BOMBAY TOOLS CENTRE

Broadway, Chennai, Tamil Nadu

We are distributor & trader of Digimatic Indicator (Standard Type).

Features:

• As compact as standard Series 2 dial indicators.
• Large, easy-to-read LCD.
• GO/NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindles up/down movement can be toggled.
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle Absolute Position from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330 to an appropriate angle for easy reading.
• With SPC data output.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.01mm, 0.001mm, .0005/0.01mm, .0001/0.001mm or .00005/0.001mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. Response speed: Unlimited
• Measuring force: Refer to the list of specifications
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 5, 000 hours under normal use
• Dust/Water protection level: IP42 or IP53 (dust-proof type)

Functions:

• Origin-set/Preset, Zeroset, GO/NG judgment, Counting direction switching, Power ON/OFF, Data output, inch/mm
• conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
• Internal calculations using the simple formula of [F(x)=Ax)] are available

We are distributor & trader of Digimatic Indicator with Back Lit LCD Screen.

Features:

• With the ABSOLUTE Linear Encoder technology, once the measurement reference point has been preset it will not be lost when the power is turned on.
• GO/NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.
• An analog bar indicator has been integrated to handle upper/lower limit approaching and zero approaching. It enhances the ease of operation in the same manner as a dial indicator. The display range of the analog bar can be changed.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.01mm/0.001mm or .00005/.0001/.0005/.001/0.001mm/0.01mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. response speed: Unlimited
• Measuring force: 1.8N/2.3N* or less (*50mm range models)
• Power supply: 9V DC (via AC adaptor)

Functions:

• Origin-set/Preset, Zeroset, GO/NG judgment, Max/Min value hold, Runout measurement, Resolution switching, Counting direction switching, Power ON/OFF, Data output, inch/mm.
• conversion (on inch/metric models only).
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error.

Standard Accessories:

• 06AEG180JA: AC Adapter 120v
• 137693: Lifting Lever

We are Supplier & trader ofDigimatic Indicator with Bore Gauge Type.

Features:-

• This ID-C Series Digimatic Indicators are exclusively designed for ID measurement.
• The minimum value holding function provides the easy of detection of hole diameter.
• An analog bar indicator is integrated to enhance the intuition in reading.
• GO/NG judgment is performed by setting the upper and lower tolerances.
• Up to three sets of master value and upper/lower tolerance value can be memorized.
• Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin at power-on.

We are distributor & trader of Digimatic Indicator with Calculation Type.The Absolute Digimatic indicator performs internal calculations using the formula Ax+B+Cx-1 (assuming spindle displacement as x) while the specified coefficients A, B and, C can be set with respect to the purpose of measurement or dimensions of the fixtures. This unique feature allows you to read your measurements directly, without fumbling for conversions.

We are distributor & trader of Digimatic Indicator with Dust Water Protection.

Features:

• Proven absolute sensor.
• Rated to IP66 water- and dust-proofing standard and oil resistance improved.
• Slim body design is advantageous for multi-point measurements.
• Improvement in workability with the LCD readout-rotation function.
• Back plunger design (ID-B).
• Built-in tolerance judgment function.
• Switchable resolution.
• Waterproof data output connector.
• Built-in hold/preset function

We are supplier & trader of Digimatic Indicator with Slim Economical Design.

Features:

• Slim type digital indicator with low price.
• Large LCD and simple key operation.
• After the initial origin setting, the ID-U no longer needs absolute positioning over the entire battery life; the origin is remembered even after power-off.
• Ideal for installation into measuring devices because of its compact design and long battery life.
• Employing the ABSOLUTE linear encoder, the ID-U always displays the spindle Absolute Position from the
  • origin at power-on. Also unlimited response speed eliminates over-speed errors.
  • Flat back type only no option for backs.
  • SPC data output. Technical Data:Accuracy: Refer to the list of specifications.Resolution: 0.01mm or .0005/0.01mmDisplay: LCDLength standard: ABSOLUTE electrostatic capacitance type linear encoderMax. response speed: UnlimitedMeasuring force: Refer to the list of specificationsBattery: SR44 (1 pc.), 938882Battery life: Approx. 20, 000 hours under normal useDust/Water protection level: IP42 FunctionOrigin-set, Zeroset, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion(on inch/metric models only)Alarm: Low voltage, Counting value composition error, Over-flow error Optional Accessories 905338: SPC cable (40 / 1m) 905409: SPC cable (80 / 2m) 540774: Spindle lifting cable (stroke: .4 / 10mm)

We are supplier & trader of Digimatic Indicator with Signal Output Function Type.

Features:-

• With max./min. value holding function model of the ID-C Series Digimatic Indicators.
• The maximum, minimum, or runout value can be displayed during measurement.
• GO/NG judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
• High speed sampling ratio of 50 times/s.
• Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin at power-on.

Technical Data:-

• Accuracy: Refer to the list of specifications.
• Resolution: 0.001mm, .00005/0.001mm or .0001/0.001mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder

• Max. response speed: Unlimited
• The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion or
• lip in a hole, in addition to standard depth measurement
• With fine adjustment models are available.
• Optional wider extension base are available.Measuring force: 1.5N or less
• Battery: SR44 (2 pcs.), 938882
• Battery life: Approx. 800 1300 hours under normal use
• Dust/Water protection level: IP42

Function

• Origin-set/Preset, Zeroset, GO/NG judgment, Max/Min/Runout value holding, Counting direction switching, Power
• ON/OFF, Data output, inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error

We are supplier & trader of Digimatic Indicator with High Accuracy High Functional Type.

Features:

• This new-generation digital indicator offers the excellent accuracy and functionality expected from this class of indicator. Take advantage of its high accuracy backed up by 0.5m / .00002 resolution, remote control function ality via a handheld controller (or an RS-232C interface) and easy runout measurements with the well-established analog bar display.
• The maximum, minimum, or runout value can be displayed during measurement.
• GO/NG judgment is performed by setting the upper and lower tolerances. If a judgment result is out of tolerance, the display backlighting changes from green to red, so tolerance judgment can be made at a glance.
• With SPC data output.
• With RS-232C input/output

We are distributor & trader of Lever Dial Indicators.

Features:

• Jeweled bearings assure higher sensitivity and accuracy.
• Reversible measuring direction.
• Two holding bars are supplied. (Full sets only.)
• Fully adjustable bezel/dial face.
• Contact point is adjustable within 220.
• Bezel is sealed with on O-ring to keep out water/oil.

We are supplier & trader of Pocket Type Dial test Indicators.

Features:

• Jeweled bearings assure higher sensitivity and accuracy.
• Reversible measuring direction.
• Two holding bars are supplied. (Full sets only.)
• Fully adjustable bezel/dial face.
• Contact point is adjustable within 220.
• Bezel is sealed with on O-ring to keep out water/oil.

We are distributor & trader of Dial Indicator Large Dial Face.

Features:

• Dial gages with a large-diameter (92mm/3.62)graduation face to ease reading.
• All types come with limit pins and an outer frame clamp as standard.

We are distributor & trader of Dial Indicator Long Stroke Type.

We are distributor & Trader of Dial Indicator One Revolution Type.