Post Buy Requirement

Our Products

  1. Microscope

    1 Products available
  2. Polishing Machines

    1 Products available
  3. Hydraulic Press

    1 Products available
  4. Industrial Automation System

    1 Products available
  5. Gearbox & Gear Parts

    1 Products available
  6. Laboratory Equipments

    1 Products available
  7. Laboratory Apparatus

    1 Products available
  8. Others Products 3 Products available

Our Products

Our Complete range of products are PYROMATIC HOT MELT ADHESIVE BATH BSPIL-SPEQ-2000, Demonstration Gauge Sets and Bourdon Guage Trainer.

Pyromatic Hot Melt Adhesive Bath Bspil-speq-2000

We offer Pyromatic Hot Melt Adhesive Bath Bspil-speq-2000.Usage:- HOT MELT ADHESIVE BATHS CAN BE used by Dry Flower Manufacturers, Curio Producers, electronic components manufacturers and all others who use hot melt for adhesion purpose. Energy Saving: Due to High Quality Alloy Cast in Heating Element the Energy is used effectively Pollution Free : No Fumes unlike conventional heating without proper control of Temperature More Productivity: Due to pollution Free atmosphere where the workers will not inhale fumes in Production line, hence enhances Productivity No Sticky : High Grade of Teflon is used to avoid the stickiness No loss in Viscosity: No loss in Viscosity No material Degradation: Due to precise control of Temperature no Material Degradation High Aesthetic Value : Due to Non degradation of Hot Melt the Joineries will not be visible Almost ensuring Homogeneousness Capacity 1000ml,
View Complete Details

Demonstration Gauge Sets

We offer Demonstration Gauge Sets.Demonstration Gauge Sets - BSPIL-MTR-03013 a. Plain plug gauge dfb. Snap gauge sfc. Snap gauge dfd. Measuring pine. Key way width gaugef. Slip gaugeg. Taper plugh. Taper ringi. Plain ring gaugej. Adj. Snapk. Thread ringl. Plug gauges
View Complete Details

Bevel Gears

We are offering bevel gears- bspil-dyn-04009 bevel gears -motorized drive and rpm bspil-dyn-04009abevel gear box with housing bearing bspil-dyn-04009b(h) these are made from actual gears. A realistic shaft is provided to handle and operate and to transmit power to the driven gear through single follower. Assembly is mounted on wooden board and encapsulated with transparent perplex sheet for greater visibility and study.this system also comes with motor driven- model- bspil-dyn-04009(a).
View Complete Details

Thermal Conductivity Apparatus

We offer Thermal Conductivity Apparatus.Thermal Conductivity ApparatusBSPIL-HTR-09010 This apparatus consists of the test section assembly, consisting of the asbestos specimen, heater as well as thermocouples are available to measure temperatures on the specimens and there water inlet and outlet. Provision is also made to measure the cooling water flow rate. The whole assembly is enclosed in an insulating layer of mineral wool to prevent radiation and convective losses to the maximum extent possible
View Complete Details

Machine Vision System

We are offering machine vision system.This system helps the operatorstudents to see the machining progress with the help of digital camera and the personal computer and also analyze and measure the visualized component after storing the image. after visualizing the component the same can be measured very accurately with measurement system the various dimensions of the component such as length, width, perimeter, dia, angle etc., metrology imaging software digitaizing card wate ccd camera 4.6 laks pixel resolution lens adaptor camera power pack interface cable digitizer driver software
View Complete Details

Bourdon Guage Trainer

We offer Bourdon Guage Trainer.Bourdon Guage Trainer - BSPIL-IST-05020 This comprises of bourdon pressure gauge fitted on a pressure chamber, a displacement sensor is attached to the edge of the bourdon tube to sense the deflection of the bourdon tube due to pressure. The displacement indicator is provided to measure the deflection of the tube in terms of pressure and also in mm. Specification:Sensor : LVDT of 2.5mm fitted to the edge of bourdon tube.Master Gauge : Bourdon tube pressure gaugeDisplay : 3 digit to read pressure upto 30 PSI and displacement upto 2.5mmPressure Source : Foot pump to build pressure upto 30 PSI
View Complete Details

Pyromatic Binocular Microscope

A rigid and stable body fitted with binocular head ( assembled from imported prism) having inter papillary adjustments, quadruple nose-piece, built-up co-axial mechanical stage both sides graduated for slide manipulation, coarse motion device and highly sensitive fine focusing reading to .002mm incident bright field light through epi-illuminator with iris diaphragm and slot for dripping filter with 12 volt- 50 w halogen lamp imported from germany, control through solid state variable transformer. Up gradable to computerized imaging & microphotography.Bspil-met-01010a - non co-axial model for fine and coarse adjustments.Bspil-met-01010b- trinocularbspil-met-01010c- trinocular with micro photography attachment supplied with following optical combinations:-three achromatic objectives: m5x m 10 x and m4540x (sl)1. With indian optics 5 x 10 x 4540 x (s.l) & 2 eyepieces : h5x and w.f. 102 complete with all optics assembled from imported lenses having anti-reflection hard coating.3.complete with lieca usa optics fully importedoptional accessories : 20x eye piece, 100x objective, grain size eye piece, ocular micrometer eye piece, erma scale, filters, halogen bulb, power pack, digital color cam.
View Complete Details

