Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

These components are extensively used in a vast range of diverse applications including automotive air-conditioning. They are manufactured in special high-end sponge compounds with very low specific gravity. Our ability to manufacture these highly specialised components in exceptionally low specific gravity, with high porosity on the inside without compromising on the external texture of the components that retains its desired smoothness, is one of our company's core strength and a rare capability.

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning.

Moulded rubber products including Grommets, Bellows, Buffers, Steering Column and other Boots, Wiring Harness components like Bellows, Isolators, Exhaust Hangers, Bumpers and a range of other similar components.Moulded Rubber Products for Automobiles and Industrial Uses. The range would include products like Dust Caps, Bellows, Rubber Housings, Exhaust Hangers, Rubber Bushes, Suspension Kits and the range of other products used in Automobiles. The industrial products would include BIS approved Rubber Rings for water, gas and oil pipelines.

The abrasion resistance parameters that are the key measures of quality of these components are tested in-house. The on-line flocking process is the key to attaining high abrasion resistance levels. The material used in these components like the compounds, flocking material and adhesive, all have to be of the best grade available worldwide to provide V

The most common and by far the most important application of the EPDM based sealing system in an automobile is the door seal (co-extruded profiles). These are dynamic seals which seals the door with the door flange firmly to avoid dust, water & air to leak inside the cabin. The same sealing system is also used in Deck lid sealing, bonnet sealing and similar other applications. The seals are also very important as far as aesthetics is concerned. It takes care of the door & Body flange panel variations and gives a smooth look from outside.

The most common and by far the most important application of the EPDM based sealing system in an automobile is the door seal (co-extruded profiles). These are dynamic seals which seals the door with the door flange firmly to avoid dust, water & air to leak inside the cabin. The same sealing system is also used in Deck lid sealing, bonnet sealing and similar other applications. The seals are also very important as far as aesthetics is concerned. It takes care of the door & Body flange panel variations and gives a smooth look from outside.

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other simil

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning applications, flame resistant EPDM profiles for railway, high TS-high EB specs. and similar other challenging parameters.

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning applications, flame resistant EPDM profiles for railway, high TS-high EB specs. and similar other challenging parameters.

The most common and by far the most important application of the EPDM based sealing system in an automobile is the door seal (co-extruded profiles). These are dynamic seals which seals the door with the door flange firmly to avoid dust, water & air to leak inside the cabin. The same sealing system is also used in Deck lid sealing, bonnet sealing and similar other applications. The seals are also very important as far as aesthetics is concerned. It takes care of the door & Body flange panel variations and gives a smooth look from outside. Functional parameters are easy fitment on the sash but high retention force after fitment and the desired level of force required in the closure of the door. The important design parameters like Compression load deflection force, insertion and retention force are the reflection of these factors.

These components, manufactured by our company, serve as sealing components with anti friction qualities for the smooth operation of windows. The abrasion resistance parameters that are the key measures of quality of these components are tested in-house. The on-line flocking process is the key to attaining high abrasion resistance levels. The material used in these components like the compounds, flocking material and adhesive, all have to be of the best grade

These components are extensively used in a vast range of diverse applications including automotive air-conditioning. They are manufactured in special high-end sponge compounds with very low specific gravity. Our ability to manufacture these highly specialised components in exceptionally low specific gravity, with high porosity on the inside without compromising on the external texture of the components that retains its desired smoothness, is one of our company's core strength and a rare capability.

The company serves the building and construction industry extensively. It manufactures EPDM profiles for this sector that serve as sealing components used between the glass and aluminium sections that from the core of the modern building industry. The zero tolerance levels maintained for conformance to dimensional specifications and perfect fitment have meant that our components used in combination with world class aluminium building systems provide excellent sealing from the external environment. The high level of ozone resistance of these profiles has meant that the perfect sealing qualities are sustained for a very long time. This is one of the primary reasons that the leading architectural aluminium building systems manufacturers in India and abroad use our products.

These components, manufactured by our company, are the most important components in the sealing systems used in all types of automobiles. The paramount importance of these components in the overall sealing system of an automobile has meant that high-end compounds are used to manufacture these components. Stringent testing is conducted for their ozone resistance and ageing properties. Conformance to cross section profile parameters with zero tolerance is undertaken on digital profile projectors aided by in-house auto-cad facilities. Our company manufactures these profiles that are used in buses and other similar vehicles. These are used between the window and the main body, the door and the main body and in similar other applications. These components are manufactured in superior EPDM compounds with high ozone resistance capabilities. The cross-section design of these components are tested to grip the glass and the automotive body to provide perfect sealing required, avoid any rattling noise and also to provide optimal protection form dust, water and other irritants in the external environment.

Moulded rubber products including Grommets, Bellows, Buffers, Steering Column and other Boots, Wiring Harness components like Bellows, Isolators, Exhaust Hangers, Bumpers and a range of other similar components.

Our Company manufactures a wide range of Moulded Rubber Products for Automobiles and Industrial Uses. The range would include products like Dust Caps, Bellows, Rubber Housings, Exhaust Hangers, Rubber Bushes, Suspension Kits and the range of other products used in Automobiles. The industrial products would include BIS approved Rubber Rings for water, gas and oil pipelines. We, as a company working on the guidelines of TS 16949:2002 try to ensure that we deliver the best quality product with zero tolerances and deviations in the overall quality of the product. The tool development is undertaken in-house and it is madesure that it has no dimensional deviations. All our products would comply with customer's stated physical test properties of the components. The company uses only the best possible raw materials available which are processed in our fully equipped modern plant. We take pride in the fact that we are an approved sub-contractor for the Indian Joint Venture of Stanley Electric Co., Japan (Lumax Industries Ltd.). Our American and European Clients would also approve of our commitment to quality & customer satisfaction.

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

Our Company manufactures a wide range of mountings used in Indian, American, European and Japanese automobiles. The range would include mountings used as Engine Mountings, Transmission Mountings and in some cases as Cabin Mountings. We, as a company working on the guidelines of TS 16949:2002 make our best effort to ensure that we meet and satisfy the needs and expectations of our customer. It is our understanding that these components are very critical to the smooth functioning of an automobile and have very demanding working environment. From the very first step of tool development to the final inspection of the finished rubber to metal bonded product, we ensure that there are zero tolerances and deviations in our processes.Rubber to Metal Bonded Components - Engine Mountings, Transmission Mountings, Cabin Mountings. We undertake tool development with ultra modern machines. Stringent standards are followed in metal preparation (phosphating, shot and sand blasting) and metal stamping. Rubber compounds for components are made with high quality raw materials so that the final product can perform under the demanding working environment of the components. Internationally acclaimed rubber to metal bonding agents are used for the manufacturing of the final product. Strict and 'Zero Tolerance' inspection is conducted before dispatching the components to the customer. We undertake development of customized rubber to metal bonded components as per Customer requirements. Our clients in North America, Europe and Australia would certify our commitment to quality and customer satisfaction.

Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning applications, flame resistant EPDM profiles for railway, high TS-high EB specs. and similar other challenging parameters.

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

We are offering co extruded rubber profiles, sponge cord, rubber products etc. Co-extruded rubber profiles, sponge cord, rubber products & flocked profiles extruded rubber products & sponge rubber profiles - bohra rubber offers world class co - extruded rubber profiles, flocked profiles, sponge cord & rubber profiles in india

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

These components are extensively used in a vast range of diverse applications including automotive air-conditioning. They are manufactured in special high-end sponge compounds with very low specific gravity. Our ability to manufacture these highly specialised components in exceptionally low specific gravity, with high porosity on the inside without compromising on the external texture of the components that retains its desired smoothness, is one of our company's core strength and a rare capability.

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning.

