The VSX is a new series of split-case pumps with several features never before offered in the HVAC industry. The VSX Series is manufactured by Bell & Gossett. The pumps are designed to provide unparalleled performance and reliability over a wide range of applications.

• Capacities: from 110 to 3400 m/h
• Head: from 9 to 130 m
• Working Pressures of 12 and 20 bar
• ANSI Flange Ratings of 55 and 110 Kg
• Temperature from -15 to 150 C
• Internally Self-Flushing Mechanical Seals
• ANSI / OSHA coupling guard
• Alignment-friendly, variable speed capable coupling
• One-piece unitized mechanical seal to simplify servicing
• Maintenance-free bearings

HSC3 SERIES

Double-suction, base-mounted Series HSC pumps are available in 2 through 10 sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 400 feet. Bronze-fitted construction with a maximum working pressure of 175 psig. The HSC features internally self-flushing mechanical seals for maximum lubrication, debris removal and heat dissipation.The internally flushed seals allow for a shorter shaft for reduced deflection for longer seallife. Closed-end steel baseplate with full seam welds for strength and an open top for easy grouting. The pump bearings and mechanical seals can be serviced without disturbing the upper casing half, piping connections or electrical motor connections. An ANSIOSHA-compliant coupling guard shields the flexible coupler.

A-C Fire Pump Systems and Skid Packages

The A-C range of custom-built fire pump systems including prefabricated packages and house units that meet every fire protection need. Products include in-line pumps, end suction, vertical turbine, jockey pumps and three Split Case series. A-C Fire Pump Systems are designed in accordance with NFPA 20, FM/UL approved.

GEN SERIES PUMPS

With End suction pumps FHF Series. The FHF range of the GEN booster sets features a cast iron pump body, bronze impeller and stainless steel shaft. These horizontal centrifugal pumps have many size options.

• FHF Series

Xylems Hydropneumatic Pumping System is supplied as a complete set including suction and discharge common manifolds, non-return valves, isolating valves, pressure transmitter, and pressure gauge of suitable range on the discharge side, float switch for the suction tank and control panel inclusive of dedicated pumping controller (CONSYS), variable frequency drive, circuit breakers, fuse and other necessary electrical components for Manual and Auto operation.

end suction pump True back pullout design for fast, simple, cost effectivemaintenanceSolid-Foot Mounted VoluteInternally Self-Flushing Mechanical SealCenter Drop-OutSpacer CouplingComputer ControlledImpeller Balancing

The VSX is a new series of split-case pumps with several features never before offered in the HVAC industry. The VSX Series is manufactured by Bell & Gossett. The pumps are designed to provide unparalleled performance and reliability over a wide range of applications.

• Capacities: from 110 to 3400 m/h
• Head: from 9 to 130 m
• Working Pressures of 12 and 20 bar
• ANSI Flange Ratings of 55 and 110 Kg
• Temperature from -15 to 150 C
• Internally Self-Flushing Mechanical Seals
• ANSI / OSHA coupling guard
• Alignment-friendly, variable speed capable coupling
• One-piece unitized mechanical seal to simplify servicing
• Maintenance-free bearings

HSC3 SERIES

Double-suction, base-mounted Series HSC pumps are available in 2 through 10 sizes. Motor sizes through 300 HP. Flows to 6500 GPM and heads to 400 feet. Bronze-fitted construction with a maximum working pressure of 175 psig. The HSC features internally self-flushing mechanical seals for maximum lubrication, debris removal and heat dissipation.The internally flushed seals allow for a shorter shaft for reduced deflection for longer seallife. Closed-end steel baseplate with full seam welds for strength and an open top for easy grouting. The pump bearings and mechanical seals can be serviced without disturbing the upper casing half, piping connections or electrical motor connections. An ANSIOSHA-compliant coupling guard shields the flexible coupler.

A-C Fire Pump Systems and Skid Packages

The A-C range of custom-built fire pump systems including prefabricated packages and house units that meet every fire protection need. Products include in-line pumps, end suction, vertical turbine, jockey pumps and three Split Case series. A-C Fire Pump Systems are designed in accordance with NFPA 20, FM/UL approved.

GEN SERIES PUMPS

With End suction pumps FHF Series. The FHF range of the GEN booster sets features a cast iron pump body, bronze impeller and stainless steel shaft. These horizontal centrifugal pumps have many size options.

• FHF Series

Xylems Hydropneumatic Pumping System is supplied as a complete set including suction and discharge common manifolds, non-return valves, isolating valves, pressure transmitter, and pressure gauge of suitable range on the discharge side, float switch for the suction tank and control panel inclusive of dedicated pumping controller (CONSYS), variable frequency drive, circuit breakers, fuse and other necessary electrical components for Manual and Auto operation.

end suction pump True back pullout design for fast, simple, cost effectivemaintenanceSolid-Foot Mounted VoluteInternally Self-Flushing Mechanical SealCenter Drop-OutSpacer CouplingComputer ControlledImpeller Balancing