Brickvision Offers the Compression Testing Machine. This Compression Testing Machine is ahydraulic, electrically operated unit, designed for conducting compression tests on concrete specimens up to 20 cm. Diameter (or width and depth) and 30 cm in height and also rocks and various other materials. Cold Crushing Strength (CCS) test is also possible in this Compression Testing Machine. The Compression Testing Machine consists of a steel cross head and cast iron base with two pillars connecting the base and crosshead by means of nuts. The hydraulic jack of this Electric Compression Tester is fixed to the base. The upper platen has got a self-aligning action and is attached to a screw which passes through the crosshead and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin.

Loading is accomplished by the upward movement with the help of a centering pin. Loading of Compression Testing Machine is accomplished by the upward movement of the motorized pumping unit is of the plunger type and is connected to the jack by means of a steel connecting tube. A maximum read pointer is provided to facilitate the taking of the readings after the failure of specimens. The pressure gauges of 20 cm diameter with isolating valves are fixed on the pumping unit at an angle for easy readability. The Electric Compression Tester Machine is fitted with control which enables the rate of application of load to be varied. The Compression Testing Machine is equipped with facilities for hand operation as well.

The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the Compression Testing Machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of breakdown of power supply, the machine stops and will not restart unless the starting switch is operated.

Brick Vision Equipment are leading manufacturer, supplier of Compressive Strength Machine and our product is made up of good quality.
Invented to precision, the offered Compressive Strength Testing Machine is developed according to the international quality standards.
Apart from this, the mechanisms used in the manufacturing process are sourced from reliable vendors of the industry. Compressive Strength Testing Equipments are simple in operation, provide longer working life with high performance. These machines are provided in different models, capacities and specifications.

We manufacture best quality Fly Ash Machinery. Automatic Fly ash Machines are used for Making Fly ash bricks or Cement Bricks. Our Fly ash plants are available in Various Capacities and Sizes. These also Comes in Manual, Semi- Automatic, and Fully-Automatic Types.Our offered products are known for easy of installation, compact design, easy operation and long service life.We observe the progress in these activities and works for developing Fly ash brick Plant for ash usage. Fly Ash utilisation Cell will be set up at each station handles ash utilisation activities.
Our Fly Ash Bricks Plant and Fly Ash Concrete Block Plant is largely demanded because of its excellent quality and durability along with the fair price.

Main Equipments for dry mortar mixing machine

Features of simple Brickvision dry mix mortar production line:

I. Additionally equipped with secondary screw conveying system, finished product storage silo, automatic packing machine based on multi spiral ribbon mixer, to compose an efficient and reasonable simple dry powder mortar mixer with low cost.

II. Occupation Area

brickvision equipments pvt ltd offers complete turnkey plants for the manufacture of dry mixed mortars, plasters, repair mortars and tile glues. Brickvision is a reputed firm based in india, brickvision is amongst the leading firms in india and have worked with most of construction equipment manufacturing company.

total solutions from start to finish know-how:

our customers are offered the latest in manufacturing know-how and formulations. Every plant is specifically designed to make the project cost-effective and viable.

ex: plasters, tile adhesives, wall putty, skim coats, repair mortars, grouts, flooring, coatings, sealants, admixes, plasticizers for rmc, foamed concrete, etc.

raw material selection

services are provided for careful selection and analysis of locally available raw materials. By-products from an industry like fly ash, slag, stone dust, etc. Are incorporated into the offered formulations to make green building products. We also assist our customers in sourcing the lates1 additives from leading suppliers at special rates.

applications of dry mortar mixing plant

1. Bonding mortar: masonry mortar, wall, and floor tile adhesive mortar, anchorage mortar, etc.

2. Decoration mortar: decorative plaster, inner and outer wall putty, colorful decoration mortar, etc.

3. Protection mortar: water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildew proof mortar, shielding mortar, etc.

we are well known manufacturer of aac block jointing chemical plant in the market. Aac block joint chemical plant is specially manufactured to formulate mortar for joining blocks. Produced mortar is composed of a thick mixture of water, sand as well as cement as per set industry norms. Water is used to hydrate the cement and hold the mix together.
we offer excellent quality range of aac block jointing chemical plant. this aac block jointing chemical plants and dry mix mortar plants are highly demanded among our clients.

Brickvision Making Best Quality RMC Plant For Making Rmc. This series offers batching units in two capacities - 22 Cu.Mt./Hr and 30 Cu.Mt./Hr. These units are robustly designed and constructed to withstand any site conditions. Providing cross bins for the stationary units make them compact so they occupy less on-site space. The specifications mentioned below are for 22 and 30 Cu.Mt./Hr respectively.