Pyromatic Single And Double Disc Polishing Machine

Offers pyromatic single and double disc polishing machine - bspil-met-ind-01021. table top design with continuously variable speed. Fully moulded frp body with easy disc change design. Quick change disc design enables discs with different emery gritspolish cloths to be used in desired steps. Specifications 12hp high torque dc motor8" disc diameter standard10" disc diameter optionmany discs can be usedthyristor controlled speed controllerdigital speed indicator -50 to 1000 rpm.
View Complete Details

Pyromatic Hydraulic Specimen Mounting Press

Offers pyromatic pyromatic hydraulic specimen mounting press bspil-met-ind-01024. Hydraulic mounting press is designed for metallographic lab to mount the cut specimen. Features:easily interchangeable mould chamber of mould sizes 1", 1 14", 1 12" and2" dia. Comes with digital temperature cum indicator. Heating and cooling cycle, digital timer, pressure gauge, coolant block to quickly cool the mould chamber and produce the mounted specimen rapidly, design is ergonomic table top system to enchance the productivity of the lab personnel. High tonnage mounting press is also designed by us.
View Complete Details

Pyromatic Egg Incubator

Offers pyromatic egg incubator -bspil-bio-07013. It is used to hatch eggs in research worksit is like an ordinary incubator. Outer wall is painted inner wall is made of aluminum or stainless steel.The trays are also of perforated al or ss sheets carrying pvc egg trays.A mechanical device to tilt the trays front and back is provided so that the embryo of the egg is always in suspended position without touching the wall to ensure uniform all round growth.Working temp from 30* to 70* heating element kept on 2 sides. Fan circulates air inside the chambera water tray is kept at the bottom to increase humidity in the chamber approximately.Single door with glass panel is also provided. Capacity50 eggs100 eggs200 eggs.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Browse Our Products list of B.S.PYROMATIC INDIA (P) LTD. Chennai, Tamil Nadu
Post Buy Requirement

Our Products

  1. Microscope

    1 Products available
  2. Polishing Machines

    1 Products available
  3. Hydraulic Press

    1 Products available
  4. Industrial Automation System

    1 Products available
  5. Gearbox & Gear Parts

    1 Products available
  6. Laboratory Equipments

    1 Products available
  7. Laboratory Apparatus

    1 Products available
  8. Others Products 3 Products available

Our Products

We offer a complete product range of PYROMATIC HOT MELT ADHESIVE BATH BSPIL-SPEQ-2000, Demonstration Gauge Sets and Bourdon Guage Trainer

Pyromatic Hot Melt Adhesive Bath Bspil-speq-2000

We offer Pyromatic Hot Melt Adhesive Bath Bspil-speq-2000.Usage:- HOT MELT ADHESIVE BATHS CAN BE used by Dry Flower Manufacturers, Curio Producers, electronic components manufacturers and all others who use hot melt for adhesion purpose. Energy Saving: Due to High Quality Alloy Cast in Heating Element the Energy is used effectively Pollution Free : No Fumes unlike conventional heating without proper control of Temperature More Productivity: Due to pollution Free atmosphere where the workers will not inhale fumes in Production line, hence enhances Productivity No Sticky : High Grade of Teflon is used to avoid the stickiness No loss in Viscosity: No loss in Viscosity No material Degradation: Due to precise control of Temperature no Material Degradation High Aesthetic Value : Due to Non degradation of Hot Melt the Joineries will not be visible Almost ensuring Homogeneousness Capacity 1000ml,
View Complete Details

Demonstration Gauge Sets

We offer Demonstration Gauge Sets.Demonstration Gauge Sets - BSPIL-MTR-03013 a. Plain plug gauge dfb. Snap gauge sfc. Snap gauge dfd. Measuring pine. Key way width gaugef. Slip gaugeg. Taper plugh. Taper ringi. Plain ring gaugej. Adj. Snapk. Thread ringl. Plug gauges
View Complete Details

Bevel Gears

We are offering bevel gears- bspil-dyn-04009 bevel gears -motorized drive and rpm bspil-dyn-04009abevel gear box with housing bearing bspil-dyn-04009b(h) these are made from actual gears. A realistic shaft is provided to handle and operate and to transmit power to the driven gear through single follower. Assembly is mounted on wooden board and encapsulated with transparent perplex sheet for greater visibility and study.this system also comes with motor driven- model- bspil-dyn-04009(a).
View Complete Details

