BRASS COMPONENTS INDIA

Udyog Nagar, Jamnagar, Gujarat

Brass Split Bolts Split Bolt Connectors Brass Line taps Copper Line Taps Split bolt connectors Available as per customer's specifications, High grade free cutting brassAny special brass material composition as per customers requirement.

Stainless Steel Parts Stainless Steel Components Stainless Steel Part SS Stainless Steel Component 304 316 SS Fitting 304 Fitting 316 Fitting Stainless Steel Part Component Stainless Steel Pipe Fittings Nipples Hose Barb SS Plugs Ferrule Nut Nipple Barrel Nipple Pipe NippleLock Nut Hose Fitting Pipe Tube Fitting SS 304 SS 316 Fitting Hose Barb Hose Tails Threaded Stainless Steel Fitting

Stainless Steel Parts Stainless Steel Components Material : SS AISI 304 SS 316 316L

SS Stainless Steel pipe fitting Nipples Hose Barb SS plugs Ferrule Nut Nipple Barrel nipple Pipe Nipple Lock nut Hose fitting Pipe Tube Fitting SS 304 SS 316 Fitting Hose Barb Hose Tail Threaded Stainless Steel Fitting

Stainless Steel Parts Stainless Steel Components Thread :

• ISO Metric (MM Thread)
• NPT Thread
• NPTF NPSM NPSF Thread threaded fitting
• UNC, UNF Thread
• Any threads as per custom design.

Stainless Steel Parts Stainless Steel Components Size :

• Specification or as per custom design or requirement.

Stainless Steel Parts Stainless Steel Components Finish And Coating :

• Natural and Electropolished

Stainless Steel Parts Stainless Steel Components Finish And Coating :

• Natural and Electropolished

A wide range ofPipe Sanitary Fittings Brass Pipe Fitting Stainless Steel pipe Fitting Stainless Steel Fitting Brass Fittings Pipe Fitting Brass Bathroom Fittings Stainless Steel Bathroom Fittings Brass Bronze Gun Plugs Elbows Crosses tee in different sizes and shapes. Each Brass Bronze Gun Metal Elbow Tee or Cross is checked for casting defect. Also available Brass Bronze gun Metal castings and casting cast parts fittings components accessory

Stainless Steel Parts Stainless Steel Components THREAD :- 1/8" , 1/4" , 3/8" , 1/2" , 3/4" 1" 11/4" 11/2" 2" 21/2 " 3" 4" BSP Parallel BSPT UNC NPT male female and left hand thread.

Stainless Steel Wire Products Wire Mesh Baskets SS Baskets Welded Wire Baskets Stainless Steel Baskets Manufacturers India SS Stainless Steel Wire Products Stainless Steel Wire Baskets SS Baskets Stainless Steel Baskets Welded Baskets SS Stainless steel Welding Baskets

Stainless Steel Baskets Introduction

Stainless Steel Baskets Welded Wire Fabrics are manufactured in Sheets or Rolls forms and are available in rectangular or square mesh opening.

Stainless Steel Baskets Material of Construction

Mild Steel, Bright Annealed Mild Steel, Galvanised Steel and Stainless Steel wires.

Stainless Steel Baskets Specifications

• Width: Available up to 2.5 meters width
• Wire Dia. : 0.5 mm to 2 mm for fine applications in Stainless Steel, Bright Annealed Mild Steel or Galvanised Steel
• 2 mm to 6 mm for heavy applications in Mild Steel or Galvanised Steel
• Spacing (Mesh Opening) : 5 mm x 5 mm to 50 mm x 50 mm opening for fine application 25 mm x 25 mm to 150 mm x 150 mm or 70 mm x 300 mm opening for heavy application
• Quality :- Welded Wire Fabrics comply with British and/or ASTM standard specifications.

Stainless Steel Baskets Applications

• Special application for glass reinforcement (wired glass) and brake linings
• As re-enforcement in cement concrete applications like underground cement pipes, sewerage, dams, roads etc.
• General purpose applications like fencing, window grills, partition, safety guards for machinery, poultry cages etc.

Brass male and female elbows (90* & 45*) are available in different threads and sizes as per customer specifications also available compression elbows and fittings.

Precision Brass Components Brass hydraulic Fittings Brass Pneumatic Fittings Airline Fittings Stainless Steel SS hydraulic Fittings Pneumatic Fittings Airline Fittings Brass hydraulic Fittings Brass Pneumatic Fittings Airline Fittings Stainless Steel SS hydraulic Fittings Pneumatic Fittings Airline Fittings

Brass Special Hose Hydraulic Pneumatic Fittings Accessories Elbows As Per User Specs

Brass Hydraulic and Pneumatic Fittings Accessories

Brass special hose connectors and hydraulic pneumatic fittings all made from 1/8"- to 4" in size in different threads and finishes.

brass eyelets 350# and 400# series durable brass eyelets in dignified designs, mainly for shoes, clothes and decoration, in a complete range of varieties and sizes. Mainly for shoes, clothes and decoration

Brass Cable Glands and Cable Accessories Brass Conduit Fittings and connectors for flexible conduits Electrical Accessories, Brass Split Bolts Line taps Cable Connectors, Brass Neutral Links Terminal Block Electrical Accessories.

Brass Concrete Anchors Corrosion resistant and hence can be used in all environments, Very useful in building material viz. concrete, brick, natural stone and also in wood, Brass Drop Anchor Brass Drop In Anchors.

Brass Pressed Parts Pressed Components Copper Pressed Parts Copper pressed Components Stainless Steel Pressed Parts Stainless Steel SS Pressed Components Brass Pressings press work Copper pressings Presswork Brass Copper Washers Stainless Steel S.S. Vulcanized Red Fiber Washers Brass Pressings Pressed Components Parts Washers

Plain washers to BS 4320: 1968 DIN 125, 433 and 9021.in Brass S.S. Copper Bronze Pressings pressed parts components presswork.

Also available special pressed parts pressings and deep drawn components for Switchgears, Transformers, Elevators, Heaters and other electromechanical applications.

Pressing and pressed parts up to 5mm thickness can be provided on 400 tones press. Auto pressed parts and Pressings for automotive use in stainless steel Brass shims pressed nuts Brass terminals auto parts available.

Material Brass, Copper, Stainless Steel (S.S.) (A2 / A4) and Vulcanized red fiber. Bronze

Finish Natural, Nickel, Electro-Tin etc.

Note Available Stainless Steel deep drawing facility for Cutlery and Utensils

Brass Material used for Brass Turned Parts Brass Washer Brass Components : CZ 115 c377, c380, cz122, en 12165 cw617n, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000, CDA 360 DZR Brass BS 2874 - CZ 131, CW 614 N, EN 12164 BS 2874.

Stainless Steel Vulcanized Red Fibre Washers Brass Copper Washers Stainless Steel S.S. Vulcanized Red Fibre Washers Stainless Steel Vulcanized Red Fibre Washers Brass Pressings Pressed Components Sheet Metal Parts Washer

Stainless Steel Vulcanized Red Fibre Washers Plain washers to BS 4320: 1968 DIN 125, 433 and 9021.in Brass S.S. Copper Bronze Pressings pressed parts components presswork Stainless Steel Vulcanized Red Fibre Washers Also available Stainless Steel Vulcanized Red Fibre Washers special pressed parts pressings and deep drawn components for Switchgears, Transformers, Elevators, Heaters and other electro mechanical applications. Stainless Steel Vulcanized Red Fibre Washers Pressing and pressed parts up to 5mm thickness can be provided on 400 tones press. Auto pressed parts and Pressings for automotive use in stainless steel Brass shims pressed nuts Brass terminals auto parts available.

Stainless Steel Vulcanized Red Fibre Washers Material Brass, Copper, Stainless Steel (S.S.) (A2 / A4) and Vulcanized red fibre Bronze

Stainless Steel Vulcanized Red Fibre Washers Finish Natural, Nickel, Electro-Tin etc.

Stainless Steel Vulcanized Red Fibre Washers Note Available Stainless Steel deep drawing facility for Cutlery and Utensils

Garden hose nozzle HOSE BARBS Brass Hose Barbs Nipples Nuts Tails Hose couplings Fittings Accessories for flexible hoses Brass Hose Barbs, Finish Natural Brass, Chrome plated or Nickel plated Also available Brass Nuts for Hose Line Connectors

Brass Garden hose Fittings garden hose barbs hose Stems Hose Nipples and S. S. stainless steel 304 316 hose fittings garden hose accessories nozzles Brass bibs cocks Brass hose inserts tails nozzle barb Brass hose connectors menders jointers couplings male hose barbs tails Garden Hose Fittings Brass Garden Hose Fittings GHT NH Fittings Stainless Steel Fittings Brass Garden Hose Fittings Garden Hose Accessories nipples swivel hose barbs nuts stems and nipples male female fittings and hose accessories components. Brass manifolds GHT threaded fittings hose couplers fire tube fittings Brass hose adapters couplings nuts bushes plugs nipple compression fittings for Nylon PVC hoses hose stems adaptors chrome Nickel plated Brass fittings lock nuts Threads: NPSM GHT MHT FHT NPSF NPTF BSP GAS ISO Metric BSPT NPT male and female fittings.

Stainless Steel Springs Pool Covers HardwareStainless Steel Springs Pool Covers Hardware Stainless Steel Springs Pool Cover Accessories Stainless Steel Springs Pool Covers Manufactures Stainless Steel Springs Pool Cover Anchors Stainless Steel Springs Pool Covers Springs Stainless Steel Springs Brass Anchors

Stainless Steel Springs Pool Covers Hardware Features

Specialists In Pool Cover Hardware Pool Cover Accessories Pool Cover Manufactures.Pool Cover Anchors Pool Cover Springs Stainless Steel Springs Brass Anchors Brass Slotted Anchors Brass Concrete Anchors Brass Anchors Fasteners Brass Screw Machine Parts Components.Brass Anchors Pool cover supplies stainless steel springs concrete anchors Brass wood deck Anchors S. S. spring Anchor Brass pool cover hardware supplies for pool covers and Swimming pool cover accessories.

Stainless Steel Springs Pool Covers Hardware Accessories Available Like-

Pool Cover Hardware Accessories For Pool Covers Manufacturers Stainless Steel Springs Pool Cover Anchors Brass Anchors Concrete Anchors Wood Deck Anchors Spring Anchors Stainless Steel 302 304 316 A2 A4 Buckles Aluminum Tamping Tool Vinyl Cover For Stainless Steel Springs Rubber Extrusion Trims Stainless Steel Hooks Aluminum End Tips Caps

Brass Lighting Components Turned Brass Parts for Lighting & Lamp Accessories, Lighting Brass Accessories and lamp holder accessories in different threads like Brass finials lock nuts rings , lamp holders , couplers , male female hooks connectors ceiling hook plate , bush , reducers , trumpet nipples , wood plate nipples , hexagon nuts , round nuts , rings , ring nuts , stepped ring nuts , bevel ring nuts , washers , brazing nuts, serrated lock washers , plain washers , 2 way balls , arm adaptor , knuckle joint Brass , swivel joints , male to female joint , ceiling plates clips curved tubing straight tubes , spacers , Allthread.

Stainless Steel Grids Sieves Strainers Stainless Steel Grids Stainless Steel Sieves Sieves Stainless Steel Strainers

Product Information

Stainless Steel Grids Sieves Strainers Stainless Steel Grids Stainless Steel Sieves Sieves Stainless Steel Strainers precision sieves can help ensure product quality in both laboratory and manufacturing applications. Electrical Brass Components sieves are used to sort, sift, screen and classify a variety of materials to determine particle size and shape.

The flat, smooth surface of the Stainless Steel Grids Sieves Strainers Stainless Steel Grids Stainless Steel Sieves Sieves Stainless Steel Strainers Electrical Brass Components sieve simplifies cleaning and minimizes clogging and particulate entrapment.

Stainless Steel Grids Sieves Strainers Stainless Steel Grids Stainless Steel Sieves Sieves Stainless Steel Strainers Electrical Brass Components sieves are precise instruments custom-produced from electroformed mesh material and assembled in a variety of standard diameter frames. The nickel Electrical Brass Components sieve features square apertures approximately .001 thick, with mesh sizes starting from 3 microns. The mesh can be supported by a nickel-plated copper/nickel support grid, and is supplied in stainless steel frames. The support grid is offered in 2.5 lines per inch, 5 lines per inch, and 14 lines per inch configurations. The Stainless Steel Grids Sieves Strainers Stainless Steel Grids Stainless Steel Sieves Sieves Stainless Steel Strainers stainless steel frames are offered in five standard sizes, including two metric sizes.

