Our Products
Leading Manufacturer, Supplier & Retailer of lux meters, Clamp Meter, milli-ohm meter, Ph Meters and Sound Level Meters.
LIGHT METER
Model : LX-105
* -P circuit, 2, 000/20, 000/50, 000 Lux.
* Max., Min., Memory recall button.
* Lux, Ft-candle, % values, wide range.
* 4 light type select by push button.
* Size : 180 x 72 x 32 mm. RS-232.
LIGHT METER
Model : LX-107HA
* 2, 000/20, 000/100, 000 Lux, Data hold.
* Lux, Ft-candle, max., min., zero, 2 filters.* Tungsten, Fluorescent, Mercury, Sodium, 4 light type select, microprocessor circuit.
* Size : 185 x 78 x 38 mm.
LIGHT METER
Model : LX-1102
* Large LCD display with bar graph display.
* 40.00/400.0/4, 000/40, 000/400, 000 Lux.
* Lux, Foot-candle unit selection.
* Sensor meet C.I.E. spectrum, 2 filters.
* RS232, Hold, Record, Zero adjust.
4 in 1 METER
Model: LM-8100
* 4 function: Humidity/Temp. measurement, Anemometer/Temp. measurement, Light measurement Type K
Thermometer
* Humidity: 10 to 95 %RH, Temp. (oC/oF).
* Anemometer: 0.4 to 30 m/s, Temp. (oC/oF).
* Light : auto range, 0 to 20, 000 Lux, 0 to 1, 860 Ft-cd.
* Type K Thermometer: -100 to 1300 oC, oC/oF.
* Data hold, Record (Max., Min.).
* RS232/USB computer interface.
* Optional type K Temp. probe: TP-01, TP-02A, TP-03, TP-04.
* Compact housing, easy carryout.
Models : 2250-Hz AUTO, 1000A AC, Auto Ranging, 3 Digit 3999 Counts, Data Hold, Frequency, Duty Cycle, APO.
Specification:
AC Current | 40A, 400A, 1000A |
AC Voltage | 1000A AC max. for 1 min. 4V, 40V, 400V, 750V (Auto) |
DC Voltage | 4V, 40V, 400V, 1000V (Auto) |
Resistance | 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ (Auto Ranging) |
Frequency Ranges | 10.00Hz, 50.00Hz, 500.0Hz, 5.000KHz, 50.00KHz, 500.0KHz (Auto) |
% Duty Cycle | 1% to 90% (Auto) |
Sp. Functions | Data Hold, Audible Continuity, Diode Test, APO |
Jaw Opening | Cable Dia. 55mm (max.) |
Models : 3690Auto, Auto/Manual 600A AC/DC, Frequency 3¾ Digit 3999 Counts, Data Hold, Audible Continuity, D Zero Button (for DCA), APO
AC Current | 400A, 600A |
AC Voltage | 4V, 40V, 400V, 600V |
DC Current | 400A, 600A |
DC Voltage | 400mV, 4V, 40V, 400V, 600V |
Resistance | 400Ω, 4KΩ, 40KΩ, 400KΩ, 4MΩ, 40MΩ |
Frequency | 100Hz, 1KHz, 10KHz,100KHz, 500KHz |
Sp. Functions | Data Hold, Audible Continuity, Diode Test, APO |
Jaw Opening | Cable Dia. 30mm max. |
Features:
Specification:
Battery Charging Time | 10 hrs |
AC Adapter | Input 220 V AC, Output DC 12 V/1 ~ 3A |
Weight | 1160 gms Battery Included (approx.) |
Accessories | Users Manual x 1
Software Manual x 1 Software CD x 1 1.2V AA Rechargeable Battery x 8 for 7002, 11.1V(Rechargeable Lithium Battery x 1 for 7272 1 set of Kelwin Clips (2 clips, 5A max.) |
Dimensions | 257 x 155 x 57 mm(approx.) |
Environment | 0 ºC ~ 50 ºC º ≤ 85% RH (Operation) -20 ºC ~ 60 ºC º ≤ 75% RH |
Build ATC sensor, economic type
PEN pH METER
Model : PH-223
* 0 to 14.00 pH.
* ATC (auto temperature compensation).
* Auto calibration for pH 4, pH 7 or pH 10.
* Meter with pH electrode, all in one.
