BOMBAY TOOLS CENTRE

Broadway, Chennai, Tamil Nadu

We are Leading supplier & trader of Extension Rods for Bore gages.

Technical Specifications:

• Different length of extensions are available for bore gauges to check deep applications

We are Leading supplier and trader ofSetting Rings.

Specifications:

• Used for quick zero adjustment of dial bore gages, Holtest, and inside micrometers.
• Actual inside diameter is marked on each ring.

Technical Specifications:

• Tolerance between the nominal size and the actual diameter:
• 0.01mm for 1 45mm setting rings
• 0.02mm for 50 300mm setting rings
• .0004 for .1 1.8 DIA. setting rings
• .0008 for 2 12 DIA. setting rings
• Cylindricity:
• 1.0m for 1 60mm setting rings
• 1.5m for 62 90mm setting rings
• 2.0m for 100 150mm setting rings
• 2.5m for 175 225mm setting rings
• 3.0m for 250 300mm setting rings
• .00004 for .1 2.4 DIA. setting rings
• .00006 for 2.5 3.6DIA. setting rings
• .00008 for 4 6 DIA. setting rings
• .00010 for 7 9 DIA. setting rings
• .00012 for 10 12 DIA. setting rings

Features :

• These slotted angle plates have all the features of Code 751 except are provided with convenient clamping slots for mounting and are widely used for machining lay out and inspection.
• Spplied in two types webbed end have side webs & an open end.
• Code 754G : Open End Precision Ground

Measures the thickness of Non-magnetic coating on magnetic base.

The coating may be of materials like:

• as Plating : Gold, Copper, Zinc, Tin, Chromium, Hard Chromium, Lead etc.
• as Coating: Paint, Resineous coating.
• as Lining: Resin, Rubber, Fibre Glass.
• as Film: Plastic, Metal foils.
• Parkerising
• Metalising
• Insulation coating.

The magnetic base may be of materials like;

• Iron
• Nickel
• Cobalt
• Magnetic Stainless Steel etc.

Salient Features :

• Dial type Direct reading.
• Portable.
• Reading can be locked.
• Testing foils of different thickness are provided.
• Can be used in all positions viz. vertical, horizontal or in an incline plane.
• For precise reading mirror is provided below scale.
• Supplied in an attractive case and with instruction manual.

Applications:

• Holds all R Glades & SD-C & SD-P Holders

DMC Bench Press Style Open Frame Crimp Tools UDT4 & UDT3

The UDT4 & UDT3 tools have the die frame opening on the opposite side of the tool frame from the HX4 & HX3 so the tool can be used as a portable bench top press or as a hand tool. The tool frames are equipped with the same positive ratchet assembly and accept the same Y and X series dies. When used as a bench top press, the operator gains a greater mechanical advantage, thereby reducing operator fatigue.

DMC is dedicated to serving the connector tooling needs of the electronics industry. we, therefore, top off our product package with a wide variety of installing and removal tools. Although we supply both plastic and metal tools, we recommend the use of the metal tools because of their durability. When used properly they are more cost effective in that they withstand thousands of contact insertion and removal cycles. The trend to all metals tools is being actively encouraged by most departments of the government. DMC installing and removal tools are of proven high quality and reliability. in addition to the tools listed in these reference table, we have many more for other connector applications. please contact us for more details. DMC1155 general purpose insertion & removal tool kit DMCs general purpose insertion and removal tool kit (p/n: dmc1155) contains metal insertion and removal tools for common mil-spec circular connectors, d-sub miniature connector, arinc connectors and as81714 terminal junctions.

MIL-C-28840 connectors were developed for the navy, for use with jacketed cable in shipboard applications. They are a high density circular connector series utilizing a high shock threaded coupling system with front release crimped contacts.

For these connectors dmc has added a new crimping tool to its range, the M22520/34-01 and other tools as follows:

CUP ANEMOMETER/BAROMETER/HUMIDITY/TEMP.

Model : ABH-4224

* Air velocity : 0.9 to 35.0 m/s, ft/min., km/h, mile/h, knots.

* Barometer : 10 to 1100 hPa, mmHg, inHg.

* Humidity : 10% to 95% RH, Dew.

* Temperature : 0 to 50 oC, oC/ oF.

* All in one, hand held type.

* Cup type probe, no wind direction.

