4195 (13' 7") | 4195 (13' 7") | |
S | Reach At Full Height Fully Dumped | 700 (2'3") | 700 (2'3") | 700 (2'3") |
C | Working Depth | 150 (5") | 150 (5") | 150 (5") |
V | Dump Angle | 90° | 90° | 45° |
U | Roll Back At Ground | 60° | 60° | 60° |
Bucket Capacity | 0.6 cu.m. (900 kg) | 0.6 cu.m. (900 kg) | 0.6 cu.m. (900 kg) | |
Output (90% bucket cap & 40 sec opn cycle time)* | 48.6 cum/hr = 1700 cu.ft/hr |