Our Products
We are listed at the apex in the list of the well-reputed Multi-Ply Fabric Conveyor Belt Manufacturers in India. The Multi-Ply Conveyor Belts offered by us is commonly known as Nylon Conveyor Belt, EP Conveyor Belt and Cotton Conveyor Belt. Moreover, customers are eased with the availability of the Fabric Reinforced Multiple Ply Conveyor Belt in standards like GB7984/GB10822, DIN 22102, AS 1332 and JISK6322. EP BELT :- under condition of middle/long distance, heavy loading capacity, high speedconveying, good flexing capacity, troughable, heat resistant, low lad elongation. NN BELT :- under condition of middle/ long distance.heavy loading capacity, high speed, strong lash and high vulnerability. CC BELT :- suitable for middle/ short distance conveying.
We are listed at the apex in the list of the well-reputed Bucket Elevator Belt Exporters from India. The Bucket Elevator Conveyor Belt offered by us occupies little earth coverage, no pollution, great conveying capacity, suitable for conveying bulk material etc. The same have made the Belt Bucket Elevator ideal for conveying material vertically, widely used in building, mining, chemical, light industry, Power station and grain etc. ConfigurationElevator-bucket belt is compossed of rubber belt and elevator-bucket.The core of belt has two kinds of strcuturds tabric core and steal cord, which can be used for vertical elevated conveying, The requirements need the belt with high strength and low elongation, thus the elevatoe-bucket belt uses steel cors or polyester(polyester fiber)canvas as strength ply of belt. Application :- Suitable for conveying material vertically, widely used in building. mining. chemical.lightindustry, Power station and grain etc, field. Featrue :- Little earth coverage, no pollution, great conveying capacity, suitable for conveying bulk material.
Belt Type | Belt Type | Fabric Type | Cover Thicknees (mm) Top Rubber | Cover Thicknees (mm) Bottom Rubber | Width Range(mm) |
---|---|---|---|---|---|
Belt type | Cotton canvas belt | CC-56 | 1.5 | 1.5 | 300-2200 |
Nylon belt | NN100-EP400 | 1.5 | 1.5 | 300-2200 | |
EP belt | EP100-EP400 | 3.0 | 3.0 | 300-2200 | |
Belt type | Cotton canvas belt | CC-56 | 4.5 | 4.5 | 300-2200 |
Nylon belt | NN100-NN400 | 4.5 | 4.5 | 300-2200 | |
EP belt | EP100-EP400 | 6.0 | 6.0 | 300-2200 | |
Steel cordconveyor belt | ST630-ST5000 | 6.0 | 6.0 | 300-2200 |
Corrugated sidewall conveyor belt is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space requirement, no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be designed into a set of complete transportation system according to application. FeatureCorrugated sidewall conveyor belt is one of the most effective ways of elevating materials in a confined space, the economy is achieved by single belt operation, wide range material can be handled, less space requirement, no transfer point, low maintenance and big capacity. Corrugated sidewall belt can be designed into a set of complete transportation system according to application. Base Belt Structure Four parts :- Top cover rubber;Bottom cover rubber; Reinforced core :- Cross rigid. Thickness of top cover rubber :- 3-6mm; Thickness of bottom cover rubber :- 1.5-4.5mm. Belt core :- Cotton, Nylon, EP or Steel Cord The Width is the same as normal belt. The standard meets with GB/T7984-2001. Cleat
Base Belt Width (mm) | Sidewall Height (mm) | Cleat height H1 (mm) | BF(mm) | Br(mm) | R(mm) |
---|---|---|---|---|---|
300 | 40, 60, 80 | 35, 55, 75 | 25, 50 | 180, 120 | 35, 40 |
400 | 60, 80, 100 | 55, 75, 90 | 50 | 180 | 60 |
500 | 80, 100, 120 | 75, 90, 110 | 50 | 250 | 75 |
650 | 100, 120, 160 | 90, 110, 140 | 50, 75 | 350, 300 | 100 |
800 | 120, 160, 200 | 110, 140, 180 | 50, 75 | 460, 410 | 120 |
1000 | 160, 200, 240 | 140, 280, 220 | 75 | 550 | 150 |
1200 | 160, 200, 240, 300 | 140, 180, 220, 280 | 75, 105 | 690, 630 | 180 |
1400 | 200, 240, 300, 400 | 180, 220, 280, 360 | 75, 105 | 830, 770 | 210 |
1600 | 200, 240, 300, 400 | 180, 220, 280, 360 | 75, 105 | 970, 910 | 240 |
1800 | 240, 300, 400, 500 | 220, 280, 360, 460 | 75, 105, 125 | 1110, 1050, 1010 | 270 |
We are recognized as one of the prominent Patterned Conveyor Belt Exporters from India. The Chevron Conveyor Belts offered by us are designed to convey powdered, granulated and small lump material at the gradient of no more than 40° and packaged materials. Moreover, customers are eased with the availability of the Patterned Chevron Conveyor Belt in varied sizes and dimensions. Shape and characteristics :-On surface of the belt, there is chevron pattern higher than the belt body, the pattern may be either open-end or closed, Each kind of pattern includes three types of high, medium and low.