* Hold, Record (max., min.).

* DC 1.5V battery (UM-4, AAA) x 4.

SD Card real time data recorder,

HOT WIRE ANEMOMETER, + type K/J Temp.

Model : AM-4214SD

* Real time data recorder, save the data into the SD memory card and can be down load to the Excel, extra

software is no need.

* 0.2 25.0 m/s, high precision for low air velocity measurement.

* m/s, ft/min, km/h, knots, mile/h, oC/oF.

* Type K Thermometer : -100 to 1300 oC, oC/oF.

* Type J Thermometer : -100 to 1200 oC, oC/oF.

* Data hold, Record (Max., Min.).

* RS232/USB computer interface.

* Patented.

* Patent: Taiwan, China, Japan, Germany, USA pending.

ANEMOMETER (w/ Temp.)

Model : AM-4202

* 0.4 to 25.0 m/s, m/s, ft/min, km/h, knots, Temperature, Data hold, 18 mm LCD.* Low-friction ball-bearing vane.

ANEMOMETER

Model : AM-4203

* -P circuit, 0.4 to 25.0 m/s.

* Max., Min., Memory recall button.

* m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF).

* Size : 180 x 72 x 32 mm. RS-232.

HUMIDITY/ANEMOMETER METER, + type K/JModel : AM-4205A

* Anemometer : 0.4 to 25.0 m/s. m/s, ft/min., km/h, mile/h, knots, Temp.

* Humidity meter / %RH : 10 to 95 %RH.

Humidity/Temp. : -10 to 50 oC, oC/oF.

* Type K thermometer : -50 to 1300 oC, oC/oF.

* Type J thermometer : -50 to 1100 oC, oC/oF.

* Max., Min., data hold, RS-232 interface.

ONTACT TACHOMETER

Model : DT-2234B

* 5 to 100, 000 RPM

CONTACT TACHOMETER

Model : DT-2235B

* 0.5 to 19, 999 RPM.

* m/min, ft/min, inch/min.

PHOTO/CONTACT TACHOMETER

Model : DT-2236

* Photo Tach. : 5 to 100, 000 RPM

* Contact Tach. : 0.5 to 19, 999 RPM.

Surface speed : m/min, ft/min.

* Size : 215 x 65 x 38 mm.

* Patented.P margin-bottom: 0.08in; LASER PHOTO/CONTACT TACHOMETER

Model : DT-1236L* Patented, the best tachometer in the world.

* Long detecting distance for photo Tach. up to 2 meters.

* Photo & contact tachometer in one meter.

* Fast sampling time for low contact RPM measurement, automatic reverse display.* Photo Tach. : 10 to 99, 999 RPM*Contact Tach. : 0.5 to 19, 999 RPM.

*Surface speed : m/min, ft/min.

* Size : 215 x 67 x 38 mm, patented.

PHOTO/CONTACT TACHOMETER

Model : DT-2238

* Photo Tach. : 5 to 100, 000 RPM

* Contact Tach. : 0.5 to 19, 999 RPM.

* Surface speed : m/min, ft/min.

* Size : 195 x 61 x 38.5 mm.

* Patented.

Model : DT-2237

GASOLINE TACHOMETER

* Non-contact engine RPM measuring.

* Available the automobile engine, motorcycle engine, generator engine.

* 10 to 50, 000 RPM, 0.05% accuracy.

* Memory (Max., Min., Last value).

Muti-function THERMOMETER, Real time data logger

Model : YK-2005TM

* High capacity, 16, 000 data logger point.

* Real time data logger (record year, month, date, hour, minute, second).

* Multi-function : Type K, Type J, Pt100 ohm, Infrared Thermometer.

* Type K : -50 to 1300 oC, Type J : -50 to 1100 oC, Pt 100 ohm -200 to 850 oC.

* Optional probe : Type K probe, Type J probe, , PT 100 probe, IR probe.

* Max., Min., Data hold, zero adjust.

* RS232/USB computer interface.

* Optional data transmission software, SW-DL2005.

* Jumbo LCD display.

* DC 1.5V ( UM3, AA ) x 4 PCs or DC 9V adapter in.

* Size : 203 x 76 x 38 mm.

