BOMBAY TOOLS CENTRE

Broadway, Chennai, Tamil Nadu

We are one of the well-known trader and distributor of Push Pull Gauge.The offered push pull gauge is a mechanical-force gauge, which is commonly used for the basic tension and compression testing jobs. Our offered push pull gauge is made from high-grade raw materials, sourced from very reliable vendors in the market.

Features:

• High mechanical strength
• Hard wearing
• Longer service life

We are Leading distributor & Trader of Blind Holes Bore Gauge in chennail. Client can avail these from us in different specifications.

Applications:

• Bore Guages for blind holes can measure ID at position close to the bottom of blind holes.

Technical Specifications:

• Accuracy: 5m / .0002
• Indication stability: 2m / .00008
• Graduation: 0.01mm, 0.001mm, .0005 or .0001

We are ditributor & trader of Bore Gauges Standard Type. We offers a complete selection of Bore Gages, all of them with interchangeable anvils and necessary accessories to perform close tolerance ID measurements.

Applications:

• Most popular Bore Gages.
• Carbide-tipped contact points for durability.
• The dial indicator is fully protected by a rugged cover.
• Optional extension rods can be attached for measuring deep holes.

Technical Specification:

• Accuracy: 5m / .0002
• Indication stability: 2m / .00008
• Graduation: 0.01mm, 0.001mm, .0005 or .0001

We are Leading supplier & trader ofBore Gages with Micrometer head.

Specifications:

• Interchangeable anvil is attached to a micrometer head for accurate dimensional setting.
• Wide measuring range with sub-anvils.
• Carbide ball contact point for durability.
• Extension rods (optional) can be attached for measuring deep holes.
• Optional Setting Rings offer the best method of zero-setting Bore Gages.

Technical Specifications:

• Accuracy:2m/.0008
• Indication stability:1m/.00004
• Graduation: 0.01mm, 0.001mm, .0005 or .0001

We are Leading supplier & trader ofDigimatic Bore Gauge.

Specifications:

• The minimum value holding function provides the easy detection of hole diameter.
• Up to three sets of master value and upper/lower tolerance value can be memorized.
• An analog bar indicator is integrated to enhance the intuition in reading.
• GO/NG judgment is performed by setting the upper and lower tolerances.
• Up to four rods (250mm or 500mm) can be used.

Technical Specifications:

• Accuracy: Wide Range: 0.003mm/.00012
• Narrow Range:0.002mm/.00008 Resolution:.00005/0.001mm
• Display:LCD
• Battery: SR44 (1 pc.)(938882)
• Battery life:Approx.9 months for normal use
• Dust/Water protection level: Conforming to IP53

Functions

Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only),

We are Leading distributor and trader of Extra Small Holes Bore Gauge.

Specifications:

• These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is shown on the dial indicator.

Technical Specification:

• Accuracy:4m/.00016
• Indication stability:2m/.00008
• Graduation:0.01mm, 0.001mm, .0005 or.00001

We are leading supplier & Exoprter of Bore Gages with Short Leg.

Specifications:

• Compact and lightweight because of the short length below the grip.
• Carbide-tipped contact point for durability.

Technical Specifications:

• Accuracy: 5m / .0002
• Indication stability: 2m / .00008
• Graduation: 0.01mm, 0.001mm, .0005 or .0001

We are Leading supplier & trader ofMinitest 650in chennai.

Rugged coating thickness gauge

for any non-magnetic coatings on steel such as paint, enamel, chrome, zinc, etc.

for any insulating coatings on non-ferrous metals such as paint, anodising, ceramics on aluminium, copper, zinc die-cast, brass, etc.

Ram- and impact-protected through rubber rimmed casing

Sensor with newly developed

wear-resistant carbide metal tip

Designed for durability and highprecision, MiniTest 650 is the ideal tool for any measuring task in the finishing industry. The rugged and easy-to-handle thickness gauge combines extended mechanical life on the one hand and high accuracy on the other hand to meet the requirements of any professional user in the shipbuilding, automotive, bridge building, construction or other industry.