Moulded rubber products including Grommets, Bellows, Buffers, Steering Column and other Boots, Wiring Harness components like Bellows, Isolators, Exhaust Hangers, Bumpers and a range of other similar components.Moulded Rubber Products for Automobiles and Industrial Uses. The range would include products like Dust Caps, Bellows, Rubber Housings, Exhaust Hangers, Rubber Bushes, Suspension Kits and the range of other products used in Automobiles. The industrial products would include BIS approved Rubber Rings for water, gas and oil pipelines.

The abrasion resistance parameters that are the key measures of quality of these components are tested in-house. The on-line flocking process is the key to attaining high abrasion resistance levels. The material used in these components like the compounds, flocking material and adhesive, all have to be of the best grade available worldwide to provide V

The most common and by far the most important application of the EPDM based sealing system in an automobile is the door seal (co-extruded profiles). These are dynamic seals which seals the door with the door flange firmly to avoid dust, water & air to leak inside the cabin. The same sealing system is also used in Deck lid sealing, bonnet sealing and similar other applications. The seals are also very important as far as aesthetics is concerned. It takes care of the door & Body flange panel variations and gives a smooth look from outside.

The most common and by far the most important application of the EPDM based sealing system in an automobile is the door seal (co-extruded profiles). These are dynamic seals which seals the door with the door flange firmly to avoid dust, water & air to leak inside the cabin. The same sealing system is also used in Deck lid sealing, bonnet sealing and similar other applications. The seals are also very important as far as aesthetics is concerned. It takes care of the door & Body flange panel variations and gives a smooth look from outside.

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other simil

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning applications, flame resistant EPDM profiles for railway, high TS-high EB specs. and similar other challenging parameters.

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

Automotive Sealing Systems include Door Weatherstrips, Inner and Outer Beltstrips, Secondary Seals, Quarter Window Weatherstrips, Decklid Seals, Roof Rail weatherstrip, Glass Run weatherstrips, windshield Mouldings, Hood-to-cowl weatherstrips. Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning applications, flame resistant EPDM profiles for railway, high TS-high EB specs. and similar other challenging parameters.

The most common and by far the most important application of the EPDM based sealing system in an automobile is the door seal (co-extruded profiles). These are dynamic seals which seals the door with the door flange firmly to avoid dust, water & air to leak inside the cabin. The same sealing system is also used in Deck lid sealing, bonnet sealing and similar other applications. The seals are also very important as far as aesthetics is concerned. It takes care of the door & Body flange panel variations and gives a smooth look from outside. Functional parameters are easy fitment on the sash but high retention force after fitment and the desired level of force required in the closure of the door. The important design parameters like Compression load deflection force, insertion and retention force are the reflection of these factors.

These components, manufactured by our company, serve as sealing components with anti friction qualities for the smooth operation of windows. The abrasion resistance parameters that are the key measures of quality of these components are tested in-house. The on-line flocking process is the key to attaining high abrasion resistance levels. The material used in these components like the compounds, flocking material and adhesive, all have to be of the best grade

These components are extensively used in a vast range of diverse applications including automotive air-conditioning. They are manufactured in special high-end sponge compounds with very low specific gravity. Our ability to manufacture these highly specialised components in exceptionally low specific gravity, with high porosity on the inside without compromising on the external texture of the components that retains its desired smoothness, is one of our company's core strength and a rare capability.

The company serves the building and construction industry extensively. It manufactures EPDM profiles for this sector that serve as sealing components used between the glass and aluminium sections that from the core of the modern building industry. The zero tolerance levels maintained for conformance to dimensional specifications and perfect fitment have meant that our components used in combination with world class aluminium building systems provide excellent sealing from the external environment. The high level of ozone resistance of these profiles has meant that the perfect sealing qualities are sustained for a very long time. This is one of the primary reasons that the leading architectural aluminium building systems manufacturers in India and abroad use our products.

