B S Engineering Corporation

Shyam Bazaar, Kolkata, West Bengal

The dryer is 4 Section 3 deck Jet Ventilated 3.0 meters width Mat/Curtain Dryer-2750 mm in band width, 8 meters in drying length, 1.0 meter cooling section, 1.2 meter feeding side, 1.15 meter discharge side and 3400 MM in height. The dryer is fitted with propeller type high pressure dynamically balanced aluminium fans having jet nozzles for top and bottom of each deck throughout the length of the machine which is also equipped with latest type heating batteries & jet boxes. The machine is also perfectly insulated, its side covering being insulated with heat resisting insulated layer 100 mm thick all round rendering the same absolutely leak-proof so as to ensure optimum conservation and effective and uniform play of heat inside the machine as per design and complete with Dynodrive gear box, motors, and other necessary accessories.

Salient Features

Have Compact Drying Chambers, Cooling Section

Fitted with Dynamically Balanced Aluminum Alloy Axial Flow Propellers

Fixed guide-vanes are provided in front of the propellers to make the air flow parallel to the heating batteries.

Double row Jet Nozzles for Top & Bottom of each deck throughout the length of the dryer ensures uniform drying of Mats

Complete with Motors, Starters, Temperature Indicator, Chain and Gear Box.

Dynodrive (Infinitely Variable Speed Unit) can control the drying time from 3 - 40 minutes

The entire outside covering of the dryer is perfectly insulated with heat resisting insulated layer of 100 mm thick all round. Intermediate baffle sheets are provided to eliminate sliding of insulation materials due to vibration

These Machines are Energy Saving with Low Power consumption and High Rate of Production.

Less maintenance is required for this type of Dryers with no Jamming leading to lesser Downtime.

Conveyor Bands made out of quality materials, which ensure Rust proof and trouble free operations.

BS'Make, Hydraulically operated steam/oil heated multi daylight Hot Press in up-closing frame. The main body is fabricated from M.S. Plate and Hot Platens are also fabricated from solid plate as well as complete with Automatic Power-pack, steam connection pipes and other necessary parts and components.

• This Machine Mainly Use forTrimming the Four Rough Edges of All Kinds of Plywood / Boards.
• It hasFOUR Circular Saws Fitted with FOUR Motors.
• The Machine is Also Widely Used forTrimming the Four Edges of Block Board, Particle Board, MDF etc.Salient Features
  • The Board Carrying Table And Board Pusher Moves OnLinear Guide Rails. This Gives Parallel Cutting Accuracy Of The Boards.
  • Almost Continuous Operation (only 2 Unskilled workers in total operation) AsStackingOf Rough Boars Can Be Done On Pneumatic Supports Automatically ( With Out Unload Labour ) While Table Is Returning & Running Continuously with-out Hampering the cutting Process .
  • Laser Guided Cutting of Boards Helps Cutting Accuracy& Minimize Cutting Wastage.
  • PLC Fitted Control PanelGuides The TotalCutting ProcessAndFinished Board Stacking Automatically.
  • Cutting SawMotors Synchronized START/STOPE Save Power.

BS' Make, 1400 MM capacity Heavy duty Glue Spreader Machine having 2 nos. rubber Rollers and 2 Nos. Stainless Steel Doctor Rollers complete with 2 HP 1440 R.P.M. Motor and reduction gear. The machine has also got a stainless steel tray for excess glue collection.

Salient Features

The Machine is Exclusive of Control Panel

'BS' Make, Drying Chamber 11'-0" in height and Length 23-0" & Width 16-0 in working space equipped with powerful Cross Circulation Reversible axial flow fans. The chamber is complete with blower, heating batteries, necessary pipe connections, top damper, motors and bearings, special front small moisture vent out up & down sliding type Gate.

Salient Features

• 2 sets of double line finned type coils,
• 2 sets of single line finned type coil,
• 3 Nos. of reversible flow fans.
• 3 Nos. of Housing with Shaft complete
• 3 Nos. of Blower stands,
• 1 set of Partition Frame.
• 3 Nos. of Fan net guard,
• 3 Nos. of Top damper,
• 3 Nos. of 3 H.P. 960 RPM Motors
• Inspection Door
• Panel Board will cost extra at actual for single chamber & will be free of cost for double chamber
• 1 set of Necessary Pipelines inside the chamber.

