Bronco Buildsmart LLP

Sarkhej, Ahmedabad, Gujarat

BRONCO® DRAINCELL RD20 is a protective membrane for waterproofing and provides ventilation for concrete slabs which alleviates heat induced stress and cracking.

Area Of Application

• Construction of roof gardens
• Planter boxes
• Plaza decks
• Basements
• Pond filtration systems
• Pre-cast and in situ drains and sports fields

Advantages

• Design Flexibility
• Easy Installation
• Durable
• Efficient
• Environmental Friendly
• Light Weight and High Strength

BRONCO ® CEMSHIELD BA is a two component solvent free thixotropic epoxy resin bonding system for joining old concrete to new concrete and old concrete to old concrete.

Area Of Application

• Bond permanently freshly mixed concrete or mortar, glazed bricks, tiles, metal to metal, metal to glass, metal to concrete mortar steel or other structural material to old sound concrete.
• It is based on a 100% epoxy formulation and contains no solvents or water diluents.
• A time tested dimensionally stable compound, which has been extensively used all over India for structural bonding.

Advantages

• Provides a permanent bond
• Cures in both dry and damp conditions
• Thixotropic can be applied on vertical and overhead surfaces without sagging
• Bonding agent for mortars, renders, stone, steel, iron etc.
• Easy to mix and apply
• Excellent adhesion to most building material

BRONCO INSUL 50 extruded polystyrene is heavy duty thermal insulation rigid board is a high performance, energy conserving insulation material having proven track record.

Advantages

• Preferred thermal insulation material for Green Buildings.
• Can be used for different kind of areas in the building like roof, walls, and floors. It is also used for roofs with different shapes, size, and construction materials.
• Completely closed cell structure
• Resistant to moisture and water absorption
• High Thermal Resistance
• Highly Chemical Resistant
• Energy Saving
• Excellent shock absorption
• Excellent compressive strength
• Dimensionally stable
• Does not age and rot
• Fire Retardant
• Reusable and can be recycled
• Lightweight and durable
• Easy to cut handle and install
• Resistant to freeze thaw cycle

BRONCO ® CRACK SEAL is a crack sealing cementitious material in powder form.

Area Of Application

• Sealing cracks on plaster,
• Masonry and concrete substrates.

Advantages

• Single component – easy to use.
• Versatile – can be used for plaster, masonry or concrete, can be painted after application.
• Non sagging – can be used for horizontal, vertical and overhead applications.
• Good adhesion – effective bonding with substrate.
• Non Shrink – shrinkage cracking eliminated.

BRONCO® CEMKRETE LW + is a heavy duty damp proofing agent for concrete and rendering materials.

Area Of Application

• All structural concrete that is constantly or intermittently in contact with water such as sea walls, tunnels, basements, structural and pre-cast concrete in exposed superstructures.
• waterproofing cum plasticizing admixture for cement mortars and plasters.

Advantages

• Provides resistance to water penetration either under hydrostatic pressure or capillary absorption.
• Increased durability.
• Reduced sulphate attack.
• Reduced efflorescence.
• Improved cohesion, reduce segregation.
• Pumpabiity of concrete is greatly improved.
• Improved surface finish.
• Reduced shrinkage cracks in plasters
• Does not reduce compressive strengths
• Liquid – easy to use.
• Low dosage – Economical.

BRONCO® CEMCRYSTAL ADMIXTURE is crystalline waterproofing concrete Admixture.

Area Of Application

• Foundations
• Sewage traeatment plants
• Tunnels and subway systems
• Underground structures
• Dams
• Pre-cast structures
• Swimming pools and reservoirs
• Plastring of exterior walls
• Bridge decks, columns beams, etc.
• Roof and podium slabs

Advantages

• Mixed with concrete at the time of batching
• Self-healing characterstics
• Protects concrete exposed to harsh conditions
• An integeral system application
• Cost effective system and process friendly

BRONCO® CEMPU GROUT is Aqua-reactive PU Based Expanding Grouting Compound

Area Of Application

• It has versatile uses and it is normally considered to be the lastresort, when all conventional grouting methods to stop leakages have failed.
• It has successfully performed under certain most challenging conditions, where satisfied users have referred it as a magic product, to achieve almost impossible solutions.

