Features :

• Complete with foam tank, foam inductor, hose reel with nozzle
• Pedestal bearing ensures smooth rotating action
• 225 Liter foam tank
• Inline inductor 0 to 6% & Jet-Spray nozzle
• 1 ½” X 30 mtr high pressure rubber braided hose
• Waterways made from Stainless steel or Gunmetal
• Detachable rewinding handle
• Operating pressure: 145 PSI Max / 10 Bar
• 2 Flow rate: 95 GPM @ 100 PSI / 350 LPM @ 7 Kg/cm2

High pressure braided rubber hose as per IS 444 Type II / PVC / Thermoplastic as per IS 12585.

Features :

• UL Listed - USA and Canada
• Bearing IS 636:88 Type B mark
• Wheelmark approved
• Conforming to BS 6391 Type 3, EN 14540(2004)
• Smooth inner unified lining of specially formulated polymer, with very low friction loss
• Warp made of high tenacity fibres
• Weft made of multi-ply high tenacity fibres
• Synthetic rubber compound specially formulated for abrasion and chemical resistance, flexibility and protection against ageing
• Ribbed for hose protection and easy handling
• Standard colour: Reddish brown
• Options: Black, blue, yellow

Features :

• Special design for Navy and Coast Guard
• Corrosion resistant
• Straight stream to wide fog
• Ball valve for flow control
• Anti-slip pistol grip finger lock
• NFPA 1964 compliant

Features :

• Designed to quickly attach to bumper of nozzles
• Can be used with all types of foams
• Enhances the expansion of foam solution and delivers longer reach and heavier foam blanket

Features :

• Available in two sizes
• Available in two types of mounting
• Complete with hose rack assembly, 30 mtr hose, landing valve and nozzle
• Fixed or swinging

Features :

• Designed for high pressure application up to 580 PSI / 40 kg/cm
• Constant selectable gallonage nozzle with multiple flow setting
• Flow remains the same in all pattern
• Durable light hard anodized construction
• Straight stream to dense fog & flush without shut off
• Ball valve for flow control
• Unbreakable Stainless steel spinning teeth
• Anti-slip rubber moulded pistol grip
• Meets the need of forestry and municipal application where water conservation is desired
• NFPA 1964 compliant

Features :

• Special design gives low back pressure
• Light alloy hard anodized construction
• Straight stream to wide fog
• Pressure assisted flush without shut-off
• Acetal ball shut-off handle works smoothly at extreme ranges
• Wide fog for operator protection
• Anti-slip pistol grip finger lock
• NFPA 1964 compliant

Features :

• Special design gives low back pressure
• Light alloy hard anodized construction
• Straight stream to wide fog
• Pressure assisted flush without shut-off
• Acetal ball shut-off handle works smoothly at extreme ranges
• Wide fog for operator protection
• Anti-slip pistol grip finger lock
• NFPA 1964 compliant

Features :

• Lightweight & weatherproof
• Wall mounted / Self standing
• Finished with post office red colour or natural

Features :

• Bearing IS 636:88 Type A mark
• Wheelmark approved
• Conforming to BS 6391 Type 1, DIN 14811, UL 219, UL 19, EN 14540(2004)
• Jacket made of 100% polyester for extra strength
• Special quality black EPDM internal rubber lining withstands heat and polluted water
• Heat and abrasion resistant

Features :

• Wide range 500GPM, 750GPM, 1000GPM, 2000GPM, 4000 GPM
• Anti corrosive Stainless steel construction
• Excellent compatibility with AFFF foam
• 0 Fog angle up to 120
• 3% foam-proportioning nozzle
• 2 Designed for working pressure up to 10 kg/cm2

Features :

• Standpost mounted type
• 0 0 0 Horizontal 360 & vertical +90 & -45 rotation
• Hand-wheel for rotation of swivel joint
• Bronze geared swivel joint with self locking
• Can be used with jet nozzle or jet spray nozzle

Features :

• Standpost mounted type
• 0 0 0 Horizontal 360 & vertical +90 & -45 rotation
• Hand-wheel for rotation of swivel joint
• Available In S.S or Carbon steel
• Geared swivel joint with self locking
• 3% Or 6% Foam Induction
• Can be used with AFFF, ARFFF & Fluoro-protien foam compound
• Aqua-foam nozzle with S.S/ PVC pick up tube
• Flanged inlet 4”, 6” or 8”

Features :

• IS 8442
• Standpost mounted
• Carbon steel water ways
• Hot dip galvanised
• Bronze swivel joint with S.S ball bearings
• Flanged inlet
• 0 0 0 Horizontal 360 & vertical +80 & -45 rotation
• 2 Max. working pressure 150 PSI Max. / 10.5 Kg/cm
• Locking device for horizontal and vertical position
• Solid jet nozzle

Features :

• Complete with foam tank, foam inductor, hose reel with nozzle
• Pedestal bearing ensures smooth rotating action
• 225 Liter foam tank
• Inline inductor 0 to 6% & Jet-Spray nozzle
• 1 ½” X 30 mtr high pressure rubber braided hose
• Waterways made from Stainless steel or Gunmetal
• Detachable rewinding handle
• Operating pressure: 145 PSI Max / 10 Bar
• 2 Flow rate: 95 GPM @ 100 PSI / 350 LPM @ 7 Kg/cm2

High pressure braided rubber hose as per IS 444 Type II / PVC / Thermoplastic as per IS 12585.