Our company is looked upon as one of the dependable Steel Cord Conveyor Belts Exporters from India. Various national as well as international clients are placing bulk orders for the Fire-Resistant Steel Cord Conveyor Belt due to the unmatched quality and unsurpassable performance in respective applications. Additionally, the Steel-Cord Reinforced Conveyor Belting is available in varied sixes and dimensions as per the specific requirements provided by the clients. Structure :- The belt core is comprised of longitudinally and evenly arranged non-spinning galvanized wire ropes and high adhesive core rubber, with the upper side and lower side covered with rubber layer. Features :- High tensile strength, long service life, short elongation under service, good groove formation property and good anti-flexure property, suitable for conveying materials across long distance, with large volume and high speed. Types :- According to structure: General type, Impact resistance and Rip resistance transverse type. According to application: besides General-used steel cord belt, there are some kinds of Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, High-grade type and etc.
Technical Data For Steel Cord Conveyor Belt According To DIN22131
ST1000 | ST1250 | ST1600 | ST2000 | ST2500 | ST3150 | ST3500 | ST4000 | ST4500 | ST5000 | ST5400 | |
---|---|---|---|---|---|---|---|---|---|---|---|
Longitudinal Tensile Strength (N/mm) | 1000 | 1250 | 1600 | 2000 | 2500 | 3150 | 3500 | 4000 | 4500 | 5000 | 5400 |
Steel diameter(mm) | 1.1 | 1.9 | 5.6 | 5.6 | 7.2 | 8.1 | 8.6 | 8.9 | 9.7 | 10.9 | 11.3 |
Space length Between Cords (mm) | 12 | 14 | 15 | 12 | 15 | 15 | 15 | 15 | 16 | 17 | 17 |
Min. Cover Thickness | 4 | 4 | 4 | 4 | 5 | 5.5 | 6 | 6.5 | 7 | 7.5 | 8 |
Width item (mm) | Steel cords Number | ||||||||||
500 | 39 | 34 | |||||||||
650 | 51 | 44 | 40 | 51 | 40 | 40 | 40 | 40 | 37 | ||
800 | 64 | 55 | 50 | 64 | 50 | 50 | 50 | 50 | 46 | 43 | 43 |
1000 | 81 | 69 | 64 | 81 | 64 | 64 | 64 | 64 | 59 | 55 | 55 |
1200 | 97 | 84 | 77 | 97 | 77 | 77 | 77 | 77 | 71 | 66 | 66 |
1400 | 114 | 98 | 90 | 114 | 90 | 90 | 90 | 90 | 84 | 78 | 78 |
1600 | 131 | 112 | 104 | 131 | 104 | 104 | 104 | 104 | 96 | 90 | 90 |
1800 | 147 | 127 | 117 | 147 | 117 | 117 | 117 | 117 | 109 | 102 | 102 |
2000 | 164 | 141 | 130 | 164 | 130 | 130 | 130 | 130 | 121 | 113 | 113 |
2200 | 181 | 155 | 144 | 181 | 144 | 144 | 144 | 144 | 134 | 125 | 125 |
2400 | 197 | 169 | 157 | 197 | 157 | 157 | 157 | 157 | 146 | 137 | 137 |
2600 | 214 | 184 | 170 | 214 | 170 | 170 | 170 | 170 | 159 | 149 | 149 |
2800 | 231 | 198 | 170 | 214 | 170 | 170 | 170 | 170 | 159 | 149 | 149 |
3000 | 247 | 212 | 197 | 247 | 197 | 197 | 197 | 197 | 184 | 172 | 172 |
3200 | 264 | 227 | 210 | 264 | 210 | 210 | 210 | 210 | 196 | 184 | 184 |
Min. Pulley Diameter | |||||||||||
Type | St1000 | St1250 | St1600 | St2000 | St2500 | St3150 | St3500 | St4000 | St4500 | St5000 | St5400 |
Min.Pulley Diameter | 63 | 0800 | 1000 | 1000 | 1250 | 1400 | 1500 | 1600 | 1600 | 1800 | 1800 |
Cover Rubber Property And Grades
Property indexes | ||||||||
---|---|---|---|---|---|---|---|---|
Test items | GB9770-2001 | DIN22131 | ||||||
D | H | L | P | W | X | Y | ||
Tensile strength | Mpa => | 18 | 25 | 20 | 14 | 18 | 25 | 20 |
Elongation at break | % => | 400 | 450 | 400 | 350 | 400 | 450 | 400 |
Aging test (70-7D) change rate of tensile strength |
% | -25, +25 | -25, +25 | -25, +25 | -25, +25 | -25, +25 | -25, +25 | -25, +25 |
Abrasion | =< | 90MM3 | 120MM3 | 150MM3 | 200MM3 | 90MM3 | 120MM3 | 150mm3 |
Type | According to Standards |
Ultra-high abrasion resistant | Shore abrasion≤70mm3 |
High abrasion resistant | AS1333 A,DIN22131 W, GB9770 |
Impact and abrasion resistant | DIN22131 X Y, AS1333 M N, JIS K6369 D H,GB/T9770 |
Heat resistant | ISO 4195,HG/T2297,GB/T20021 |
Flame resistant & Anti static general use | DIN 22131 K |
Flame resistant & Anti static for coal mine | MT 668, MT147, AS1333 |
Oil resistant | HG/T3714 |
Acid/alkali resistant | HG/T3782 |
Cold resistant | HG/T3647 |
Ozone resistant | RMA (ASTM D1171 |