OurSoldering & Desoldering Stationshave been designed with Latest technology according to your needs. We take utmost care in the production process according to standards are there which in turn reflects in their superior performance. The Desoldering Station leaves a perfect smooth surface that can be effectively soldered later. The Soldering Station in turn generates adequate heat so that the joints are merged without any fault.FEATURES

• Temperature Control for accurate and precise temperature

• Digital Dispaly for clear visibility with 7 segment display

• Auto tune systems control

• Closed loop temperature control

• Soft On/Off Power switch

• Modular and compact design

• Quality nozzles for long life

• High capacity through hole(PTH)De-soldering iron with finger activated vacuum

• Easy to handle. Different Sized Bits & Nozzles are available.

• Monitor Bit & Nozzle temperature intelligently with perfect temperature offset to ensure soldering Quality.

• Heatex 606SDSoldering Desolderng ceremic heater provides high insulation and reduces the handle-to-tip distance for faster soldering with a minimum of motion. The special alloy heating element is printed in the alumina ceramic insulating layer, then sintered to the ceramic main body, completely sealing the heating element from the air, protecting it from oxidation.

• A more advanced version of this uses a microprocessor to monitor theTemperature of the tip via thermocouple and adjusts the power to the heating element accordingly. The unit is digitally calibrated through advanced software.

• Burn Proof silicon cable thermal resistance up to 600 Deg.C

SYSTEMS INCLUDES

Microprocessor based power control unit with built in vacuum pump.

De-soldering iron & Soldering iron

Stand with cleaning sponge & Cellulose tip cleaning sponge

Power cord & Tool box: Fiber filters 20 Nos, solder collector glass tube 1No, Tip replace Spanner 1No, Cleaning

spring 2 Nos, Silicon washers 2 sets.

We are involved in the offering of high quality Digital Soldering Pot that come from premium quality raw materials laid out by our trusted vendors and suppliers. Our assortment has seen extremely high demand owing to its high quality output and reasonable pricing.

The HEATEX-601D Hot Plate with advanced PID intelligent temperature control heating technology and advanced temperature measurement technology, technical innovation makes more accurate temperature control

An oscilloscope is easily the most useful instrument available for testing circuits because it allows you toseethe signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately.

TheHEATEX845CR Multifunctional Rework stationwas developed to meet the present and future needs of the electronic industry, Service/R&D engineers and the hobbyist. The multi application ability of this station makes it ideal for use in situations where the maximum amount of flexibility is required. The station has an in built pump to provide the air movement for the hot air gun and the vacuum for the desoldering tool and can be used to rework both surface mounted and through hole components. The HEATEX 845CR control unit is the base a micro processor controlled system to regulate the solder processes.SYSTEMS INCLUDES:

• Power base with built in air pump & Microprocessor based power
• control channel with digital display
• Soldering iron
• De-soldering iron
• Hot Air gun
• SMD Tweezers
• Stands with cleaning sponge
• Power cord
• Vacuum Placer
• IC lifter
• Complete Tool Box , Replacement soldering & Desoldering
• Bits, Cleaning springs&sponges, Ex.

An oscilloscope is easily the most useful instrument available for testing circuits because it allows you toseethe signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately.

FEATURES:

OurSoldering & Desoldering Stationshave been designed with Latest technology according to your needs. We take utmost care in the production process according to standards are there which in turn reflects in their superior performance. The Desoldering Station leaves a perfect smooth surface that can be effectively soldered later. The Soldering Station in turn generates adequate heat so that the joints are merged without any fault.FEATURES

• Temperature Control for accurate and precise temperature

• Digital Dispaly for clear visibility with 7 segment display

• Auto tune systems control

• Closed loop temperature control

• Soft On/Off Power switch

• Modular and compact design

• Quality nozzles for long life

• High capacity through hole(PTH)De-soldering iron with finger activated vacuum

• Easy to handle. Different Sized Bits & Nozzles are available.

• Monitor Bit & Nozzle temperature intelligently with perfect temperature offset to ensure soldering Quality.

• Heatex 606SDSoldering Desolderng ceremic heater provides high insulation and reduces the handle-to-tip distance for faster soldering with a minimum of motion. The special alloy heating element is printed in the alumina ceramic insulating layer, then sintered to the ceramic main body, completely sealing the heating element from the air, protecting it from oxidation.

• A more advanced version of this uses a microprocessor to monitor theTemperature of the tip via thermocouple and adjusts the power to the heating element accordingly. The unit is digitally calibrated through advanced software.

• Burn Proof silicon cable thermal resistance up to 600 Deg.C

SYSTEMS INCLUDES

Microprocessor based power control unit with built in vacuum pump.

De-soldering iron & Soldering iron

Stand with cleaning sponge & Cellulose tip cleaning sponge

Power cord & Tool box: Fiber filters 20 Nos, solder collector glass tube 1No, Tip replace Spanner 1No, Cleaning

spring 2 Nos, Silicon washers 2 sets.

We are involved in the offering of high quality Digital Soldering Pot that come from premium quality raw materials laid out by our trusted vendors and suppliers. Our assortment has seen extremely high demand owing to its high quality output and reasonable pricing.

The HEATEX-601D Hot Plate with advanced PID intelligent temperature control heating technology and advanced temperature measurement technology, technical innovation makes more accurate temperature control

An oscilloscope is easily the most useful instrument available for testing circuits because it allows you toseethe signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately.

TheHEATEX845CR Multifunctional Rework stationwas developed to meet the present and future needs of the electronic industry, Service/R&D engineers and the hobbyist. The multi application ability of this station makes it ideal for use in situations where the maximum amount of flexibility is required. The station has an in built pump to provide the air movement for the hot air gun and the vacuum for the desoldering tool and can be used to rework both surface mounted and through hole components. The HEATEX 845CR control unit is the base a micro processor controlled system to regulate the solder processes.SYSTEMS INCLUDES:

• Power base with built in air pump & Microprocessor based power
• control channel with digital display
• Soldering iron
• De-soldering iron
• Hot Air gun
• SMD Tweezers
• Stands with cleaning sponge
• Power cord
• Vacuum Placer
• IC lifter
• Complete Tool Box , Replacement soldering & Desoldering
• Bits, Cleaning springs&sponges, Ex.

An oscilloscope is easily the most useful instrument available for testing circuits because it allows you toseethe signals at different points in the circuit. The best way of investigating an electronic system is to monitor signals at the input and output of each system block, checking that each block is operating as expected and is correctly linked to the next. With a little practice, you will be able to find and correct faults quickly and accurately.

FEATURES: