Braco Electricals India Private Ltd

Andheri East, Mumbai, Maharashtra

Manual Crimping Tools that we offer are perfect to be used for crimping different terminals. The name of our company surfaces prominently among the trusted Exporters and Suppliers of Manual Crimping Tools. Because of our vast distribution network, it has never been an issue for us to deliver Manual Crimping Tools within the promised time frame. Obtain from us, these tools from us at competitive prices.

 

The Range includes :

• Hand Crimping Tools
• Hydraulic Crimping Tools
• Mechanical Crimping Tools
• Cable Cutters
• Battery Operated Tools

Brass Earthing Rods & Accessories safely provide electrical connection to the ground in order to carry current away from a circuit in the event of an electrical Surge. We are one of the prominent Exporters and Suppliers of Earthing Rods & Accessories. We have a vast distribution network that enables us to deliver retail as well as bulk orders for Earthing Rods & Accessories within the committed time frame. The rods and accessories can be acquired from us at the most reasonable prices.

 

The range includes :

• Pure Copper Earth Rods

• Copper Bonded Earth Rod & Accessories

• Inspection Pits

• Earthing Plates / Mats

• Earth Rod Clamps

• Earth Points

• Conductors Accessories

• Tape Accessories

• Test Clamp

• Air Base Terminal

• Multiple Points

• Ridge Saddle

G I Pipes & Fittings, offered by us, are well tested and buying them from us will be the safest option for the buyers. We are counted among the top Exporters and Suppliers of G I Pipes & Fittings. Being a quality oriented firm, we procure these fittings only from the reputed vendors of the market. Because of vast distribution network, delivering retail as well as bulk orders for G I Pipes & Fittings on time has been an easy job for us.

 

Consist of :

• Metallic Conduits & Fittings
• Hot Dipped Galvanized Conduits
• Flexible Conduits
• Adaptable Boxes
• Switch & Socket Boxes
• EMT Fittings
• Galvanized Steel Flexible Conduit
• Stainless Steel Flexible conduit
• PVC Coated Steel Flexible conduit
• Reduce Wall Steel Flexible conduit
• UI Type Green Field Flexible conduit
• Aluminum Flexible Conduit
• Liquid Tight Steel Flexible Conduit
• Steel Braided Galvanized Steel Flexible Conduit
• Interlocked Galvanized Steel Flexible Conduit
• PVC Wire Rein Force Flexible Conduit
• Corrugated Flexible Conduit
• Accessories in Brass & Steel for all the conduits

We are engaged in the manufacturing and supplying of a wide range of Busbar in the international markets. The Metal Bus Bar, offered by us, is manufactured from excellent raw materials accessible in the market. Our Industrial Busbar is used in various mechanical and engineering applications. They are accessible in different shapes, sizes and specifications as per the requirements of the clients. In addition to this, we are considered as one of the major Stainless Steel Bus Bar Manufacturers & Exporters in India. Features :

• Available in customized specifications.
• High tensile strength.
• Endurable and long lasting.

Technical Specification of Rectangular Copper Bus Bar

• SCOPE :

This specification covers the requirement of rectangular and shaped, plain and tinned copper Bus Bar with drawn edges and in bright annealed or half hard.

• MATERIAL : The copper will be of ETP grade as per DIN 13601-2002 and with oxygen free copper.
• CHEMICAL COMPOSITION : Purity of copper will be as per DIN EN 13601:2002. Copper + Silver 99.90% min.

TYPE OF COPPER :

 

• Annealed :

Hardness 65HB Max.

• Half-Hard : Hardness 70-90 HB Max.
• Full-Hard : Hardness > 90 HB Max.

TYPE OF BUS BAR :

 

• Plain Bus Bar
• Shaped Bus Bar
• Shaped and Punched Bus Bar
• Tinned Bus Bar both in plain and shaped form.

SURFACE FINISH : Bright and smooth surface with free from injurious defects. SIZE RANGE :

• Width :

10 to 110mm

• Thickness : 3 to 10mm

DIMENSIONAL TOLERANCES Tolerance on Width and Thickness

 

Nominal Width (mm.) Tolerance onwidth (mm) Tolerance on thickness3 mm & up to 10mm. Radius onCorner (mm.) Over Upto and including       10 18 ± 0.10  ± 0.07  1.0 18 30 ± 0.15  ± 0.08  1.0 30 50 ± 0.20  ± 0.10  1.0 50 80 ± 0.25 ± 0.12  1.0 80 120 ± 0.40  ± 0.15  1.0

Radius On Corner of Full Round or Any Specific Value Required Can also Be Supplied.

Exceptional strength and excellent quality are the few words that better describe our G I Flexible Pipes. We are listed among the top Exporters and Suppliers of G I Flexible Pipes. By developing a vast distribution network, we are able to deliver G I Flexible Pipes within the stipulated time frame. Obtain from us, small as well as bulk quantities of G I Flexible Pipes at market-leading prices.

 

Consist of :

• Galvanized Steel Flexible Conduit
• Stainless Steel Flexible Conduit
• PVC Coated Steel Flexible Conduit
• Reduce Wall steel Flexible Conduit
• UI Type Green Field Flexible Conduit
• Aluminum Flexible Conduit
• Liquid Tight Steel Flexible Conduit
• Steel Braided Galvanized Steel Flexible Conduit
• Interlocked Galvanized Steel Flexible Conduit
• PVC Wire Rein Force Flexible Conduit
• Corrugated Flexible Conduit
• Accessories in Brass & Steel for all the conduits

Crimpling Range 4-70mm2Crimping Force 8TCrimping Type Hexagon CrimpingStroke 10mmLength Approx.310mmWeight Approx.2.80kgPackage Plastic BoxWeight of Box Approx.0.56kgCrimping Dies 4, 6, 8, 10, 16, 25, 35, 50, 70mm2

Crimping Type Hexagon CrimpingCrimping Range 6-50mm2Length Approx.380mmWeight 1.10kgPackage Colorful Paper Box

BW Type Brass Glands These glands provide mechanical cable retention, and electrical continuity via armour wire ttermination. the use of these glands is recommended in dry, indoor situations. Shrouds may be used for ingress protection.

Copper Crimping Ring Tongue Fork Terminals lugs are designed to offer maximum efficiency under heavy-duty applications. Therefore these Terminals lugs are ideal for use in applications which are subject to continous mechancial vibrations Viz. engines, railways, moving components etc. The terminal barrel is brazed and soft annealed, which means that the terminal can be crimped in either direction.

Open Close Soldering Type Copper Ring Terminals are made out of EC grade copper. These Terminals lugs ensure completeness and ease of conductor entry so that contact is reliable and have more tensile strength. The Terminals lugs are annealed to avoid cracking or breaks and are tin plated to avoid oxidization and to achieve maximum corrossion protection.

Copper Crimping End Sealing Ferrules is needed at the end of a cable. Some cables, especially those with small diameters, may conduct badly in electrical connections without an End Sealing Ferrule. By using these ferrules strands deviation can be avoided and the risk of cable breakage can be reduced. Also these ferrules create a long lasting contact pressure and a large contact surface. Tinning is provided to give better finish, to avoid oxidisation and to achieve maximum corrosion protection.

Copper Crimping End Sealing Insulated Ferrules These ferrules have dimensions according to DIN 46228 and are used when a perfect connection is needed at the end of a contact pressure and a large contact surface. Tinning is provided to give better finish, to avoid oxidisation and to achieve maximum corrosion protection. The Insulation Sleeve is manufacture from PP (Polypropylene). We also offer end Terminals lugs with insulation colours according to the most common colour system in the market. The colour of the insulation sleeves characterises the Cross section area of the conductor

Soldering Type Weak Back Ferrules of copper and are used to solder straight through joints. Tinning is provided to give better finish, to avoid oxidisation and to achieve maximum corrossion protection.

Extended Palm Blanks Copper Crimping Terminal Ends for Copper Conductor is required as it can easily accomodate two bolts to reduce drift. All Terminals lugs are standard with blank palm and stud holes can be punched to order. These Terminals lugs are normally used in vibrating application. The presence of inspection hole facilates full insertion of conductor. The Terminals lugs are tin plated to avoid oxidization and to achieve maximum corrossion protection.

Copper Tube In-Line Connectors are designed for jointing low voltage conductors. Made of electrolytic copper tube having the same dimension as CT series lugs, Braco connectors are annealed and electrolytic ally tin plated. They feature an internal taper at both ends to ease the introduction of conductor and a dimple (if required) to ensure correct positioning. These connectors can also be provided with insulation. Tinning on connectors provides better finish, avoids oxidisation and achieves maximum corrossion protection.

Copper Tube In-Line Connector Insulated These type of Terminals lugs are applicable in tunnel type terminal blocks viz. fuse gears, cut-outs, meters etc. Braco is able to produce any Copper Reducing Link that you may require. The presence of copper at termination end ensures high current carrying capacity at smaller surface area. Tinning avoids oxidisation and provides maximum corrossion protection.

Aluminium Crimping Connectors of purity equal to or greater than 99.5% having maximum conductivity not less than 60% IACS and the designed as per IS 5082. These connectors facilitate joining two identical size Aluminium conductors.

CW Type Brass Glands These glands provide mechanical cable retention, and electrical continuity via armour wire termination. The use of these glands is recommended in indoor as well as outdoor application because of suitability in most climatic conditions weather proof and water proof.

A2 Type Brass Glands for unarmoured, plastic or rubber sheathed cables. These glands provide outer seal joint and are suitable for indoor as well as outdoor applications.

Brass Earth Tags is normally achieved via the screwed entry into metal boxes. For clearance hole entry situations it is essential to obtain direct metal-tometal contact between the gland, earth tag and the enclosure. These are used to ensure earth continuity between the gland and the equipment.

E1w Type Glands These glands are suitable for all types of SWA cable, providing environmental seal on both the cable inner and outer sheaths.the glands also provide mechanical cable retention and electrical continuity via armour wire termination

Gland Kits that is necessary for terminating a cable run Gland(s), Earth tag(s), locknut(s) and shroud(s). Since the kits are ready to use hence are convenient and help to keep all parts for each termination together. The kits are easier to stock than loose pieces.

we are the Manufacturer of this products a terminal is the point at which a conductor from an electrical component dives or network comes to an end & provides a point of connection to external circuits