Brass Electrical Components

Udyog Nagar, Jamnagar, Gujarat

• Heavy hex jam nuts are used to lock heavy hex nuts in place and prevent them from loosening. They are thinner than heavy hex nuts and outlast standard hex jam nuts in repetitive operations.
• Alloy steel is the strongest of all steel types. It has high tensile strength and offers excellent resistance to wear, fatigue and galling.

• Any Size available as per custom specification and requirements.

• Versatility and Ease of Installation.
• Extremely Strong and Permanent Fasteners.
• Corrosion Resistant and easy to shape.
• Flat bearing Surface.
• Provides excellent conductivity of heat and electricity.
• Available with semi-circular head, countersunk head, round head, semi hollow head and more as per custom specification.

• Used to create a corrosion resistant connection and reliable electrical contact.
• Used in construction and other industrial applications.
• Used for more light duty applications.
• Also Used in Structural application.

• Available in American National standard forms NPT ((ANSI/ASME B1.20.1-1983).
• Available in other thread forms: NPTF, NPSC, NPSM, BSPT, BSPP.

• Manufacturing facility is ISO 9001:2008.
• All fittings are made from CF8M (316) Stainless Steel material and conform to ISO 4144 standard.
• All threads are to ISO 7-1 (DIN2999) BSP Parallel Female, BSP Taper Male.
• Material certificates available on request.
• All fittings are manufactured by investment cast process, nipples produced from welded tube.
• All items are tested & inspected prior to dispatch.
• CE approved.
• Fittings meet applicable chemical & physical properties.

• Provide a means of closing off conduit fitting ports.
• Manufactured in stainless steel to help prevent corrosion.
• Can be installed using ordinary hand tools and require little maintenance or repair.
• Provided in a bright, polished finish that does not require touch up or painting.

Features:

• Forged steel plugs are solid, all others are cored.
• Designed to match rigorous quality standards.
• Through-the-tube plugging.
• No Pipe sheet damage and no leaks.

• Designed to Protect Threads from Dust, Dirt, and Moisture During Low-Pressure Testing and In-Plant Handling.
• Used for the smooth and protected appearance of the square tubes.
• For general hydraulic pressure. Applicable to schedule pipes.
• For low-pressure plumbing applications including air, water, natural gas, and steam.

• Any Size Available as per Custom Specification and Requirements.

• Also known as German Silver Parts.
• Offering an optimal compromise between cold forming and machining.
• High seawater corrosion resistance and anti-biofouling properties.
• Has excellent soldering, brazing, gas shielded arc welding, and butt weld fabrication properties.
• Nickel plating can increase the life of a connector as it prevents the formation of rust & can protect the connector from wear.
• A lightweight, low-cost alternative to stainless steel.
• Prevents rust from moisture and high humidity.

• Used in High corrosive environment.
• Used in liquid or gas equipment lines where rigorous control is required over the dimensional smoothing to guarantee constant flow rate.
• Used as a restrictor in the domestic/industrial refrigerators, air-conditioners and heat exchangers.
• Used in heat exchangers, refineries, power plants, desalination plants, ship building, condensers, distillers etc.
• Suitable for all types of food handling equipment requiring corrosion and wear-resistance.
• Used in diverse industrial applications.
• Ideal for applications requiring exceptional corrosion resistance and protection from wear & friction.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Brass Helical Knurled Inserts are compact inserts suitable for insertion in all types of plastics and can be used with hot plastic Moulding and cold plastic molding.
• It can be molded / plotted-in.
• Brass Helical Inserts are best suitable for electrical moulded box application.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• For Wood vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in wood.
• With sealing flange to limit insertion depth and tidy the pilot hole, and unthreaded external lead to aid installation.
• Screw-in threaded insert with blade-like self tapping external thread designed to reduce installation forces into harder materials.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Threads as per International Go & Not Go Standards.
• Deep Groove for maximum Pull Out Resistance.
• Inner Diameter (I/D) after Threads with very close tolerance to prevent unnecessary flush to enter into the inserts.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• Hex nuts are the most common type of nut. They have six uniform sides and are used in general-purpose fastening applications.
• Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Simple unheated installation procedure requires no special equipment.
• Brass Self Tapping Inserts for cold-set installation into soft plastics, wood, fiberboard and composites.
• Brass Self Tapping Inserts give high tensile strength, excellent resistance to corrosion and good electrical conductivity.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Brass Straight Knurled Inserts is One piece through-hole insert.
• It can be molded / plotted-in.
• A straight Knurl provides torque out capabilities.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• Slotted Hex nuts are the most common type of nut. They have six uniform sides with Slotted design and are used in general-purpose fastening applications.
• Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

• Press-fit insert with strong, reusable threads. No heat or ultrasonics required.
• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Mating screw expands the brass insert locking it in place.
• Eliminates the need for heat or ultrasonic.
• Easy mounting press inserts with slotted sides.
• Can be installed in thermoset or thermoplastic materials.
• Available with or without head and suitable for heated or cold press-in installation into plastics.
• Imperial thread sizes and studded versions also available.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• BSP/NPT Threaded Inserts give high tensile strength, excellent resistance to corrosion and good electrical conductivity.
• It can be molded / plotted-in.
• BSP / NPT Threaded Inserts are suitable for installation with wide range of Thermoplastics.
• Weather, moisture & chemical resistant.
• Cushions against abrasive contacts.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Brass Hexagonal Insert with blade-like self tapping external thread designed to reduce installation forces into harder materials.
• It can be molded / plotted-in.
• Brass Hexagonal Inserts give high tensile strength, excellent resistance to corrosion and good electrical conductivity.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• For Plastic vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in plastics.
• Brass Cross Knurled Inserts give high tensile strength, excellent resistance to corrosion and good electrical conductivity.
• It can be molded / plotted-in.
• Cross Knurled Inserts are suitable for installation with wide range of Thermoplastics.
• A Cross Knurl provides torque out capabilities.
• Use where high pull out resistance is required.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• Hex nuts are the most common type of nut. They have six uniform sides and are used in general-purpose fastening applications.
• Brass is an alloy of copper and zinc that is durable, nonmagnetic and conductive.

• Standard coupling nuts have internal threads on both ends that connect two male fasteners. They are commonly used to join threaded rod to create longer rod lengths.
• Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.

• For Wood and Plastics vary from communication equipment, the automotive industry, computer industry, and anywhere where strong durable threads are required in wood and plastics.
• Brass Tappex Type Inserts Brass Molding Inserts Brass Inserts Plastic Molding inserts are used with plastics and soft woods.
• They are available with serrated grooves and are push fit type.
• Available unheaded, headed and reverse headed.
• Imperial thread sizes and studded versions also available.

• Hex nuts are the most common type of nut. They have six uniform sides and are used in general-purpose fastening applications.
• Steel is strong and durable but less corrosion resistant than stainless steel. To improve its resistance to corrosion, it may receive additional finishes and coatings.