We Offer Bronze Castings Bronze Castings Gunmetal Casting Gunmetal Casting casting facility up to 40 kgs in weight and Bronze Casting up to 1meter in length. Our sand casting facility is well equipped to tackle any challenging Bronze Casting job or Bronze Bronze Castings Gun Metal Casting Bronze Castings enquiry

Bronze Castings Features

We can offer Bronze Castings Bronze Castings Gunmetal Casting Gunmetal Casting machined Casting casting cast parts.

Bronze CastingsMaterials

Bronze is 319 type or BS 249 type Any special Bronze Material Composition as per customers requirement Weights: from 10 Grams to 40 kgs

Bronze Castings Finished and Coatings

Natural, Nickel Plated, Tin Plated or any coating as per customer specification.

Any kind of special die casting sand gravity die lost wax shell moulding Casting and cast parts casting produced to user specifications. We can be more competitive than Chinese Casting and cast parts made in China Taiwan Asia Korea as traditional Indian expertise in Bronze Casting and Bronze casting is superior and Indian Bronze Gunmetal Bronze foundry / foundries are more competitive than other Bronze foundries

Bronze Castings Threads

Specification or as per custom design or requirement.

Metal Castings Metal Casting Pier Components manufactures powdered metal castings, parts, components, hardware kits, Metal Castings Metal Casting or assemblies for virtually any finished good. If you manufacture it, we can supply the components. If you want it manufactured, we can provide the entire assembly, packaged and ready for your customer.

Brass Stampings Copper Stampings Aluminium StampingsBrass Stampings Copper Stampings Aluminium Stampings Aluminium Copper Aluminium Stamping Forging Stampings Copper Forgings Aluminium Forgings Aluminum Stampings Brass Forgings Copper Stampings Brass Stampings

Brass Stampings Copper Stampings Aluminium StampingsFeatures

Brass Stampings Copper Stampings Aluminium Stampings Special Aluminium Stampings Forged Parts Stamped Parts Forged Components Parts Fittings Copper Forgings Brass Stamping Brass Forging We shall be pleased to develop Non-Standard Brass Stampings Copper Stampings Aluminium Stampings Brass Stampings Brass Forgings Brass Stamping Brass Forging Brass components nuts screws studs fixings wood screws machine screws fasteners as per specific requirements.

Brass Stampings Copper Stampings Aluminium StampingsMaterials

Copper Aluminium Alloys

Brass Stampings Copper Stampings Aluminium StampingsFinish And Coating

natural, Electro-Tinned, Nickel etc.

Brass grades used for Brass Stampings Copper Stampings Aluminium Stampings : CW 614n, cuzn36pb2, cuzn39pb3 & cuzn36pb3, EN 12164 BS 2874 - CZ 114 BS 2874, CZ 115 c345, C 353, CDA 36000, c3602, c3604, c385, cz131, cz124, cz121, en 12164.

Brass Forgings Copper Forgings Aluminium ForgingsAluminium Copper Aluminium Stamping Forging Stampings Copper Forgings Aluminium Forgings Aluminum Stampings Brass Forgings Copper Stampings Brass Stampings

Aluminium Copper Aluminium Stamping Forging Stampings Features

Special Aluminium Stampings Forged Parts Stamped Parts Forged Components Parts Fittings Copper Forgings Brass Stamping Brass Forging .

We shall be pleased to develop Non-Standard Brass Stampings Brass Forgings Brass Stamping Brass Forging Brass components nuts screws studs fixings wood screws machine screws fasteners as per specific requirements.

Aluminium Copper Aluminium Stamping Forging StampingsMaterials

Copper Aluminium Alloys

Aluminium Copper Aluminium Stamping Forging Stampings Finish And Coating

natural, Electro-Tinned, Nickel etc.

Brass Material used for Brass Forgings Copper Forgings Aluminium Forgings : CZ 114 BS 2874 - CZ 115 c345, C 353, CDA 36000, c3602, c3604, c385, cz131, cz124, cz121, en 12164 - cw606n, CW 603n, CW 614n, cuzn36pb2, cuzn39pb3 & cuzn36pb3.

COPPER CASTINGS BRASS CASTINGS NON FERROUS METAL CASTINGS

We have COPPER CASTINGS BRASS CASTINGS NON FERROUS METAL CASTINGS Brass Copper Foundry and can offer Brass Copper Cast parts machined castings at very good prices ! Kindly contact us with your specs for a quote on requirement for Brass Castings Copper Castings bronze Castings. We have die casting sand casting facility and our Brass Foundry Copper Foundry Bronze Foundry is well equipped to tackle Brass Castings Copper Castings Bronze castings up to 10 kilograms. We undertake custom Brass casting Copper castings Aluminium Bronze Castings Aluminum Bronze casting Beryllium Copper castings investment casting.

Filtration and melt treatment solutions include Glassware HT cups, glass fabric sprue tube filters, PAL rotary degassing/flux injection equipment, fluxes and additives. Hot topping compounds, boron nitride coatings, personal protection items and other consumable products are also available. Our products are designed to customer specifications to help reduce operating costs, improve quality, Investment casting, also known as the lost wax process, produces intricate shapes, requiring high accuracy. A range of melting products are available for investment casting that include energy efficient crucible furnaces, hand pouring ladles, skimmers and thermocouples. save energy and promote a safer environment.

BRASS COPPER CASTINGS BRASS COPPER CASTINGS NON FERROUS METAL CASTINGS CASTING FITTINGS CAST PARTS !

Brass Material Type used for COPPER CASTINGS BRASS CASTINGS NON FERROUS METAL CASTINGS : cuzn36pb2, cuzn39pb3 & cuzn36pb3, C 675, cz 114, cz 115, en 12165 CW 721 r, CDA 36000, c3602, c3604, c385, cz131, cz124, cz121, en 12164 - cw606n.