Range Available

Model 650 F (steel) 0 3000 m / 120 mils

Model 650 N (non-ferrous metal) 0 2000 m / 80 mils

Model 650 FN (dual sensor) 0 2000 m / 80 mils

We are Leading supplier & trader ofMinitest 70Fin chennai.

Versatile coating thickness gauges

for fast and precise measurements of

non-magnetic coatings on steel 03000 m

insulating coatings on non-ferrous metals 02500 m

automatic identification of the substrate material

built-in sensor

proven measuring methods

statistics function

Range Available for Ferrous Type is 0-3mm/120mils

Range Available for Ferrous/NonFerrous Type

Ferrous: 0-3mm/120mils

Non Ferrous: 0-2.5mm/100mils

We are Leading distributor & trader of Pen Test Thickness Gauges in chennai. Range Available is 50-500 m and 2-20 mils.

We are Leading supplier & trader of Mikro Test Thickness Gauges in chennai.

A coating thickness gauge for quick, precise and non-destructive measurement of:

• electroplating
• nickel coatings
• phosphating
• paint
• plastic
• enamel etc.

Measurement at any angle & Fully automatic:

The MikroTest has been the most widely used coating thickness gauge in the world over the last 40 years. International patents and our production know-how ensure that the gauge has the highest technical standards of all analogue magnetic coating thickness gauges. Range Available are 100 & 1000

We are distributor & trader of Digimatic Depth Gauge.

Features:

• Absolute Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery.
• Wide probing range is available with the supplied extension rod.
• Bottom surface of the base is hardened, ground and lapped for highest degree of flatness.
• With SPC data output.

We are Leading supplier & trader of Tire Thread Depth Gage.

Features:

• ABSOLUTE Digimatic Tread Depth Gage can keep track of the origin point once set for the entire life of the battery. (Series 571)
• Specially designed to measure tire tread depth.
• Plastic construction for light-weight use. (Series 700)
• With SPC data output. (Series 571)

We are leading distributor & trader Vernier Depth Gauge.

Features:

• Absolute Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery.
• Base and measuring faces are hardened and micro-lapped.
• Optional wider extension base are available. (up to 450mm range models)

We are premium supplier & trader of Dial Depth Gauge.

Features:-

• The end of the main scale is hook-shaped to allow depth and thickness measurements of a projected portion orlip in a hole, in addition to standard depth measurement
• With fine adjustment models are available.
• Optional wider extension base are available.

We are distributor & trader of Dial Height Gauge.

Features:

• Easy and error-free reading with both up and down digital counters as well as a dial.
• Provided with a feed wheel for easy coarse feeding.
• Carbide-tipped scriber is provided.
• The counters and dial can be re-zeroed at any scriber position.

Technical Data:

• Accuracy: Refer to the list of specifications.Dial reading: 0.01mm or .001

Standard Scriber Provided:

• Metric models: Carbide-tipped scriber (07GZA000) and scriber clamp (05GZA033)
• Inch/Metric models: Carbide-tipped scriber (900258) and scriber clamp (901385)

We are distributor & trader of Digimatic Height Gauge.

Features:

• Easy-to-use standard type.
• Carbide-tipped scriber is provided.
• Double-column structure ensures high measuring accuracy.
• With SPC data output.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.01mm or .0005/0.01mm
• Display: LCD, 7-digit charter height 11mm
• Max. response speed: 500mm/s
• Battery: SR44(1pc.), 938882
• Battery life: Approx. 2000 hours under normal use

Functions:

• Zero-setting, ABS/INC switching, Two presets, Probe tip diameter compensation-/+ switching,
• Power ON/OFF, Data hold,
• inch/mm conversion (on inch/mm models only)
• Alarm: Low voltage, Counting value composition error

Standard Scriber Provided:

• Metric models: Carbide-tipped scriber (07GZA000) and scriber clamp (05GZA033)
• Inch/Metric models: Carbide-tipped scriber (07GZA000) and scriber clamp (05GZA033)
• and scriber clamp901385)

We are distributor & trader of Digital Bore Gauge. Their internal micrometers give the operator the advantage of traditional quality ratchet gauges allied to advanced IP65 electronics. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate users most awkward measuring problems.Measuring heads for threads, splines slots, grooves, deep-holes and many more applications are available on request.

The Bowers XT range of internal micrometers can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of both measuring head and setting ring as standard.

Features:

• IP65 Electronics
• Simple 2-button operation
• Large easy-to-read display
• 3 preset memories
• RS-232C output
• Range 2 300 mm (0.080-12)
• 2-6mm 2 point / 6-300mm 3 point measurement
• Resolution 0.001mm / 0.00005
• Tungsten carbide measuring faces on all 3-point heads from 12.5mm
• Blind bore measurement from 2mm 6mm and above 12.5 mm (0.500)Extensions available above 6mm
• Ratchet stop to ensure consistent measurement
• Setting rings included with individual instruments and sets
• UKAS certificates supplied as standard with all setting rings
• UKAS certificates supplied as standard with all gauges
• Serial number on all digital readouts and measuring heads
• Heads with special anvils available to suit specific customer requirements (e.g. threads, grooves, 2-point, spherical, splines etc)
• Bore gauges manufactured

We are leading distributor & trader of Digital Push Pull Gauges.

We are distributor & trader of Feeler Gauge.

Features:

• Metric thickness gages are available with tapered leaves.
• Each leaf is marked with its thickness.
• Each leaf is detachable if necessary.

We are distributor & trader of Pitch Gauge.

Features:

• Thread pitch size is stamped on each gage.
• Metric, Unified, and Whitworth screw pitch gages.

We are supplier & trader of Radius Gage.

Features:-

• Radius size is stamped on each gage.
• Both concave and convex radius gages become a pair.
• With a locking clamp.

We are one of the well-known trader and distributor of Slip Gauge. The offered slip gauge is widely used in the measurement jobs. Our distributed slip gauge is made from superior grade raw materials, sourced from very trusted vendors in the market. The offered slip gauge is known for high accuracy and precision. Our offered slip gauge is available at cost effective market rates.

Features:

• Accurate readings
• Complete trueness in measurement
• Longer service life

We are supplier & trader ofSurface Profile Gauge.

The Analog Surface Profile Gauge will allow the peak to valley height of blast-cleaned surfaces to be accurately measured in accordance with the ASTM D-4417 Method B standard. The gauge is important tool in assessment of degree surface preparation or surface cleanliness before painting.

The gauge is initially set to zero with the glass zero plate. The needle touches the glass plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height. A number of measurements can be made and the average taken.

In addition the gauge can also be used to measure the effects of corrosion, i.e. pitting and cavity depth etc.

Supplied in Carrying Case with Glass Zero Plate

We are supplier & trader ofTestex Snap gauge.

The Testex Snap Gauge is used for the measurement of the surface profile after blasting when taken with Testex Tape / Replica Tape / Press-O-Film.

Testex Tape or Press O Film offers a simple and very accurate method of measuring blasted profiles. It can produce virtually exact replicas of the blasted surface profile, which can be measured using a snap gauge.

Hand Held simple operation. Place the Testex film firmly on the blasted surface, apply moderate pressure with the burnishing tool, the replica has now been taken and can be measured using the textex snap gage. Highly useful tool for measurements and used for pipeline & coating inspection.

Complies with ASTM, NACE and SSPC methods of measurement.

The Press-O-Film snap gauge can also be used as a micrometer for checking calibration test pieces and also thickness of flakes of paint.

Gauge has resolution 0.001mm/0.002mm (1m/2m )

Supplied with calibration certificate

We are supplier & trader of Adjustable Snap Gauges which are manufactured based on relevant IS specification, from 0-150mm. Body of gauge is graded cast iron. Block anvils & adjustable anvils are manufactured from graded steel. Various steps of range are from 0-6 mm, 6mm 13 mm, 13 mm 19 mm etc.