These components, manufactured by our company, are the most important components in the sealing systems used in all types of automobiles. The paramount importance of these components in the overall sealing system of an automobile has meant that high-end compounds are used to manufacture these components. Stringent testing is conducted for their ozone resistance and ageing properties. Conformance to cross section profile parameters with zero tolerance is undertaken on digital profile projectors aided by in-house auto-cad facilities. Our company manufactures these profiles that are used in buses and other similar vehicles. These are used between the window and the main body, the door and the main body and in similar other applications. These components are manufactured in superior EPDM compounds with high ozone resistance capabilities. The cross-section design of these components are tested to grip the glass and the automotive body to provide perfect sealing required, avoid any rattling noise and also to provide optimal protection form dust, water and other irritants in the external environment.

Moulded rubber products including Grommets, Bellows, Buffers, Steering Column and other Boots, Wiring Harness components like Bellows, Isolators, Exhaust Hangers, Bumpers and a range of other similar components.

Our Company manufactures a wide range of Moulded Rubber Products for Automobiles and Industrial Uses. The range would include products like Dust Caps, Bellows, Rubber Housings, Exhaust Hangers, Rubber Bushes, Suspension Kits and the range of other products used in Automobiles. The industrial products would include BIS approved Rubber Rings for water, gas and oil pipelines. We, as a company working on the guidelines of TS 16949:2002 try to ensure that we deliver the best quality product with zero tolerances and deviations in the overall quality of the product. The tool development is undertaken in-house and it is madesure that it has no dimensional deviations. All our products would comply with customer's stated physical test properties of the components. The company uses only the best possible raw materials available which are processed in our fully equipped modern plant. We take pride in the fact that we are an approved sub-contractor for the Indian Joint Venture of Stanley Electric Co., Japan (Lumax Industries Ltd.). Our American and European Clients would also approve of our commitment to quality & customer satisfaction.

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

Our Company manufactures a wide range of mountings used in Indian, American, European and Japanese automobiles. The range would include mountings used as Engine Mountings, Transmission Mountings and in some cases as Cabin Mountings. We, as a company working on the guidelines of TS 16949:2002 make our best effort to ensure that we meet and satisfy the needs and expectations of our customer. It is our understanding that these components are very critical to the smooth functioning of an automobile and have very demanding working environment. From the very first step of tool development to the final inspection of the finished rubber to metal bonded product, we ensure that there are zero tolerances and deviations in our processes.Rubber to Metal Bonded Components - Engine Mountings, Transmission Mountings, Cabin Mountings. We undertake tool development with ultra modern machines. Stringent standards are followed in metal preparation (phosphating, shot and sand blasting) and metal stamping. Rubber compounds for components are made with high quality raw materials so that the final product can perform under the demanding working environment of the components. Internationally acclaimed rubber to metal bonding agents are used for the manufacturing of the final product. Strict and 'Zero Tolerance' inspection is conducted before dispatching the components to the customer. We undertake development of customized rubber to metal bonded components as per Customer requirements. Our clients in North America, Europe and Australia would certify our commitment to quality and customer satisfaction.

Sealing systems for the construction industry and industrial applications and a range of other similar products also form part of the product profile. We also serve a niche segment of speciality profiles and other components with specifications such as ultra low specific gravity with smooth finish for HVAC and car airconditioning applications, flame resistant EPDM profiles for railway, high TS-high EB specs. and similar other challenging parameters.

Speciality assembled components include Engine Mounts, Transmission Mounts, Strut Mounts, Body and Cradle Mounts, Electric Panel Gaskets, Edge Protection Rubber Profiles and other components with similar industrial applications.

We are offering co extruded rubber profiles, sponge cord, rubber products etc. Co-extruded rubber profiles, sponge cord, rubber products & flocked profiles extruded rubber products & sponge rubber profiles - bohra rubber offers world class co - extruded rubber profiles, flocked profiles, sponge cord & rubber profiles in india