* IP-67, water proof.
* Easy replacement for the pH electrode.
* Pen type, easy operation carry out.
* pH 4, pH 7 standard solution are included.
Mini PH METER
Model : PH-207HA
* 0 to 14 pH x 0.01 pH.
* -P circuit, LCD with annunciator.
* Max., Min., Memory recall button.
* pH, mV, Temp., manual Temp. Adj. or ATC.
* DC 1.5V battery (UM-4, AA) x 4, long life.
* Pen type easy carryout.
PH METER
Model : PH-208
* pH : 0 to 14.00 pH, 1999 mV.
* mV function for ORP electrode.
* Manual temperature compensation.
* ATC via optional Temp. probe (TP-07).
* Easy pH calibration procedures.
* RS232, Hold, Record (Max., Min.), oC/oF.
* Size : 195 x 68 x 30 mm.
PH-mV-TEMP. METER
Model : PH-206
* pH : 0 to 14.00 pH, mV : -1999 to 1999 mV, Temp. : 0 to 100.0 oC.
* Manual/Auto Temp. compensation.
* Size : 160 x 80 x 35 mm.
Model : SL-4010
* Frequency & time weighting meet IEC 61672 class 2.
* 35 to 130 dB, 3 ranges, Data hold.
* A frequency weighting, Fast time weighting.
* Size : 250 x 83 x 32 mm.
Model : SL-4012
* 30 130 dB, Auto range, Manual range.
* Frequency & time weighting meet IEC 61672 class 2.
* A & C frequency weighting.
* Fast / Slow time weighting, Data hold.
* Peak hold, Memory (max., min.).
* AC output & RS-232.
* Size : 268 x 68 x 29 mm.
Model : SL-4022
* Frequency & time weighting meet IEC 61672 class 1.
* 30 to 130 dB, 3 ranges, Max. hold, Data hold.
* A/C frequency weighting, F/S time weighting.* AC output, Internal 94 dB calibration.
* Professional sound level meter.
* Size : 260 x 87 x 36 mm.
Model : SL-4030
* Main specification meet IEC 61672 class 2.
* A, C weighting, Max. hold, fast/slow time weighting, AC/DC output.
* Range : 3 ranges, 30 to 130 dB.
* Mini pocket size.* DC 9V battery (006P) or DC 9V adapter in.
Model : SL-4011
* Frequency & time weighting meet IEC 61672 class 2.
* A, C weighting, Max., Data hold, fast/slow time weighting.
* AC/DC output, Max. Hold.
* Reset button for Max. hold.
* Range : 3 ranges, 35 to 130 dB.
* Size : 250 x 83 x 32 mm
Model : SL-4001
* Frequency & time weighting meet IEC 61672 class 2.
* A, C weighting, Max. hold, Data hold, fast/slow time weighting, AC/DC output.
* Range : 3 ranges, 30 to 130 dB.
* Size : 245 x 80 x 35 mm.
We are instrumental in distributing and trading Screen Tension Meter, which is exceptional in performance. It is used for measuring the hardness of nylon, polyester and steel mesh. The offered screen tension meter is compact in size, light in weight and portable. It is user friendly and provides with accurate measurements within a short period of time. We are known for the timely delivery of orders as well. Features:
Range Available: 5-50 N / cm Portable Screen tension meter (Serimeter) for:
We are instrumental in distributing and trading Tension Meter. The offered tension meter is used for measuring pressure fluctuations in petroleum plants and oil refineries. It is portable, durable and accurate in measurements. This device is available in various ranges owing to our diligent procuring agents and our client centered approaches. We are well equipped for handling bulk orders.
Features:
Rang Available: 1-10 , 2-15, 3-30 , 5-50, 10-100, 15-150, 25-250 g
We are distributor & trader of Analog Bore Gauge. Analog Bore Gauge are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.
Features:
We are Leading supplier & trader of Holematic Pistol Grip Bore Gauge.
Bore gauge incorporates an ergonomic pistol grip handle with an advancedtrigger action, giving the user the advantages of both speed of operation and a constant measuringpressure. The clear digital display, superior IP65 electronics and application range of 2 to 300mm ensuresease of use and assured accuracy.
The XT Holematic pistol grip range of bore gauges can be supplied as individual instruments or in complete
sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and
UKAS certification of both measuring head and setting ring as standard.