Available in Length of 16cm

We are one of the well-known trader and distributor of Flat Files. The offered flat files are commonly used for the sharpening of instrument edges. Our distributed flat files are made from superior grade raw materials, sourced from very reliable and trusted vendors in the market. The offered flat files are available at very cost effective market price.

Features:

Specification:

• Available in Rough , Medium (IInd Cut) & smooth
• Lengths available are 4, 6, 8, 10, 12, 14

Specification:

• Available in Rough , Medium (IInd Cut) & smooth
• Lengths available are 4, 6, 8, 10, 12, 14

• Available in IInd Cut
• Available in Length of 16cm

Specification:

• Available in Rough, Medium (IInd Cut) & smooth
• Lengths available are 4, 6, 8, 10, 12, 14

Specification:

• Available in Rough, Medium (IInd Cut) & smooth
• Lengths available are 4, 6, 8, 10, 12, 14

• Available in loose sizes from 1.5mm 36mm & 1/16 1.
• Also available in sets of standard length, long pattern with ball & extra long pattern with ball.
• All the sets are available in both metric & inches separately.

We are supplier & trader ofBolt Cutters.

We are supplier & trader ofChisel.

We are supplier & trader ofScrew Drivers.

We are supplier & trader ofSide Cutter / Diagonal Cutter

Different variety of sockets along with accessories are available in loose and in sets

Trolley are available with 5 & 7 drawers with wheels.

We are supplier & trader ofWire Strippers.

We are among the prominent distributors and traders of Brinell Microscope. The offered microscope is light in weight and can be carried from one place to another. It is used for measuring the hardness of ferrous and non ferrous metals in industries including metal, scientific research institutes and mines. Being exceptional in quality, it is accurate in measurements and is user friendly as well.

Specifications:

• Graticule Scale Size: 7 Mm
• Power: 7w
• Voltage: 230v
• Magnification: 30x
• Field Of View: 9 Mm
• Measuring Accuracy: 2-3 microns. For use with bse metal-cum-concrete tester
• Model: IHC or, any other make Brinell hardness tester. Also useful in tool-rooms, workshops, etc
• Model: Mac 30

We are engaged in distributing and trading Stand Durometers, which is used for positioning durometers. The offered stand is exceptional in tensile strength and is provided with hooks for holding the device. It is spacious and the specimen kept on the floor of the stand can be lifted near the device by pressing the knob. Backed by our sophisticated logistics, we are enabled to handle bulk orders comfortably.

These are standard devices suitable for holding the Durometers so as to allow for a series of tests quickly.

The tester is fitted on to the pins in the stand and the specimen kept on the platform is lifted to the tester by pressing the knob.

Separate stands are used for Shore-A and Shore-D testers as each stand has a separate built in loading device to give a constant contact pressure confirming to international standards.

MODEL : STD A MODEL : STD D

Technical Specifications:

• Admit: 45 mm
• Packing: Deluxe wooden box
• Dimensions: 275 x 230 x 100 mm
• Weight: 3.55 kg
• Range: 0 to 100 as per testers

Model Available:

• Model: STD-A
• Model: STDD

We are among the distinguished names in the industry for distributing and trading Portable Thickness Gauge, the offered gauge is light in weight, portable and exceptional in performance. It is used for measuring the thickness of non ferrous and ferrous substances. The product is made in a sophisticated manufacturing unit and provides with accurate measurements. It is cost effective and can be supplied in bulk.

Its available in Handy and portable type.

For Diamond Industry a)DG 11 (10 x 10 mm)b)DG 22 (20 x 20 mm)

For General Purposec)DG 12 (10 x 20 mm)d)DG 25 (20 x 50 mm)Least Count 0.1 mm Features:

• Cost-effective
• Tensile strength
• Highly durable

Range Available:

• DG-11 (10 x 10 mm)
• DG-22 (20 x 20 mm)
• For General Purpose
• DG-12 (10 x 20 mm)
• DG-25 (20 x 50 mm)
• Least Count 0.1 mm

We are among the prominent industry players, engaged in distributingFoam Durometers, which is extensively used for detecting the hardness of sponge, plastic and rubber. The offered durometer is compact in size and provides with accurate measurements. Being equipped with a large dial and clear markings, it is comfortable to be read. Our sophisticated facilities have enabled us to manage bulk orders conveniently.