Heavy Duty construction, High Speed, Hydraulic controlled Back-up Roller System, Pneumatic controlled Brake and Clutch System, Imported High Precision Screw System, Linear Guide ways system, Control Panel, Air Compressor, PLC with Variable Speed control with Manual Switch Drive System, All Motors (Main 56KW) and Necessary Accessories. Fully assembled on base platform. Ready to use.

Technical Details

Thrash Clipper for Waste Veneer Cutting, Veneer Transport

Conveyor (15Ft), Veneer Cutting System (25 & 50 Clip) and Output

Conveyor for Veneer Collection (10Ft).

Veneer Cutting Knife size 50 inches (1270 mm)

Maximum Log Diameter 600 mm dia.

Total Power needed is 75 HP

We are the main supplier of this product.

1.0 Ton Capacity Resin Kettle made out of Double jacketed design of sturdy Stainless Steel sheet of 5mm thickness for inner shell and Mild Steel 6mm thickness of outer shell. The machine is fitted with anchor type agitator. Complete with 1 No. 5.0 HP Motor and Gear Box, digital temperature indicator and electric panel box. The Machine has Horizontal Condenser (Shell & Tube type) Shell MOC-MS, Fluid-cooling water, reflux line and comes fitted with Charging and sampling points. MOC- MS & All contact parts are made of Stainless Steel. Maximum temperature to withstand-300oC, Maximum Pressure-3 kg/cm2. Heating medium-Steam. Cooling medium-cold water. 2Nos. vertical Storage Tanks of 16KL each. The tanks to be epoxy coated in the inside. Material of construction is Mild steel of 6mm(body) and 8mm(base) plates. Two pump for pumping chemical from tank to Resin Kettle. All necessary instrumentation to be supplied. NOTE: Platform and Stairs have to be built by client by civil construction as per our drawing

"BS"Make, Heavy duty Chain Feed cutting Machine suitable for cutting board up to 2440mm(L) x 1220mm(W) x 40 mm thick with a chain conveyor system on both sides of the machine with a provision for self pressing system from top and continuous cutting, one side of the saw will be fixed from the other side(right hand side) adjustable from 600mm to 2440mm according to the desired width complete with 2 Nos. 7.5 H.P. 2900 R.P.M. Motors for the purpose of cutting and 1 No. 5.0 H.P. 1440 R.P.M. Motor for driving the chain conveyor and 1 No. reduction gear box. Pre-cut saw system arrangement is available with 2 nos. 0.5HP motor. The pre-cut saw is an ideal attachment to prevent end chipping for finished boards. One set TCT saws included.

• Fibre Reinforced plastic Cooling tower is of Compact design and light weight.
• Metallic structure corrosion resistant hot dipped galvanized steel.
• Minimum maintenance and attractive looks
• The 'Bottle' type design is highly resistant against strong wind.
• Higher efficiency and minimum drift loss of water.
• The tower utilises corrosion proof high efficiency PVC fills.
• Water collection sump is leak proof to avoid any spillage, seepage of water.
• Total Power requirement 5HP.
• 200cbm per hour cooling capacity.
• Pump required 15Hp.

• This Machine Mainly Use forTrimming the Four Rough Edges of All Kinds of Plywood / Boards.
• It hasFOUR Circular SawFeatures
  • The Board Carrying Table And Board Pusher Moves On Linear Guide Rails. This Gives Parallel Cutting Accuracy Of The Boards.
  • Almost Continuous Operation (only 2 Unskilled workers in total operation) As Stacking Of Rough Boars Can Be Done On Pneumatic Supports While Table Is Returning.
  • Laser Guided Cutting of Boards Helps Cutting Accuracy& Minimize Cutting Wastage.
  • PLC Fitted Control PanelGuides The TotalCutting ProcessAndFinished Board Stacking Automatically.
  • Cutting SawMotors Synchronized START/STOPE Save Power.
  s Fitted with FOUR Motors.
• The Machine is Also Widely Used forTrimming the Four Edges of Block Board, Particle Board, MDF etc.

• Fibre Reinforced plastic Cooling tower is of Compact design and light weight.
• Metallic structure corrosion resistant hot dipped galvanized steel.
• Minimum maintenance and attractive looks
• The 'Bottle' type design is highly resistant against strong wind.
• Higher efficiency and minimum drift loss of water.
• The tower utilises corrosion proof high efficiency PVC fills.
• Water collection sump is leak proof to avoid any spillage, seepage of water.
• Total Power requirement 5HP.
• 200cbm per hour cooling capacity.
• Pump required 15Hp.