Investment Casting Investments Castings S.S. Lost Wax investment Casting Castings Stainless Steel machined Components turned Components Cast Parts Stainless Steel Forged Components S.S. Lost Wax investment Casting Castings facility up to 40 kg's in weight and Stainless Steel SS castings up to 1meter in length. Our sand casting facility is well equipped to tackle any challenging SS Casting job or Stainless Steel Parts castings enquiry.

Investment Casting Investments Castings Features

S.S. Lost Wax investment Casting Castings Stainless Steel machined Components turned Components Cast Parts Stainless Steel Forged Components S.S. Lost Wax investment Casting Castings Stainless Steel machined Components turned Components Cast Parts Stainless Steel Forged Components S.S. Lost Wax investment Casting Castings facility up to 40 kg's in weight and Stainless Steel SS castings up to 1meter in length. Our sand casting facility is well equipped to tackle any challenging SS Casting job or Stainless Steel Parts castings enquiry.

Investment Casting Investments CastingsMaterials

Stainless Steel Parts in SS 304 316 316L 202 Alloys Any special Stainless steel Parts Casting Material Composition as per customers requirement

Investment Casting Investments Castings Weight

From 10 Grams to 40 kg's We can offer Stainless Steel SS machined Parts castings casting cast parts

Size : Specification or as per custom design or requirement.

Investment Casting Investments Castings Finish And Coating

Specification or as per custom design or requirement. Natural, Nickel Plated, Electro Polished Plated or any coating as per customer specification. Any kind of special die casting sand gravity die lost wax shell moulding castings and cast parts casting produced to user specifications. We can be more competitive than Chinese castings and cast parts made in China Taiwan Asia Korea as traditional Indian expertise in Brass castings and Brass casting is superior and Indian Stainless Steel foundry / foundries are more competitive than other SS Stainless Steel foundries. We shall be pleased to develop Non-Standard Stainless Steel castings SS Stainless Steel Casting.

Brass S.S. stainless steel Hose Fittings Garden Hose Components Fittings Parts Accessories Hose Stems Brass S.S. stainless steel Hose Fittings Brass Garden Hose Components Fittings Parts Accessories Hose Stems garden Hose Accessories Brass Garden hose Barbs Fittings

Brass and S.S. stainless steel 304 316 hose fittings garden hose accessories nozzles Brass bibs cocks Brass hose inserts tails nozzle barb Brass hose connectors menders jointers couplings male hose barbs tails nipples Brass swivel hose barbs nuts stems and nipples male female fittings and hose Accessories Components. Brass manifolds GHT threaded fittings hose couplers fire tube fittings Brass hose adapters couplings nuts bushes plugs nipple compression fittings for Nylon PVC hoses hose stems adaptors chrome Nickel plated Brass fittings lock nuts

Threads: NPSM GHT MHT FHT NPSF NPTF BSP GAS ISO Metric BSPT NPT male and female fittings.

Brass Hose Fittings hose Barbs Nipples and Barbs for Rubber, PVC, Reinforced and Synthetic Hoses. Hose Tails and barbs are Machined to perfection and available in different forms with or without threads as per requirements. Brass Hose Barbs and hose nipples and fittings / accessories for flexible hoses are available in all the sizes from 1/8" - 3". Also available Garden hose Fittings Female hose couplings in Brass Bronze Gun metal Aluminium lugged nuts pins lugs type couplings nuts for fire hose available.

Sizes 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3"

Threads BSP (Gas), BSPT, NPT NPTF UNF and ISO Metric.

Finish Natural Brass, Chrome plated or Nickel plated

Also available Brass Nuts for Hose / Line Connectors

Brass Material used for Brass Garden Hose Accessories : CZ 114 BS 2874 - CZ 115 c345, C 353, CDA 36000, c3602, c3604, c385, cz131, cz124, cz121, en 12164 - cw606n, cuzn36pb2, cuzn39pb3 & cuzn36pb3, C 675, cz 114, cz 115, en 12165 CW 721 r.

Brass Components Brass Precision Components Brass Machined Components Brass Turned Components Screw machine parts Brass pressed Components

Brass Component Turned Brass Component to custom specification .

We offer Brass Component to user drawings and prints We specialize in machined Brass Component Brass Turned Component small big cast machined brass Component cast brass Component forged brass Component stamped brass Component from miniature 1mm to 200mm

Special Brass Component.

We shall be pleased to develop Non-Standard Brass Component nuts screws studs fixings wood screws machine screws fasteners as per specific requirements.

Materials :- Brass to BS 2874 / 2872

Finish Brass natural, Electro-Tinned, Nickel etc.

Threads ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.

Threads: 2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 11/8" 11/4" 11/2" 13/4" 2"

Brass Grades used for Brass Components Brass Precision Components : CZ 114 BS 2874 - CZ 115 c377, c380, cz122, CZ 121 Pb3 CZ 122 UNS C36000 CDA 360, Brass BS 2874 - CZ 131 CW 614 N, en 12165 cw617n, cw612n, cuzn40pb2.

Stainless Steel FastenersSS Stainless Steel 304 316 A2 A4 Fasteners Stainless Steel Fasteners

We offer high quality Stainless Steel Fasteners SS 304 SS 316 ScrewsFasteners Hexagon Head Fasteners SS 304 Fasteners SS 316 Fasteners Stainless Steel A2 Fasteners Stainless Steel A4 FastenersStainless Steel Fasteners

1.	Hexagon Full Nuts	18.	Threaded Studs
2.	Hex Head Bolts	19.	Tie Rods
3.	Hexagon Thin Nuts (Lock Nuts)	20.	Round / Hex Head Rivets
4.	Hexagon Socket Cap Screws	21.	Hex Head Screws
5.	Hex Socket Countersunk Screws	22.	U Bolts
6.	Grub Screws	23.	Nylon Insert Self Locking Nuts ( Nylock Nuts)
7.	Carriage Bolts	24.	Wing Nuts
8.	Slotted Cheese Head Machine Screws	25.	Square Nuts
9.	Slotted Pan Head Machine Screws	26.	Spring Washers
10.	Slotted Countersunk Head Machine Screws	27.	Plain Washers
11.	Slotted Raised Countersunk Head Machine Screws	28.	Slotted Set Screw
12.	Slotted Pan Tapping Screws	29.	Hexagon Slotted Nuts
13.	Slotted Raised / Countersunk Tapping Screws	30.	Coupler Nuts
14.	Cross Recessed Pan Head Tapping Screws	31.	Knurled Thumb Screws
15.	Cross Recessed CSK Tapping Screws	32.	Hexagon Castle Nuts
16.	Raised Head / Countersunk Head Wood Screws	33.	Long Nuts
17.	Countersunk Head / Slotted Round Wood Screws

Brass Sanitary Fittings Material

Brass & Stainless Steel

Brass Sanitary Fittings Type

Forged, Casted, Machined

Brass Sanitary Fittings Finish

With or Without Electro Chrome Plating.