Civil engineering testing equipment is used in the quality control processes associated with the analysis of soils, concrete, asphalt, bitumen, cement and mortar, steel, aggregates, and other materials used in civil engineering. Civil engineering projects largely depend on the quality of their materials; therefore testing equipment capable of providing consumers with accurate and repeatable results is imperative. While the mechanism in which the equipment performs analysis procedures varies depending upon the material to be analysed, these testing instruments are capable of analysing the hardness, moisture content,

permeability and other mechanical properties of the material of interest. We Brickvision Are Launching New Trading Business For Civil Lab Testing Machinery In Which We offer various types of Lab Equipment like a compressive testing machine and many more Equipment We are engaged in supplying a variety of civil engineering test equipment that finds usage in the construction & material testing industry. Our range encompasses equipment for testing of soil, cement, concrete, asphalt and other types of materials. Depending upon the clients requirement, we can execute custom orders & assure to deliver consignments as per committed time. CIVIL LAB equipment - Lab Testing Equipment, Civil Engineering Testing Equipment, Cement Testing Equipment, Aggregate Testing Equipment, Concrete Testing Equipment.

How To Work CTM?

5. Start applying the load at the specified pace rate, which could be maintained by adjusting the slow fast knob.

6. If the pace rate is on higher side the indicator displays red colour and the pace rate is on the lower side the indicator will display yellow colour.

7. If the pace rate is exactly equal to set rate then the indicator will display green colour.

8. As soon as sample fails, release the pressure slowly by opening valve.

9. The digital display will be holding the maximum load reading at which sample has failed. Note down the pattern of failure and calculate the compressive strength in N/mm2or kg/cm2.

Compression Testing Machine Hand Operated for Compression test on Concreteor similar materials. Suitable for use on Concrete Cubes of any size up to 150 X.

150 high Concrete Cylinders. The load is applied thru hydraulic assembly. The lower platen is on the Hydraulic ram, an upper having a spherical seating is adjustable. The machine is provided with an air release valve and the load is automatically indicated on the 15 cms dial, hydraulic pressure calibrated against an N.C.B.M. tested Proving Ring and fitted with a legless max pointer in addition to the live pointer.

Brickvision Offers the Compression Testing Machine. This Compression Testing Machine is ahydraulic, electrically operated unit, designed for conducting compression tests on concrete specimens up to 20 cm. Diameter (or width and depth) and 30 cm in height and also rocks and various other materials. Cold Crushing Strength (CCS) test is also possible in this Compression Testing Machine. The Compression Testing Machine consists of a steel cross head and cast iron base with two pillars connecting the base and crosshead by means of nuts. The hydraulic jack of this Electric Compression Tester is fixed to the base. The upper platen has got a self-aligning action and is attached to a screw which passes through the crosshead and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin.

Loading is accomplished by the upward movement with the help of a centering pin. Loading of Compression Testing Machine is accomplished by the upward movement of the motorized pumping unit is of the plunger type and is connected to the jack by means of a steel connecting tube. A maximum read pointer is provided to facilitate the taking of the readings after the failure of specimens. The pressure gauges of 20 cm diameter with isolating valves are fixed on the pumping unit at an angle for easy readability. The Electric Compression Tester Machine is fitted with control which enables the rate of application of load to be varied. The Compression Testing Machine is equipped with facilities for hand operation as well.

The electrical pumping unit is fitted with three micro switches one for each pressure gauge and will switch off the Compression Testing Machine automatically as the load on the machine approaches its full capacity of the gauge in case the isolating valves are not operated. This will protect the pressure gauges and the whole unit so that in case of breakdown of power supply, the machine stops and will not restart unless the starting switch is operated.

Brick Vision Equipment are leading manufacturer, supplier of Compressive Strength Machine and our product is made up of good quality.
Invented to precision, the offered Compressive Strength Testing Machine is developed according to the international quality standards.
Apart from this, the mechanisms used in the manufacturing process are sourced from reliable vendors of the industry. Compressive Strength Testing Equipments are simple in operation, provide longer working life with high performance. These machines are provided in different models, capacities and specifications.

We manufacture best quality Fly Ash Machinery. Automatic Fly ash Machines are used for Making Fly ash bricks or Cement Bricks. Our Fly ash plants are available in Various Capacities and Sizes. These also Comes in Manual, Semi- Automatic, and Fully-Automatic Types.Our offered products are known for easy of installation, compact design, easy operation and long service life.We observe the progress in these activities and works for developing Fly ash brick Plant for ash usage. Fly Ash utilisation Cell will be set up at each station handles ash utilisation activities.
Our Fly Ash Bricks Plant and Fly Ash Concrete Block Plant is largely demanded because of its excellent quality and durability along with the fair price.