Features:

• Cost-effective
• Tensile strength
• Low maintenance

We are among the celebrated names in the industry for distributing and trading Yarn Durometers. The offered product is highly demanded for testing the winding density of textile cones, bobbins, quills and packaging dyeing tubes. It is compact in size and dimensionally accurate. Being procured from renowned vendors, it is durable and resistant to scratches.

Specifications:

• Indentor tip size: 3/32(2.5 mm) or 5.0 mm
• Shape: Spherical

We are distributor & trader of Absolute Digimatic Height Gauge.

Features:

• Built in absolute linear encoderThis encoder eliminates the necessity of setting the reference point at every power-on. It has improved reliability because no over-speed error will occur.
• Rigid column structure ensures high measuring accuracy.
• With large smooth slider feed wheel.
• Carbide-tipped scriber is provided.
• With SPC data output.

We are distributor & trader of Height Gage Carbide Tipped Scribers.

Features:

• Excellent accuracy of (1.1+0.6L/600)m with 0.1m/0.5m resolution/repeatability.
• Perpendicularity (frontal) of 5m and straightness of 4m are guaranteed.
• Pneumatic full/semi-floating system allows adjustment of air-cushion height.
• Basic statistical functions are provided and, additionally, RS-232C / USB data output provides the option of evaluating measurement data externally with SPC software on a PC.
• One-key operation for running a semi-automatic measurement.
• Data entry from a Digimatic tool.

Technical Data:

• Measuring range: 0 38 / 0 972mm
• Slider stroke: 24 / 600mm
• Resolution: 0.0001 / 0.001 / 0.01 / 0.1mm or (switchable)
• 0.0001 / 0.001 / 0.01 / 0.1mm / .000001 / .00001 / .0001 / .001
• Accuracy at 20C: Refer to the list of specifications.
• Floating method: Full / semi-floating with built-in air compressor
• Display:TFT LCD (color)

We are supplier & exporter of Heightmatic Guage.

Features:-

• Provides resolution of .0001 / 0.001mm on the large LCD readout for accurate measurements.
• Excellent functionality and easy operation.
• The standard bi-directional touch-signal probe provides improved efficiency and reliability of measurement for the Heightmatic.
• Optional carbide-tipped scribers are available.
• With SPC data output.

Technical Data:-

• Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)
• Repeatability: .0001 / 0.001mm
• Resolution: 0.001mm or .0001/0.001mm
• Display: LCD, 6-digit
• Power supply: Via AC adapter

Function:-

• Zero-setting, Presetting, Probe tip diameter compensation, -/+ switching, Data hold, Data output, inch/mm conversion
• (inch/mm models)
• Alarm: Counting value composition error

Standard Accessories:-

• 574-007: Touch-Signal Probe
• 901385: Scriber Clamp
• 06AEG180JA: AC Adapter

We are supplier & trader of Linear Height Gage.

Features:-

• Excellent accuracy of (1.1+0.6L/600)m with 0.1m/0.5m resolution/repeatability.
• Perpendicularity (frontal) of 5m and straightness of 4m are guaranteed.
• Pneumatic full/semi-floating system allows adjustment of air-cushion height.
• Basic statistical functions are provided and, additionally, RS-232C / USB data output provides the option of evaluating measurement data externally with SPC software on a PC.
• One-key operation for running a semi-automatic measurement.
• Data entry from a Digimatic tool.

Technical Data

• Measuring range: 0 38 / 0 972mm
• Slider stroke: 24 / 600mm
• Resolution: 0.0001 / 0.001 / 0.01 / 0.1mm or (switchable)
• 0.0001 / 0.001 / 0.01 / 0.1mm / .000001 / .00001 / .0001 / .001
• Accuracy at 20C: Refer to the list of specifications.
• Floating method: Full / semi-floating with built-in air compressor

Display:TFT LCD (color)

We are Leading distributors & trader of Bowers Micro Gauge 2-Point Bore Gauge. The new MicroGauge 2-point bore gauging system has been designed specifically for the measurement of small bores between 1.0-6.0mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

Features:

• System range: 1-6mm
• New slimline digital display
• Switchable resolution 0.01/0.001/0.0005mm
• Simple 2-button operation
• Clear LCD display
• Data output: RS232 / USB proximity sensor
• Linearity: Diameter 1.0-1.5 max 2% of measuring travel, min 0.001mm.
• Diameter 1.5-6 max 1% of measuring travel, min 0.001mm
• Repeatability : 0.001mm
• Available as individual instruments or sets
• UKAS-certificates as standard with all setting rings
• Hard-chromed ball-contacts
• Depth-stops available
• Stand available as an option

We are distributor & trader of Digimatic Holtest.