Brass Sanitary Fittings Application

The full range of compression & flare fitting Brass Sanitary fittings are used for all types of Brass Pipes, Copper Pipes, Plastic Pipes, etc.

Brass Sanitary Fittings Range

• Brass Tee Brass Elbow Brass Union Brass Socket Brass Coupling , Brass Bush Brass Plug Brass Stop Plug Brass Adapters Brass Sanitary fittings couplers Male female pipe fittings

• Hexagonal Reducing Nipple, Hexagonal Stop Plug, Reducing Bush, etc.

• Male Female Adaptors, male Female Connectors, etc.

• Barb fitting for plastic pipe like Male Female Hose End, Hose Jointer, Tee, Elbow etc.

• Any other such item as per customer requirements.

Brass Material Type used for Brass Sanitary Fittings : BS 2874 - CZ 121 Pb3, CZ 122 UNS, C36000 CDA 360, DZR Brass BS 2874, CZ 131 CW 614 N, c380, cz122, en 12165 cw617n, cw612n, cuzn40pb2 & cuzn39pb2, CZ 114 BS 2874, EN 12164 BS 2874.

Brass Tower Bolts Door Stoppers Brass Door Bolts Hardware

Brass Tower BoltsDoor Stoppers Door Hardware are also having a lot of sizes and designs of which some have shown here.

From the photograph, top is 1/2" Tower Bolt, Second is also 1/2"Fancy Tower Bolt, third is Hex type 1/2" Tower Bolt and length can be varied up to 36" without any joint. Last product is called "Side latch" in which Both sides of Tower Bolt is removed and can be used in table or Drawer.

Brass Material Type used for Brass Tower Bolts Door Stoppers Brass Door Bolts Hardware : CZ 114 BS 2874, CZ 115 c377, c380, cz122, en 12165 cw617n, cw612n, cuzn40pb2, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360, Brass BS 2874 - CZ 131.

We Offers Various Brass Hose Stems Hose Accessories garden hose barbs hose Stems Hose Nipples and S. S. stainless steel 304 316 hose fittings garden hose accessories

Hose Stems Hose Accessories Features

Brass Hose Stems Hose Accessories garden hose barbs hose Stems Hose Nipples S. S. stainless steel 304 316 hose fittings garden hose accessories nozzles Brass bibs cocks Brass hose inserts tails nozzle barb.Brass hose connectors menders jointers couplings male hose barbs tails Hose Stems Hose Accessories Brass Hose Stems Hose Accessories GHT NH Fittings Stainless Steel Fittings Brass Hose Stems Hose Accessories Garden Hose Accessories nipples swivel hose barbs nuts stems and nipples male female fittings and hose accessories components. Brass manifolds GHT threaded fittings hose couplers fire tube fittings Brass hose adapters couplings nuts bushes plugs nipple compression fittings for Nylon PVC hoses hose stems adaptors chrome Nickel plated Brass fittings lock nuts Threads: NPSM GHT MHT FHT NPSF NPTF BSP GAS ISO Metric BSPT NPT male and female fittings.

Hose Stems Hose Accessories Material Used

Brass - BS 2872 CZ 112.

Hose Stems Hose Accessories Sizes

m4 m5 M6 M8 M10 M12 m14.

Hose Stems Hose Accessories Finish And Coating

Natural, Electro-Tin, Chrome or Nickel plated.

Brass Material Type used for Hose Stems Hose Accessories : EN 12164 BS 2874 - CZ 114 BS 2874, CZ 115 c377, c380, cz122, en 12165 cw617n, cw612n, cuzn40pb2 & cuzn39pb2, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874.

Brass grades used for BRASS ALDROPS : BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 - CZ 131 CW 614 N EN 12164 BS 2874 - CZ 114 BS 2874 - CZ 115 c377, c380, cz122, en 12165 cw617n, cw612n, cuzn40pb2 & cuzn39pb2.

Brass Castings Facility Up To 40 Kg's In Weight And Brass Castings Up To 1meter In Length. Our Sand Castings Facility Is Well Equipped To Tackle Any Challenging Brass Castings Job Or Brass CastingEnquiry.

Material Used

Brass or Copper Alloy Non ferrous alloys Bronze Copper Castings . Brass is 319 type or BS 249 type .Any special Brass Material Composition as per Customers Requirement .Brass to BS 2874 / 2872.Brass natural, Electro-Tinned, Nickel etc.

Brass Casting Weight

From 10 Grams to 40 kg's. We can offer Brass Machined Casting Brass Casting Machining Cast Parts Size : Specification or as per Custom Design or Requirement.

Finish And Coating

Natural, Nickel Plated, Tin Plated Or Any Coating As Per Customer Specification. Any Kind Of Special Die Castings Sand Gravity Die Lost Wax Shell Molding Castings And Cast Parts Castings Produced To User Specifications. We Can Be More Competitive Than Chinese Castings And Cast Parts Made In China Taiwan Asia Korea As Traditional Indian Expertise In Brass Castings And Brass Casting Is Superior And Indian Brass Foundry / Foundries Are More Competitive Than Other Brass Foundries. We shall be pleased to develop Non-Standard Brass casting Brass cast parts castings as per specific Requirements.

Brass Grades used for BRASS CASTINGS : BS 2874 - CZ 115 c377, EN 12164 BS 2874, en 12165 cw617n, c380, cz122, cw612n, cuzn40pb2 & cuzn39pb2, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360.

Brass locknuts are the traditional components used in fastening glands to the gland plate. Electro zinc plated Steel locknuts are a cheaper alternative and should be used only in dry, low humidity conditions. Lock nuts available in metric, imperial, NPT, BSPT, BSP and PG threads.

