Our Products
Lab Stirrer
2 Products availableWe are leaders in the market for providing best range of Digital Altimeter, Antibiotic Zone Reader, COD Digester Digital Meter, Colony Digital Counters and Gloss Meter
Altimeter Range-(-500 to 9000 Meter).Barometer Range-(300 to 1100 hPa/mbar). Indoor Temp-(-10 to 60 Degree). Stop Watch-9Hr 59Min 59 Sec. Altitude History & Graphical Display of last 12 hoursBarometer Pressure History & Graphical Display Electronic barometer weather forecast
Suitable for measuring the diameter of inhibited zone within the range of 0 to 35mm with accuracy 0.2mm.
Digital COD Digester is suitable for COD method for monitoring wastewater influent and effluent, industrial process water, and more. This instrument is used by Pollution Control Labs. Outer cabinet made of mild steel duly coated. Double wall construction with insulation for minimum heat losses increases the efficiency of the system. Aluminium block with holes (Dimension 40mm dia X 80mm depth) is used to hold 15 nos. COD tubes. Aluminum Block is is heated to maintain temp. ip to 180*c. Solid state digital temp. Controller appropriate heater and insulation selection assure uniformity in all the samples. Selectable timer up to 120min with alarm is provided to set the digestion period (Refluxing). After digestion, analyse the sample with either colorimetric or titrimetric method.
Features:Temp. Range : Above and to 180C or higherResolution : 1C.Display : Digital 12 mm Red LEDControl : Digital Electronic Temp. Controller.Heater Rating : 750 Watts.Sensor : PT-100Timer : Selectable 15, 30, 45, 60, 90 or 120 min with alarmHole Size : 40 mm dia. x 80 mm depthGlass Tube : 38 mm. dia, 15 nos (5 x 3 rows)Sample Volume : 20 ml. eachDimension : 500 W x 270 D x 210 mm HModel No: 30 DHB 11, 30 DHB 12, 30 DHB 13
OPTIONAL ACCESSORIES | |
30 DHB 90 | COD Tubes x 15/10/6 nos----------------------EACH |
30 DHB 91 | Air condenser x 15/10/6 nos ------------------EACH |
30 DHB 92 | stand for Air condenser (For 15 tubes) |
30 DHB 93 | stand for COD tubes (For 15 tubes) |
30 DHB 94 | SS Bath for sample cooling after the test |
3 digital LED display Range 0-999 with 40 memory, hold and count correction facility. Data restored even after power failure.
Model No: LT-36
4 digital LED display Range 0-9999 with 40 memory, hold and count correction facility. Data restored even after power failure.
Model No: LT-37
ACCESSORIES ON REQUEST
a) Spare pen for Colony Counter
b) Lens Stand
Gloss of the surface is the ratio of light reflected from the sample to the light incident on it, when the angle of incidence and reflectance are equal numerically but opposite in sign i.e. Gloss is a measure of how well the surface functions as a mirror. Gloss increases as the angle of incidence increases. The unit is lightweight and with a inbuilt measuring head having integral read-out unit, with controls for setting the value of standards and holding the displayed value. In additional, there is an averaging facility to allow for surface variations.
Salient Features:
A truly portable Gloss Meter with a microcontroller base display and rechargeable batteries. The unit is small and lightweight thereby being totally portable and is available in 20 degree, 45 degree and 60 degree geometry A convenient HOLD facility allows the reading to be fixed even after removing the unit from the sample. To allow for surface variations, an averaging facility is provided of up to 20 readings.
Cat No. | Description |
078000 | Mini Gloss Meter 60 degree with standards |
079000 | Mini Gloss Meter 45 degree with standards |
080000 | Mini Gloss Meter 20 degree with standards |
Laminar Flow Bench- Clean Work Station for non dust working area. Unit comprising of HEPA / Pre dilter, Motor blowing assembly, Manometer, Tube Light. Horizontal & Vertical Models to meet requirement.
Vertical 2'x2'x2' |
Vertical 3'x2'x2' |
Vertical 4'x2'x2' |
Horizontal 2'x2'x2' |
Horizontal 3'x2'x2' |
Horizontal 4'x2'x2' |
Optional Accessories for Horizontal Model Size |
---|
Front Acrylic Door |
Front Door of Polycarbonate |
Side Polycarbonate Panel |
LPG/vacuum cock |
Minipleat HEPA |
Magnehelic Gauge |
We are offering lux meter, which are used for timed mean calculation or multi-point. Our lux meter are easy to hold, being compact and light weight, this lux meter is reliable and have durable finish standard.