Main Equipments for dry mortar mixing machine

Features of simple Brickvision dry mix mortar production line:

I. Additionally equipped with secondary screw conveying system, finished product storage silo, automatic packing machine based on multi spiral ribbon mixer, to compose an efficient and reasonable simple dry powder mortar mixer with low cost.

II. Occupation Area

brickvision equipments pvt ltd offers complete turnkey plants for the manufacture of dry mixed mortars, plasters, repair mortars and tile glues. Brickvision is a reputed firm based in india, brickvision is amongst the leading firms in india and have worked with most of construction equipment manufacturing company.

total solutions from start to finish know-how:

our customers are offered the latest in manufacturing know-how and formulations. Every plant is specifically designed to make the project cost-effective and viable.

ex: plasters, tile adhesives, wall putty, skim coats, repair mortars, grouts, flooring, coatings, sealants, admixes, plasticizers for rmc, foamed concrete, etc.

raw material selection

services are provided for careful selection and analysis of locally available raw materials. By-products from an industry like fly ash, slag, stone dust, etc. Are incorporated into the offered formulations to make green building products. We also assist our customers in sourcing the lates1 additives from leading suppliers at special rates.

applications of dry mortar mixing plant

1. Bonding mortar: masonry mortar, wall, and floor tile adhesive mortar, anchorage mortar, etc.

2. Decoration mortar: decorative plaster, inner and outer wall putty, colorful decoration mortar, etc.

3. Protection mortar: water-proof mortar, anti-corrosion mortar, self-leveling mortar, wear resistance mortar, thermal insulation mortar, sound insulation mortar, repair mortar, mildew proof mortar, shielding mortar, etc.

we are well known manufacturer of aac block jointing chemical plant in the market. Aac block joint chemical plant is specially manufactured to formulate mortar for joining blocks. Produced mortar is composed of a thick mixture of water, sand as well as cement as per set industry norms. Water is used to hydrate the cement and hold the mix together.
we offer excellent quality range of aac block jointing chemical plant. this aac block jointing chemical plants and dry mix mortar plants are highly demanded among our clients.

Brickvision Making Best Quality RMC Plant For Making Rmc. This series offers batching units in two capacities - 22 Cu.Mt./Hr and 30 Cu.Mt./Hr. These units are robustly designed and constructed to withstand any site conditions. Providing cross bins for the stationary units make them compact so they occupy less on-site space. The specifications mentioned below are for 22 and 30 Cu.Mt./Hr respectively.

Civil engineering testing equipment is used in the quality control processes associated with the analysis of soils, concrete, asphalt, bitumen, cement and mortar, steel, aggregates, and other materials used in civil engineering. Civil engineering projects largely depend on the quality of their materials; therefore testing equipment capable of providing consumers with accurate and repeatable results is imperative. While the mechanism in which the equipment performs analysis procedures varies depending upon the material to be analysed, these testing instruments are capable of analysing the hardness, moisture content,

permeability and other mechanical properties of the material of interest. We Brickvision Are Launching New Trading Business For Civil Lab Testing Machinery In Which We offer various types of Lab Equipment like a compressive testing machine and many more Equipment We are engaged in supplying a variety of civil engineering test equipment that finds usage in the construction & material testing industry. Our range encompasses equipment for testing of soil, cement, concrete, asphalt and other types of materials. Depending upon the clients requirement, we can execute custom orders & assure to deliver consignments as per committed time. CIVIL LAB equipment - Lab Testing Equipment, Civil Engineering Testing Equipment, Cement Testing Equipment, Aggregate Testing Equipment, Concrete Testing Equipment.

How To Work CTM?

5. Start applying the load at the specified pace rate, which could be maintained by adjusting the slow fast knob.

6. If the pace rate is on higher side the indicator displays red colour and the pace rate is on the lower side the indicator will display yellow colour.

7. If the pace rate is exactly equal to set rate then the indicator will display green colour.

8. As soon as sample fails, release the pressure slowly by opening valve.

9. The digital display will be holding the maximum load reading at which sample has failed. Note down the pattern of failure and calculate the compressive strength in N/mm2or kg/cm2.

Compression Testing Machine Hand Operated for Compression test on Concreteor similar materials. Suitable for use on Concrete Cubes of any size up to 150 X.

150 high Concrete Cylinders. The load is applied thru hydraulic assembly. The lower platen is on the Hydraulic ram, an upper having a spherical seating is adjustable. The machine is provided with an air release valve and the load is automatically indicated on the 15 cms dial, hydraulic pressure calibrated against an N.C.B.M. tested Proving Ring and fitted with a legless max pointer in addition to the live pointer.