BRASS KNOBS BRASS DRAWER KNOBS BRASS DRAWER PULLS DOOR KNOBSBRASS CABINET KNOBS MANUFACTURER EXPORTER

We are having a large range of " Brass cabinet Knobs " with color and Gold Plated. Some of our designs are shown below:

Pipe Fittings Sanitarybathroom Plumbing FittingBrass Pipe Fittings Brass Copper Gun metal S.S. Pipe Fittings Plumbing bathroom Sanitary Fittings manufacturer supplier from India

A wide range of Brass Bronze Gun Plugs Elbows Crosses tees in different sizes and shapes. Each Brass Bronze Gun Metal Elbow Tee or Cross is checked for casting defects. Also available Brass Bronze gun Metal castings and casting cast parts fittings components accessories

Our products range of Brass Accessories include wiring accessories, conduit fittings, terminal blocks, parts, components and switch parts. We also manufacture Brass wiring Brass accessories as per customer specifications.

Our products range in brass accessories include following : Wiring Accessories Earthing Accessories HRC Fuse Connectors Insert For PVC Moulding Parts and Conduit Fittings Neutral Links and Terminal Blocks Switch Parts General Brass Accessories Panel Board Accessories Our Product Range of Brass Accessories in Earthing Equipment Include Following : Coupler Rod to Tape Clamp Test Clamp Oblong Test Clamp Square Tape Clamp DC Tape Clip Tee Clamp Rod to Tape Coupling Our Product Range in Brass Accessories Switch Parts include following : 5 Amp Two Pin Socket with Spring 5 Amp Two Pin Socket Heavy Type 5 X 5 Amp Universal Combine Socket 5 Amp Earthing Socket with Spring 10 Amp Live Part Socket 15 Amp Earthing Socket 5 X 15 Amp Universal Combine Socket 10 X 15 Amp Universal Combine Socket Moulding Inserts 6 Amp Riveting TC Piller 16 Amp Riveting TC Piller Riveting Piller 16 Amp Side Part 16 Amp Center Part 32 Amp Side Part 32 Amp Center Part 5 Amp Top Pin with Spring Ceiling Rose

Brass grades used for BRASS ACCESSORIES : BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 - CZ 131 CW 614 N EN 12164 BS 2874 - CZ 114 BS 2874 - CZ 115 c345, C 353, CDA 36000, c3602, c3604, c385, cz131, cz124, cz121, en 12164 - cw606n, CW 603n, CW 614n, cuzn36pb2, cuzn39pb3 & cuzn36pb3. C 675, cz 114, cz 115, en 12165 CW 721 r & CW 722r.

We Offer Brass Foundries Copper Foundries Casting Facility Up To 40 Kg's In Weight And Brass Foundries Copper Foundries Castings Up To 1meter In Length. Our Sand Casting Facility Is Well Equipped To Tackle Any Challenging Brass Foundries Copper Foundries Casting Job Or Brass Foundries Copper Foundries Castings Enquiry.

Material Used

Brass or Copper Alloy Non ferrous alloys Bronze Copper Casting .Brass is 319 type or BS 249 type .Any special Brass Material Composition as per Customers Requirement .Brass to BS 2874 / 2872.Brass natural, Electro-Tinned, Nickel etc.

Brass Foundries Copper Foundries Castings Weights

from 10 Grams to 40 kg's.

We can offer Brass Machined Casting Brass Foundries Copper Foundries Casting Machining Cast Parts

Size : Specification or as per Custom Design or Requirement.

Finish And Coating

Natural, Nickel Plated, Tin Plated Or Any Coating As Per Customer Specification. Any Kind Of Special Die Casting Sand Gravity Die Lost Wax Shell Molding Castings And Cast Parts Casting Produced To User Specifications. We Can Be More Competitive Than Chinese Castings And Cast Parts Made In China Taiwan Asia Korea As Traditional Indian Expertise In Brass Foundries Copper Foundries Castings And Brass Foundries Copper Foundries Casting Is Superior And Indian Brass Foundry / Foundries Are More Competitive Than Other Brass Foundries.

We shall be pleased to develop Non-Standard Brass Foundries Copper Foundries Casting Brass cast parts castings as per specific requirements.

Brass Battery Terminals are available in many different designs but in general there are only main three types which are - LUCAS , ANGLE & STRIP.

In which Lucas is available in three sizes, 9.5mm, 11mm & 13mm. Top three figures are of Lucas type.

We have also developed some special designs made by "FORGING" on the demand of our customer.

Our technocrats are capable to design any type of Terminals through Forging or any other process, though it is too difficult.

Sheet Metal Parts Sheet Metal Components Sheet Metal Work

Sheet Metal Parts Sheet Metal Components Sheet Metal Work Sheet Metal Components Sheet Metal Parts Sheet Metal Work Press Work Brass Sheet Metal Parts Copper Sheet Metal Parts Stainless Steel Sheet Metal Parts Brass Sheet Metal Components

Sheet Metal Parts Sheet Metal Components Sheet Metal Work Features

Plain Brass Copper washers to BS 4320: 1968 DIN 125, 433 and 9021. Also available special pressed parts pressings and deep drawn components , pressings and parts for Switchgears, Transformers, Elevators, Heaters and other electromechanical applications. Pressing up to 5mm thickness can be provided on 400 tones press.

Sheet Metal Parts Sheet Metal Components Sheet Metal Work Materials

Brass Copper Stainless Steel Pressed Parts Pressings press Work

Brass Material Type used for Sheet Metal Parts Sheet Metal Components Sheet Metal Work : CZ 114 BS 2874 - CZ 115 c377, c380, cz122, en 12165 cw617n, cw612n, cuzn40pb2 & cuzn39pb2, S 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 - CZ 131.

We Offer Non Ferrous FoundriesFacility Up To 40 Kg's In Weight And Non Ferrous Foundries s Up To 1meter In Length. Our Sand Casting Facility Is Well Equipped To Tackle Any Challenging Non Ferrous Foundries Job Or Non Ferrous Foundries s Enquiry.

Brass Foundries Non Ferrous Foundries Material Used

Brass or Copper Alloy Non ferrous alloys Bronze Copper Casting .Brass is 319 type or BS 249 type .Any special Brass Material Composition as per Customers Requirement .Brass to BS 2874 / 2872.Brass natural, Electro-Tinned, Nickel etc.