Advantages

• It has very remarkable solidifying properties even in ground where water flow is violent. It stops water from oozing and solidifies the ground with high strength.
• It exerts successful solidifying property in all types of water, such as sea water, mineral water and those containing acid and alkali.
• It is extremely stable both chemically and physically and will not be damaged by any Bacterium.
• It is completely nonpollutant to the water it contacts and has no effect on potable water, fish or marine life.
• The coefficient of permeability of 10 -7 to 10 -8 mm /sec.
• Indicates the impermeability of soil solidified by BRONCO CEMPU GROUT. This also accounts for the excellent property of CEMPU GROUT in stopping water from oozing.
• It possesses excellent adhesiveness to soil particles and it is therefore also useful in landslide prevention.

BRONCO® CEMCON XL5451 is A versatile liquid compound for quick setting and rapid hardening of cement and concrete. It functions as a quick setting accelerator, allowing faster dismantling of shutters, thereby increasing the progress of work.

Area Of Application

• Extremely suitable for producing hard concrete in short time.
• Acts as an anti-freezing compound for frost free concrete.
• Helps faster de-shuttering.
• Ensures early strength gain.
• Very suitable for plugging leakages from weep holes, masonry joints.

Advantages

• It can be used successfully for faster dismantling of shutters and for early gain of strength.
• Normally 7 days strength is achieved in 3 days and 28 days strength in about 7 days.
• It is very suitable for big precast yards, fast concreting work in factories, workshops etc., where shutdown time is restricted.
• It facilitates concreting in cold weather conditions, eliminating the danger of frost and acts as an ant freezing agent also.
• It can be used for sealing joints in masonry or brick walls or cracks in
• buildings or industries, rocks, tunnels, through which there is water seepage.

BRONCO® RUSTKIL is fast acting, easy to use, rust and stain remover especially from iron and steel.

Area Of Application

• The formulation of BRONCO RUSTKIL is designed to remove rust and stains safely, quickly and effectively from corroded iron and steel prior to paint.
• It removes stains from marble and tiles and brings back its new shine.
• It is a good stain remover from domestic household appliances like basin, sink, taps, brass items etc.

Advantages

• Easy to use, simply follow the directions.
• Available in readytouse pack.
• Fast acting and efficient cleaning.
• Diluted BRONCO RUSTKIL is ecofriendly.
• BRONCO RUSTKIL promotes bonding of paints.
• Nonstaining to concrete.

BRONCO® BLOCK FIX is a ready to use grey cement based non-shrink, self- curing, water resistance mortar for fixing AAC blocks, Concrete blocks, fly ash bricks etc

Area Of Application

Fixing and jointing masonry units like AAC blocks, Concrete blocks, fly ash bricks etc.

Advantages

• Ready to use, only water to be added.
• Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
• Better bond than conventional cement based mortar.
• Faster to apply due to good spreadable properties.
• Excellent high strength & water retention properties.
• Economical as quantity of mortar is less than conventional mortar
• Self-curing.

BRONCO® BLOCK BOND is a ready to use grey cement based non-shrink, self- curing, water resistance mortar for fixing AAC blocks, Concrete blocks, fly ash bricks etc

Area Of Application

Fixing and jointing masonry units like AAC blocks, Concrete blocks, fly ash bricks etc.

Advantages

• Ready to use, only water to be added.
• Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
• Better bond than conventional cement based mortar.
• Faster to apply due to good spreadable properties.
• Excellent high strength & water retention properties.
• Economical as quantity of mortar is less than conventional mortar
• Self-curing.

BRONCO® CEMSHIELD BAND EXP is a high performance waterproofing tape based on functional thermoplastic elastomer for applications of sealing joints and cracks in areas exposed to high water pressure and therma movement.

Area Of Application

• Waterproofing of internal old and new joints of water tanks, reservoirs, swimming pools, etc.
• Sealing Joints of underwater concrete structures, large concrete decks, car parks, tunnels, roofs, podiums.
• Repairing and sealing of joints where structural movement is very high
• Ideal sealing tape where joints is wider than 40mm.

Advantages

• Excellent elasticity accommodates high structural movement
• Very good low temperature flexibility and high temperature stability
• Excellent weather and chemical including wide pH range resistance
• Does not rot.
• Resistance to root penetration.