Thermal Conductivity Apparatus

We offer Thermal Conductivity Apparatus.Thermal Conductivity ApparatusBSPIL-HTR-09010 This apparatus consists of the test section assembly, consisting of the asbestos specimen, heater as well as thermocouples are available to measure temperatures on the specimens and there water inlet and outlet. Provision is also made to measure the cooling water flow rate. The whole assembly is enclosed in an insulating layer of mineral wool to prevent radiation and convective losses to the maximum extent possible
View Complete Details

Machine Vision System

We are offering machine vision system.This system helps the operatorstudents to see the machining progress with the help of digital camera and the personal computer and also analyze and measure the visualized component after storing the image. after visualizing the component the same can be measured very accurately with measurement system the various dimensions of the component such as length, width, perimeter, dia, angle etc., metrology imaging software digitaizing card wate ccd camera 4.6 laks pixel resolution lens adaptor camera power pack interface cable digitizer driver software
View Complete Details

Bourdon Guage Trainer

We offer Bourdon Guage Trainer.Bourdon Guage Trainer - BSPIL-IST-05020 This comprises of bourdon pressure gauge fitted on a pressure chamber, a displacement sensor is attached to the edge of the bourdon tube to sense the deflection of the bourdon tube due to pressure. The displacement indicator is provided to measure the deflection of the tube in terms of pressure and also in mm. Specification:Sensor : LVDT of 2.5mm fitted to the edge of bourdon tube.Master Gauge : Bourdon tube pressure gaugeDisplay : 3 digit to read pressure upto 30 PSI and displacement upto 2.5mmPressure Source : Foot pump to build pressure upto 30 PSI
View Complete Details

Pyromatic Binocular Microscope

A rigid and stable body fitted with binocular head ( assembled from imported prism) having inter papillary adjustments, quadruple nose-piece, built-up co-axial mechanical stage both sides graduated for slide manipulation, coarse motion device and highly sensitive fine focusing reading to .002mm incident bright field light through epi-illuminator with iris diaphragm and slot for dripping filter with 12 volt- 50 w halogen lamp imported from germany, control through solid state variable transformer. Up gradable to computerized imaging & microphotography.Bspil-met-01010a - non co-axial model for fine and coarse adjustments.Bspil-met-01010b- trinocularbspil-met-01010c- trinocular with micro photography attachment supplied with following optical combinations:-three achromatic objectives: m5x m 10 x and m4540x (sl)1. With indian optics 5 x 10 x 4540 x (s.l) & 2 eyepieces : h5x and w.f. 102 complete with all optics assembled from imported lenses having anti-reflection hard coating.3.complete with lieca usa optics fully importedoptional accessories : 20x eye piece, 100x objective, grain size eye piece, ocular micrometer eye piece, erma scale, filters, halogen bulb, power pack, digital color cam.
View Complete Details

Pyromatic Single And Double Disc Polishing Machine

Offers pyromatic single and double disc polishing machine - bspil-met-ind-01021. table top design with continuously variable speed. Fully moulded frp body with easy disc change design. Quick change disc design enables discs with different emery gritspolish cloths to be used in desired steps. Specifications 12hp high torque dc motor8" disc diameter standard10" disc diameter optionmany discs can be usedthyristor controlled speed controllerdigital speed indicator -50 to 1000 rpm.
View Complete Details

Pyromatic Hydraulic Specimen Mounting Press

Offers pyromatic pyromatic hydraulic specimen mounting press bspil-met-ind-01024. Hydraulic mounting press is designed for metallographic lab to mount the cut specimen. Features:easily interchangeable mould chamber of mould sizes 1", 1 14", 1 12" and2" dia. Comes with digital temperature cum indicator. Heating and cooling cycle, digital timer, pressure gauge, coolant block to quickly cool the mould chamber and produce the mounted specimen rapidly, design is ergonomic table top system to enchance the productivity of the lab personnel. High tonnage mounting press is also designed by us.
View Complete Details

Pyromatic Egg Incubator

Offers pyromatic egg incubator -bspil-bio-07013. It is used to hatch eggs in research worksit is like an ordinary incubator. Outer wall is painted inner wall is made of aluminum or stainless steel.The trays are also of perforated al or ss sheets carrying pvc egg trays.A mechanical device to tilt the trays front and back is provided so that the embryo of the egg is always in suspended position without touching the wall to ensure uniform all round growth.Working temp from 30* to 70* heating element kept on 2 sides. Fan circulates air inside the chambera water tray is kept at the bottom to increase humidity in the chamber approximately.Single door with glass panel is also provided. Capacity50 eggs100 eggs200 eggs.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us