Brass Foundries Non Ferrous Foundries Weights

from 10 Grams to 40 kg's.

We can offer Brass Machined Casting Non Ferrous Foundries Machining Cast Parts

Size : Specification or as per Custom Design or Requirement.

Brass Foundries Non Ferrous Foundries Finish And Coating

Natural, Nickel Plated, Tin Plated Or Any Coating As Per Customer Specification. Any Kind Of Special Die Casting Sand Gravity Die Lost Wax Shell Molding Casting And Cast Parts Casting Produced To User Specifications. We Can Be More Competitive Than Chinese Casting And Cast Parts Made In China Taiwan Asia Korea As Traditional Indian Expertise In Non Ferrous Foundries s And Non Ferrous Foundries Is Superior And Indian Brass Foundry / Foundries Are More Competitive Than Other Brass Foundries.

We shall be pleased to develop Non-Standard Copper Casting Brass cast parts Casting as per specific requirements.

Brass Material used for Brass Foundries Non Ferrous Foundries : C 675, cz 114, cz 115, EN 12164 BS 2874 - CZ 114 BS 2874, CZ 115 c345, C 353, CDA 36000, c3602, c3604, c385, cz131, cz124, cz12, en 12164 - cw606n, CW 603n1, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 - CZ 131.

We Offer Brass Hose Nipples Brass Hose Barbs Nipples Nuts Tails Hose couplings Fittings Accessories for flexible hoses Brass Hose Barbs Hose Coupling

Hose Barbs Hose Tails Brass Hose Fittings Hose Stems Nipples Features Brass Hose Nipples Brass Hose Fittings hose Barbs Nipples and Barbs for Rubber, PVC, Reinforced and Synthetic Hoses. Hose Tails and barbs are Machined to perfection and available in different forms with or without threads as per requirements. Brass Hose Barbs and hose nipples and fittings / accessories for flexible hoses are available in all the sizes from 1/8" - 3". Also available Garden hose Fittings Female hose couplings in Brass Bronze Gun metal Aluminium lugged nuts pins lugs type couplings nuts for fire hose available. Brass Hose Nipples Sizes 1/8" 1/4" 3/8" 1/2" 3/4" 1" 11/4" 11/2" 2" 21/2" 3" Brass Hose Nipples Threads BSP (Gas), BSPT, NPT NPTF UNF and ISO Metric. Brass Hose Nipples Finish Natural Brass, Chrome plated or Nickel plated Also available Brass Nuts for Hose / Line Connectors

Brass grades used for Brass Hose Nipples : CZ 114 BS 2874 - CZ 115 c345, C 353, CDA 36000, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR, Brass BS 2874 - CZ 131 CW 614 N, EN 12164 BS 2874 - CZ 114 BS 2874, cuzn36pb2, cuzn39pb3.

Brass Pool cover Anchors Brass Anchor With Thread Brass Concrete Anchors, Corrosion resistant and hence can be used in all environments, Inside conical shape ensures equal expansion of segments while screwing,

Brass Door Hardware - Chex Aldrop

Size: 250mm x 15mm

Available Length:

Size in mm :- 250 x 15 , 300 x 15 , 350 x 15

tainless Steel Components Stainless Steel Parts SS Stainless Steel Components 304 316 SS Fittings 304 fittings 316 fittings stainless steel parts Components Stainless Steel Pipe Fittings Nipples Hose Barbs Ss Plugs Ferrules Nuts Nipples Barrel Nipples Pipe Nipples Lock Nuts Hose Fittings Pipe Tube Fittings SS 304 Ss 316 Fittings Hose Barbs Hose Tails Threaded Stainless Steel Fittings

Stainless Steel Components Material : SS AISI 304 SS 316 316L

SS Stainless Steel pipe fittings Nipples Hose Barbs SS plugs Ferrules Nuts Nipples Barrel nipples Pipe Nipples Lock nuts Hose fittings Pipe Tube Fittings SS 304 SS 316 Fittings Hose Barbs Hose Tails Threaded Stainless Steel Fittings

Stainless Steel Components Threads :

• ISO Metric (MM Threads)
• NPT Threads
• NPTF NPSM NPSF Threads threaded fittings
• UNC, UNF Threads
• Any threads as per custom design.

Stainless Steel Components Size :

• Specification or as per custom design or requirement.

Stainless Steel Components Finish And Coating :

• Natural and Electropolished

Stainless Steel Fittings Stainless Steel 304 316 SS Fittings 304 fittings 316 fittings stainless steel fittings

Stainless Steel Components Finish And Coating :

• Natural and Electro polished

A wide range of Pipe Sanitary Fittings Brass Pipe Fittings Stainless Steel pipe Fittings Stainless Steel Fittings Brass Fittings Pipe Fittings Brass Bathroom Fittings Stainless Steel Bathroom Fittings Brass Bronze Gun Plugs Elbows Crosses tees in different sizes and shapes. Each Brass Bronze Gun Metal Elbow Tee or Cross is checked for casting defects. Also available Brass Bronze gun Metal castings and casting cast parts fittings components accessories

Stainless Steel Components THREADS: 1/8" , 1/4" , 3/8" , 1/2" , 3/4" 1" 11/4" 11/2" 2" 21/2 " 3" 4" BSP Parallel BSPT UNC NPT male female and left hand threads

This Stainless Brass bell push is suitable for outdoor use.The PVD range has no lacquer to break down and the product is impervious to oxidation,

CABLE ACCESSORIES FOR CABLE GLANDS

CABLE ACCESSORIES FOR CABLE GLANDS

CABLE GLAND KITS

Available a wide range of Brass Screw machine parts Turned Parts Screw machine parts . Aluminium Copper , machined components turned parts for various engineering uses. Made strictly to customer drawings in close tolerances and free of swarf or deformities.

Screw Machine Parts Available a wide range of Brass Screw machine parts Turned Parts Screw machine parts . Aluminium Copper. machined components turned parts for various engineering uses. Made strictly to customer drawings in close tolerances and free of swarf or deformities.