All gauges are manufactured as per accuracy specified in IS 7606-1982.

Technical Specifications:-

> Gauge available from 0-300mm

We are supplier & trader of Air Plug Gauge.

Features:-

• Quick and easy checking of bore size, taper & Ovality.
• With extensions to check deeper bores.
• Can be supplied to check though or blind bores.
• Can be supplied with multiple jets.
• Can be supplied specially to suit components.
• Can be supplied with Tungsten Carbide wear pads on request.

We are distributor & trader of Carbide Plain Plug Gauges.

Technical Specifications:

• Gauge available from 8-125mm

We are supplier & trader of Crankshaft Alignment Gauges.

• Crankshaft Gauge measures the Web deflection of a Crankshaft.Excessive web deflection is dangerous for the engine. The Cause may be faulty or damaged Crankshaft, damaged bearing, poor bearing alignment, excessive bearing clearance, or slackness, faulty flanging to transmission, flywheel or vee belt pulley etc.
• The BAKER Crankshaft Gauge is developed to identify & avoid the above problems.
• The Gauge covers web-to-web distance of 60-600 mm.
• The set is supplied in a sleek wooden box.

We are one of the major traders and distributors of a vast assemblage ofThread Plug Gauges that can be availed in several specifications. Greatly demanded for their reliable performance and robust construction, these thread plug gauges are quite popular in the industry. These high functionality gauges are tested for their flawlessness before being delivered to the customers.

Features:

• Intricately designed
• Reliable
• Safe to use

Range Available:

• Gauge available from 0.5 mm to 350 mm
• Gauge available from 1/16 inch to 10 inch

We are one of the leading traders and distributors of a vast range ofThread Ring Gauges that are provided in multiple ranges to meet the varied client needs. These adjustable gauges are manufactured from steel, machined & precision lapped and then inspected in each thread element. The offered range is vastly applauded for its reliable performance and accurate measurement. Features:

• Intricately designed
• Reliable
• Tensile strength

Range Available:

• Gauge available from 0.5 mm to 340 mm
• Gauge available from 1/16 inch to 8 inch

We are supplier & trader of Torque Gauges.

For measurement of micro torque and calibration of torque tools.

• Two Body Sizes: ATG smaller and BTG larger coodinate with torque ranges
• Accuracy +/-2% of indicated value
• Side and Top Memory Pointers (Smallest ATG models do not have memory ptrs due to very low torque)
• Three fingered keyless threaded chuck (Aluminum version standard)
  • ATG plastic (#322) or metal chuck (#321) available as optional accessory
• Bi-Directional loading
• 270 degrees of rotation with stopper to prevent over-loading
• Includes plastic storage case and certificate of calibration

We are one among the prominent traders and distributors of premium quality Adjustable Fillet Weld Gauge. Resistant to corrosion and abrasion, it is highly popular in the market. Widely used for measuring fillet weld and throat weld thickness, the offered product is highly demanded. Being a client-centric organization, we ensure an optimum range of fillet weld gauges for our esteemed clients.

We are supplier & trader ofBridge Cam Gauge.

Features:-

The following measurements are possible in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, Weld Throat Size, and more.

It allows measuring of:

Height of flat weld

Height of fillet weld bead

Thickness of fillet weld

Bevel angle of weld measurement

Undercut depth of weld seam

Vertical misalignment

o meet the rising demands and requirements of our clients, we come with best quality Digital Welding Gauge. Made using high-grade stainless steel at the vendors end, the offered product is assured of surpassing quality. Owing to its LCD digital display and accurate results, the whole range of high quality digital welding gauges offered by us is widely praised in the market.