Features
IP65 Electronics
Simple 2-button operation
Large easy-to-read swivel display
3 preset memories
RS-232C output
Self-centring heads
Constant measuring pressure
Fast, accurate measurement
Range 2-300mm (0.080-12)
2-6mm 2 point / 6-300mm 3 point measurement
Resolution 0.001mm (0.00005)
Tungsten carbide measuring faces on all 3-point heads from 12.5mm
Blind bore measurement from 2-6mm and above 12.5mm (0.500)
Extensions available above 6mm
Setting rings included with individual instrumentsand sets
UKAS certificates supplied as standard with all setting rings
UKAS certificates supplied as standard with all pistol grip gauges
Serial number on all gauges and measuring heads
Heads with special anvils available to suit specific customerrequirements (e.g. threads, grooves, 2-point, spherical, splines etc)
Bore gauges manufactured according to DIN 863
Supplied in fitted case
We are supplier & Trader of Large Diameter 3-point Bore Gauge.
Features:
large diameter 3-point bore-gauge has been designed specifically for the measurement of internaldiameters between 300 and 500mm. The newly designed constant-force digital readout ensures that the measuringpressure remains constant throughout the measurement whilst radiussed measuring anvils provide optimum centralisationin the part. Anvil sets are supplied in 25mm steps (300-325, 325-350 etc) and each set has been manufactured to the exacttoleranced size. The 300-325mm anvils are the master reference set and are used for setting the gauge in the setting ring.The other anvil sets are then fitted as required without further re-setting. This means that only one 300mm setting ring isrequired to set the gauge for all diameters in the full 300-500mm range of the instrument.
Technical Specifications:
Measuring range: 300-500mm
New constant-force digital readout
Single 300mm setting ring covers full range
Radiussed anvils of tool-steel for optimum centering
Accuracy: 15m
Repeatability: 3m
IP65 electronics
RS-232 output
Resolution 0.01/0.001mm. Metric/inch switchable
Fast accurate measurement
Extensions available for deeper bores
UKAS certificate with setting ring
Certificate of conformity with bore gauge
Supplied in fitted case
We are distributor & trader of Adjustable Micrometer Spirit Level.
Features:
Adjustable Micrometer Spirit Level Standard version with prismatic measuring base of hardened steel, finely rectified, 150 mm long, without magnets, according to Standards DIN877 + DIN2276/1 Main scale on micrometer: 1 division = 0.02 mm/m The prismatic bases are suitable for shaft diameters 19 120 mm The main vial has a sensitivity of 0.02 mm/m Precision: 0.02 mm/m Transversal vial with a sensitivity of 2-5 mm/m for easier handling of the level when measuring on horizontal shafts Packed in a wooden storage case |
Tubular Spirit Level Execution: The TUBULAR SPIRIT LEVEL 59 provides a flat measuring base without recession in the middle part, according to Standards DIN877 + DIN2276/1 The vial is firmly sealed in a stable steel tube, outside gun-blued The TUBULAR SPIRIT LEVEL 59 is available in various lengths and sensitivi-ties As an option the TUBULAR SPIRIT LEVEL 59 in lengths 80 and 150 mm can be obtained with 2 through holes for mounting on a measuring object |
We are distributor & exporter of Circular Spirit Level. These are available in various specifications.
We are supplier & trader of nivelSWISS (Niveltronic).
Features:-
We are supplier & trader of Tubular Spirit Level.
Features:-
The TUBULAR SPIRIT LEVEL 59 provides a flat measuring base withoutrecession in the middle part, according to Standards DIN877+DIN2276/1
The vial is firmly sealed in a stable steel tube, outside gun-blued
The TUBULAR SPIRIT LEVEL 59 is available in various lengths and sensitivi-ties
We are supplier & trader of Universal Angle Spirit Level.
Features:-
Angular spirit level with removable tubular spirit level with a prismatic verticalmeasuring base of 150 mm, according to Standards DIN877 + DIN2276/1
The prismatic base is suitable for shaft diameters 19 108 mm
The vial has a sensitivity of 0.50 mm/m
Precision: 0.50 mm/m
Transversal vial with a sensitivity of 2-5 mm/m for easier handling of the levelwhen measuring in the vertical
Packed in a wooden storage case