Measuring Range :
0 - 50, 000 Lux ( LU-101 )
0 - 2, 00, 000 Lux ( LU-101A )
Model No: LX-101, LX-101A
Measuring Range:
0.1 - 200 Lux / 2000 Lux / 20, 000 Lux / 200, 000 Lux
Foot Candle : 0 to 20000Fc
Model No: LX-103
Features
3 3/4 Digital multimeter
4000 Counts with bar graph 61 Segments
Auto Ranging
Peak Hold Max. & Data Hold
Auto power off Low battery indication
User selectable FC/ Lux
USB Computer Interface (Advanced software program for all windows)
Capacity of Data Logging 99
Model No: LX-104
Basic Function | Range |
Measure Range | 400,000Lux |
Accuracy | +-5% +-10d <10000 Lux) |
+- 10%_ 10d >10000 Lux) | |
Max. Resolution | 0.1 Lux/ 0.01 Fc |
Measuring Rate | 1.5 times/ second |
The well known 'Rico' Polarmeter Model RSPT-1 & 3 form a sutiable companion instrument for the refractometer, indeed, it should be side in the laboratory Whereas the refractometer gives the total solids present in a sugar solution. The polarimeter discriminates between right-handed sugars, such as sucrose, and left-handed sugars such as levulose, etc.
The Model RSPT-1 'Risco' Polarimeter 220mm is an improved optical system in which the half shadow system is in front, at the circle end of the instrument. The following additional advantages are then available:
1. Permanent focus : that is to say, once the dividing line is focused to suit the eye this focus is never distrubed by inserting tubes of sugar or other solution, regardless of fact that they may completely homogenous, or of the length of the tube.
2. Permanent good definition even with difficult Liquids.
3. The half shadow system rotates with the ciccrle thus affording immediate indication of the direction SPECIFICATION : SCALES : Angular 0.360 subdivided to 1 Micrometer drum enable direct reading to 0.5* and by estimation to 0.2*. Sugar: 30 + 130 IIS Micrometer drum enable s reading to 0.1 sugar degree directly and to 0.5 sugar degree by estimation.
Source : SODIUM LAMP 35 Watts. White light can be used upto 12*
MODEL RSPT-3 "Rico" Palorimeter, 220 M.M., Model : RSPT-3 having the following additional advantages:
1. The optics & Triple field shadow are fabricated from Imported glass and Quartz.
2. The triple shadow system is better to comprise the field illumination at the time of measurement (reading).
3. The International Sugar Scale range is higher i.e. -130 to + 130.
4. Vernier Micrometer graduation is more to take the reading in more accuracy.
Available:
with sod lamp, 220mm & choke - RSPT-1
with sod lamp, 220mm & choke - RSPT-3
Spares:
Sodium Lamp Assembly
Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times!
FeaturesIdeal for commercial use. Includes a carrying case with belt clip. Highly efficient and accurate due to its advanced microprocessor technology.Hold Function: saves measurements for convenient reading and recording.Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Built-in digital thermometer Display: large and easy-to-read LCD screen.Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).
Specifications TDS Range: 0 - 9990 ppm (mg/L) Temp. Range: 0 - 80 degrees CelsiusResolution: 1 ppm, 1 degree Celsius (also available in 10 ppm) Accuracy: +/- 2% Conversion Factor: NaCl (avg. 0.5) ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)
Ideal for all water purification applications, wastewater regulation, aquaculture, hydroponics, and colloidal silver. Perfect for both consumer or commercial use. Carry one in your pocket or toolbox at all times!
FeaturesIdeal for commercial use. Includes a carrying case with belt clip. Highly efficient and accurate due to its advanced microprocessor technology.Hold Function: saves measurements for convenient reading and recording.Auto-off function: the meter shuts off automatically after 10 minutes of non-use to conserve batteries. Measurement Range: 0-9990 ppm. From 0-999 ppm, the resolution is in increments of 1ppm. From 1000 to 9990 ppm, the resolution is in increments of 10ppm, indicated by a blinking 'x10' image. Built-in digital thermometer Display: large and easy-to-read LCD screen.Factory Calibrated: our meters are calibrated with a 342 ppm NaCl solution. Meters can be recalibrated with a mini-screwdriver. Also available in "x10" mode: reads in increments only of 10 ppm (0-9990 ppm).
Specifications TDS Range: 0 - 9990 ppm (mg/L) Temp. Range: 0 - 80 degrees CelsiusResolution: 1 ppm, 1 degree Celsius (also available in 10 ppm) Accuracy: +/- 2% Conversion Factor: NaCl (avg. 0.5) ATC: Built-in sensor for Automatic Temperature Compensation of 1 to 50 degrees Celsius (33 to 122 degrees Fahrenheit)
Digital Turbidity Meter 31/2 digit LED display.
Range upto 1000 NTU/JTU.
Model No: LT-33
Standard Penetrometer -As per ASTMD 937, ASTMD 217, IS 1448, IP-50 with Brass Cone, Weight 50 gm or 100gm (any) and container