Specifications:

• Resolution: 0.01 mm /0.0005
• With angle gages: 60, 70, 80 and 90
• Made of stainless steel
• Range: 10mm/0.4
• Range: 0-20mm / 0.8

Enriched with a vast industry experience, we are capable of trading and distributing premium quality Fillet Weld Gauge. Resistant to corrosion, it is widely considered among our client-base spread nationwide. Conceding to the varied requirements and demands of our clients, we make the offered range of high quality gauges offered by us at competitive prices.

Features:

• Highly durable
• Corrosion resistant
• Abrasion resistant

We are supplier & trader of High Low Gauge for multi purpose.

Features:-It allows measuring of:Height of flat weldHeight of fillet weld beadInternal and external misalignmentWeld measurements wall thickness.

We are supplier & trader of High Low Single Purpose Gauge.

Features:-

It allows measuring of misalignment and gap size. Millimeters and inches scales available.

We specialize in the trading and distributing of supreme quality Pipe Pit Gauge. The arm of the offered product can be locked in place at any dimension. The offered product is easy to use. Known for its long life span and perfect finish, the whole range of utmost quality pipe pit gauges offered by us has amassed immense appreciations among the clients.

Features:

• Rust free
• Abrasion resistant
• Long lasting

Range Available:

• Range is 0 to 1/2 in 1/64 & .020 Increments

Details:

• Arm Can be Locked in Place at Any Dimension
• Available in Standard or Metric

We are engrossed in the trading and distributing of utmost quality Pit Gauge. Extensively used for checking undercuts and pits, it has fetched high demands in the market. Known for its anti-corrosive properties and flawless finish, the entire range of high quality pit gauges offered by us has been a preferred choice of the client-base we have accomplished to gain.

Features:

• Reliable
• Chemical resistant
• Dimensionally correct

Size: 0-2mm by 0.2mm

We specialize in the trading and distributing of best quality Pocket Bridge Cam Gauge. The offered product is widely used for checking the depth of undercut and pitting. Accrediting to its durability, flawless finish and easy usage the entire range of high quality pocket bridge cam gauge has amassed words of intense praise among the huge client-base we have.

Specifications:

• Angle of preparation: 0 to 60 degree
• Depth of undercut by: 1/32
• Depth of pitting by: 1/32
• Fillet weld throat size: 5mm

We are a conspicuous name that is engrossed in the trading and distributing of supreme quality Pocket Fillet Weld Gauge. Light in weight, the offered product is easy to carry. Made using premium quality stainless steel procured at the vendors end, the whole range of high quality fillet weld gauges offered by us is highly appreciated among the customers we have.

Features:

• Intricately designed
• Reliable
• Chemical resistant

We are listed at the acme for trading and distributing best quality Skew T Fillet Weld Gauge. Resistant to breakage, it is widely regarded among the customers we have. The offered product is made under the strict vigilance of experts and professionals at the vendors end. Accrediting to its durability and accurate measurement, the offered product is highly regarded among the clients we have.

Features:

• Abrasion resistant
• Efficient
• Different finishes

We are a highly acclaimed name that is engaged in the trading and distributing of premium quality Taper Gauge. Widely used for measuring gap size, it is highly renowned in the market. Committed to deliver quality products to the clients our team of quality controllers checks the entire range of products to be offered on various parameters and hence ensure a defect-free range for customers.

Features:

• Intricately designed
• Reliable
• Chemical resistant

We are supplier & trader ofV Wac Gauge Metric.

Features:-

It allows measuring of:

Height of flat weld

Height of fillet weld bead

Undercut depth of weld seam

With the lapse of time, we gained experience and became proficient in the trading and distributing of superlative quality Weld Gauge.The offered product is widely known for its long lasting life. Our team of quality controllers checks the entire range of products to be offered on various parameters and hence assure a defect-free range for the clients.

Features:

• Unsurpassable performance
• Low maintenance
• Dimensionally correct

We are supplier & trader ofWTPS Weld Gauge.

Features:-

Measure Undercut. Undercut will be No morethan .010 deep when the weld is transverse tothe primary stress in the part that is undercut.

Gauge set comes with a precision groundcalibration block, ground to .0005 tolerance foraccuracy.