Features:

• TiN-coated contact points provide excellent durability and impact resistance and allow the instrument to measure to the bottom of a blind hole.(up to 100mm/4models)
• Large LCD readout.
• Functions available: Presetting, Zero/ABS, power On/Off Data hold, Data out put, Error alarm, Battery replacement alarm.
• With Ratchet Stop for constant force.
• Can measure deep holes by attaching an Extension rod(optional).
• Setting rings for origin point setting are optional.
• Supplied in fitted plastic case up to 100mm / 4. Over 100mm / 4 supplied in wooden case.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.001mm or .00005/0.001mm (over 5 models: .0001/0.001mm)
• Contact point:TiN-coating
• Measuring method: Three-point method
• Display: LCD
• Battery: SR44 (2 pcs.), 938882
• Battery life: Approx. 8 months under normal use

Functions:

• Zero-setting, Data hold, Data output, Preset, inch/mm conversion (inch/mm models) Alarm: Low voltage, Counting value composition error

Available in different length, width, thickness & TPI

Band saw blades can be cut and welded to any length. When ordering band saw blades you need to supply

the following information:

• Kind of blade materlal (Bi- Metal, Hardback, Flexback)
• Length of blade
• Width of blade
• Tooth pitch (Teeth per Inch)

Neither the number of teeth per inch, set or style affect the price. Only the type of material, length and width

determine price.

• A finer tpi will give longer blade life.
• For bundles, select a tpi one step coarser than appropriate for the single unit.
• TPI must be correct for hard to cut materials else the blade life will be shortened.
• Finer TPI gives better finish

Available from 3-100mm & 1/8 5

Available in Metric, BSW, BSF, UNC, UNF, BSP, BSPT, NPT, UN

Also available in Hand Tap, Machine Tap, Long Shank Machine Tap, Spiral Tap, SPPT Tap.

• Available from 0.3-20mm & 3/64 7/8
• Also available in Long, Extra Long type

Available in different length, width, thickness & TPI

We are distributor & trader of Tubular Inside Micrometer Extension Rod Type.

Specifications:

• Wide range of ID measurements by combining extension rods (pipes) and anvils with the micrometer head.
• Carbide-tipped measuring faces are available. (series 137)
• The 139 and 140 series use highly-durable/ large-diameter extension pipes.
• Series 137 supplid in fitted plastic case except 1550mm/60in come in wooden case.
• Series 139 supplied in fitted wooden case except 500mm/20in come in plastic case.
• Series 140 supplied in fitted wooden case

We are distributor & trader of Clamps Holders.

Applications:

• Swivel Clamps can be used with Holding Bars.

We are distributor & trader of Stylus.

Standard Ans Special Anvils:

• Tungsten Carbide / Saphire/ruby Ball Anvils.
• Flat/hemi-spherical /chisel/needle/stylus/conical/long Conical Point Anvils.

Standard And Special Backs:

• Centre Lug Back / Flat Back/ Sliding Back Female/ Sliding Back Male/ Sliding Back Male With 8 H6 Spigot.

We are distributor & trader of Micro Jacks.

Features:

• Used for accurate leveling of machines, surface plates, and other precision instruments.
• Easy adjustment under heavy load.

Technical Data:

• Graduations: 0.01mm

Application Purposes In Potentially Explosive Environments.Most of our Non Sparking Tools are Forged after Casting to achieve better Quality, Performance & Attractive Finish. Available in all Sizes.

Non Sparkling Sockets are available from a range of 8mm to 32mm

We are distributors & trader of contact points.

Standard and Special Anvils:

• Tungsten carbide / sapphire/ruby ball anvils.
• Flat/hem-spherical /chisel/needle/stylus/conical/long conical point anvils.

Standard and Special Backs:

• Center lug back / flat back/ sliding back female/ sliding back male/ sliding back male with 8 h6 spigot.

Air Braders and Coil Nailers

Air Micro Die Grinders

Air Saws & Cutting Tools