Features :

• UL Listed - USA and Canada
• Bearing IS 636:88 Type B mark
• Wheelmark approved
• Conforming to BS 6391 Type 3, EN 14540(2004)
• Smooth inner unified lining of specially formulated polymer, with very low friction loss
• Warp made of high tenacity fibres
• Weft made of multi-ply high tenacity fibres
• Synthetic rubber compound specially formulated for abrasion and chemical resistance, flexibility and protection against ageing
• Ribbed for hose protection and easy handling
• Standard colour: Reddish brown
• Options: Black, blue, yellow

Features :

• Special design for Navy and Coast Guard
• Corrosion resistant
• Straight stream to wide fog
• Ball valve for flow control
• Anti-slip pistol grip finger lock
• NFPA 1964 compliant

Features :

• Designed to quickly attach to bumper of nozzles
• Can be used with all types of foams
• Enhances the expansion of foam solution and delivers longer reach and heavier foam blanket

Features :

• Available in two sizes
• Available in two types of mounting
• Complete with hose rack assembly, 30 mtr hose, landing valve and nozzle
• Fixed or swinging

Features :

• Designed for high pressure application up to 580 PSI / 40 kg/cm
• Constant selectable gallonage nozzle with multiple flow setting
• Flow remains the same in all pattern
• Durable light hard anodized construction
• Straight stream to dense fog & flush without shut off
• Ball valve for flow control
• Unbreakable Stainless steel spinning teeth
• Anti-slip rubber moulded pistol grip
• Meets the need of forestry and municipal application where water conservation is desired
• NFPA 1964 compliant

Features :

• Special design gives low back pressure
• Light alloy hard anodized construction
• Straight stream to wide fog
• Pressure assisted flush without shut-off
• Acetal ball shut-off handle works smoothly at extreme ranges
• Wide fog for operator protection
• Anti-slip pistol grip finger lock
• NFPA 1964 compliant

Features :

• Special design gives low back pressure
• Light alloy hard anodized construction
• Straight stream to wide fog
• Pressure assisted flush without shut-off
• Acetal ball shut-off handle works smoothly at extreme ranges
• Wide fog for operator protection
• Anti-slip pistol grip finger lock
• NFPA 1964 compliant

Features :

• Lightweight & weatherproof
• Wall mounted / Self standing
• Finished with post office red colour or natural

Features :

• Bearing IS 636:88 Type A mark
• Wheelmark approved
• Conforming to BS 6391 Type 1, DIN 14811, UL 219, UL 19, EN 14540(2004)
• Jacket made of 100% polyester for extra strength
• Special quality black EPDM internal rubber lining withstands heat and polluted water
• Heat and abrasion resistant

Features :

• Wide range 500GPM, 750GPM, 1000GPM, 2000GPM, 4000 GPM
• Anti corrosive Stainless steel construction
• Excellent compatibility with AFFF foam
• 0 Fog angle up to 120
• 3% foam-proportioning nozzle
• 2 Designed for working pressure up to 10 kg/cm2

Features :

• Standpost mounted type
• 0 0 0 Horizontal 360 & vertical +90 & -45 rotation
• Hand-wheel for rotation of swivel joint
• Bronze geared swivel joint with self locking
• Can be used with jet nozzle or jet spray nozzle

Features :

• Standpost mounted type
• 0 0 0 Horizontal 360 & vertical +90 & -45 rotation
• Hand-wheel for rotation of swivel joint
• Available In S.S or Carbon steel
• Geared swivel joint with self locking
• 3% Or 6% Foam Induction
• Can be used with AFFF, ARFFF & Fluoro-protien foam compound
• Aqua-foam nozzle with S.S/ PVC pick up tube
• Flanged inlet 4”, 6” or 8”

Features :

• IS 8442
• Standpost mounted
• Carbon steel water ways
• Hot dip galvanised
• Bronze swivel joint with S.S ball bearings
• Flanged inlet
• 0 0 0 Horizontal 360 & vertical +80 & -45 rotation
• 2 Max. working pressure 150 PSI Max. / 10.5 Kg/cm
• Locking device for horizontal and vertical position
• Solid jet nozzle