We are having a large range of Brass hinges Brass Door hinges with variety of finials and end tips with color and Gold Plated. Some of our designs are shown below:

Butt Hinges Cut Hinges Brass cabinet hinges are shown here and we manufacture as small as 1/2" x 1.5mm to big size up to 8". We strictly follow the dimensions given to us by our customers. Details of different sizes and weights can be given as per customer's requirements. Also steel hinges with Brass plating are available.

We proudly say that we are having more than 75 different our own designs of Door window Handles and offer largest range of Brass handles from jamnagar and INDIA.

It was not possible to furnish all designs hereby. You can have a look to some of our fast moving designs as shown below. We have also mentioned different polishes available and the sizes for different designs.

Available in Brass Polish , Chrome Polish, Gold Plating and Lacquered Polishes. All Handles can be available from 4" to 12" . Diameter can be varied from 3/8" to 1" as per customers specification.

Brass Machined Parts Machined Components

We offer Brass Machined Parts Machined Components to user drawings and prints We specialize in machined Brass Machined Parts Machined Components Brass Turned Components Small big cast Machined Brass Machined Parts Machined Components cast Brass Machined Parts Machined Components Forged Brass Machined Parts Machined Components Stamped Brass Machined Parts Machined Components from miniature1mm to 200mm Brass Machined Parts Machined Components Turned Brass Machined Parts Machined Components to custom specification

Special Brass Machined Parts Machined Components.

We Shall Be Pleased to Develop Non-Standard Brass Machined Parts Machined Components Nuts Screws Studs Fixings.

Wood Screws Machine Screws Fasteners as per Specific Requirements

Material Used

Brass to BS 2874 / 2872

Brass Machined Parts Machined Components Threads

ISO Metric, BSW, BA, BSF, UNC, UNF UNEF etc.

2mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 16mm 20mm 25mm 32mm 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 1" 11/8" 11/4" 11/2" 13/4" 2"

Finish

Brass natural, Electro-Tinned, Nickel etc.

Brass Material used for Brass Machined Components : C 675, cz 114, c3602, c3604, c385, cz131, cz124, cz121, en 12164 - cw606n, CW 603n, CW 614n, cuzn36pb2, BS 2874 - CZ 121 Pb3, EN 12164 BS 2874, CZ 114 BS 2874 - CZ 115 c345, cuzn39pb3 & cuzn36pb3.

Brass Copper Non Ferrous Gravity Die Casting Die Castings

Copper Cast Part Component Copper Casting Foundry Copper Casting Foundries Copper Foundry Copper Foundries

Brass Die Castings Brass Copper Non Ferrous Gravity Die Casting Die Casting Brass Casting Foundry Brass Casting Foundries Brass Foundry Brass Foundries Copper Cast Parts Component Copper Casting Foundry Copper Casting Foundries Copper Foundry Copper Foundries Copper casting facility up to 40 kg's in weight and Brass casting up to 1meter in length. Our sand casting facility is well equipped to tackle any challenging Brass Casting job or Copper castings enquiry.

Material : Brass Die Castings Brass or Copper Alloy Bronzes Non ferrous alloys Bronze Copper Castings Casting

• Brass is 319 type or BS 249 type

• Any special Brass Material Composition as per customers requirement

Brass Die Castings Copper Casting Weights : from 10 Grams to 40 kg's

• We can offer Copper machined castings casting cast parts

Brass Die Castings of Size :

• Specification or as per custom design or requirement.

Finish And Coating :

• Natural, Nickel Plated, Tin Plated or any coating as per customer specification.

Any kind of special die casting sand gravity die lost wax shell molding castings and cast parts casting produced to user specifications. We can be more competitive than Chinese castings and cast parts made in China Taiwan Asia Korea as traditional Indian expertise in Brass / Copper castings and Brass Copper casting is superior and Indian Brass Copper foundry / foundries are more competitive than other Brass Copper foundries.

We shall be pleased to develop Brass Die Castings Non-Standard castings Copper Brass casting Copper Bronze Castings as per specific requirement.

Material Brass / Copper Bronze Gunmetal to BS 2874 / 2872

Finish Copper natural, Electro-Tinned, Nickel etc.

Brass Material used for Brass Die Castings : EN 12164 BS 2874 - CZ 114 BS 2874 - CZ 115 c345, cuzn36pb2, cuzn39pb3 & cuzn36pb3. C 675, cz 114, cz 115, en 12165 CW 721 r & CW 722r, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000 CDA 360 DZR Brass BS 2874 - CZ 131 CW 614 N.

Brass Stainless Steel Fluid Power Components FittingsStainless Steel Forged Stamped Elbows ( Single ferrule and twin ferrules )

Tube Size : 1/8" 3/16" 1/4" 3/8" 1/2" 3/4" 6mm 8mm 10mm 12mm 16mm

S. S. Stainless male female couplers Compression Studs

Fluid Power Components FittingsFeatures

Fluid Power Accessories Fluid Power Fittings Fluid Power Components Brass Elbows Brass Tees Brass Hydraulic Fittings Fluid Power Parts Fluid Power Components Fluid Power Accessories Fluid Power Fittings Stainless Steel Tees Stainless Steel Elbows Stainless Steel Hydraulic Fittings Brass Elbows Brass Tees Brass Hydraulic Fittings Stainless Steel Tees Stainless Steel Elbows Stainless Steel Fluid Power Accessories Fluid Power Fittings Fluid Power Components Hydraulic Fittings Hydraulic Fittings Adapters Adaptors Pneumatic Fittings Brass Hydraulic Fittings Stainless Steel Hydraulic Fittings Brass Pneumatic Fittings Brass Pneumatic Accessories Stainless Steel Pneumatic Fittings Ss Fittings

Fluid Power Components Fittings Material Used

BS 2872 CZ 112. Stainless Steel SS 304 316

Fluid Power Components FittingsThreads

m4 m5 M6 M8 M10 M12 m14.

Fluid Power Components Fittings Finish And Coating

Natural, Electro-Tin, Chrome or Nickel plated.

Brass Material Type used for CZ 114 BS 2874 - CZ 115 c377, c380, cz122, en 12165 cw617n, cw612n, cuzn40pb2 & cuzn39pb2, BS 2874 - CZ 121 Pb3 CZ 122 UNS C36000, CDA 360 DZR Brass BS 2874 - CZ 131, CW 614 N, EN 12164 BS 2874.