Our Products
Industrial Heaters
2 Products availableLeading Manufacturer, Supplier & Retailer of B.o.d. Incubator, Co2 Incubator, Fume Hood, Incubators and Digital Incubator.
Double walled construction inner chamber made of Stainless Steel & exterior made of G.I. sheets powder coated. The gap between the two walls is filled with glasswool insulation. Cooling is by hermetically sealed compressors with CFC free refrigerant. Temp
Capacity | Inner Dimensions (WxDxH) | Code |
1.5Cu.ft, 45 ltr | 35x35x35 cms | M.S.I.-9A |
3Cu.ft, 90 ltr | 45x40x50 cms | M.S.I.-9B |
6Cu.ft, 170 ltr | 50x50x70 cms/td> | M.S.I.-9C |
10Cu.ft, 280 ltr | 55x55x90 cms | M.S.I.-9D |
12Cu.ft, 330ltr | 60x60x90 cms | M.S.I.-9E |
Features:1. Internal material: high quality stainless steel. 2. Microcomputer intelligent temperature controller (P.I.D controlling), more stable and higher precision; LED High brightness digital display, intuitive and clear. 3. Double-layer door structure: Open outer door, observe studio experimental results through the inner door which is made from high intensity toughened glass, temperature and humidity unaffected 4. Infrared CO2 concentration sensor imported from Finland, display CO2 concentration directly and reliably.5. Independent heating system of the door, avoid inner glass connect dew phenomenon effectively. 6. Humidity is controlled by water dish natural evaporation, displayed directly. 7. UV lamp for sterilization, more effectively prevent cell of pollution in incubation period.
MODEL | CHAMBER SIZE (MM) | CAPACITY |
BJPX-REDWOOD | 400x400x500 | 80L |
BJPX-CYPRESS | 500x500x650 | 160L |
BJPX-PINASTER | 400x400x500 | 80L |
BJPX-POPLAR | 500x500x650 | 160L |
FH series Fume hoods are the first defense to minimize chemical exposure to research workers. They are considered the primary means of protection from inhalation of hazardous vapors. Our FH series have three models in total, the details, please see the following,
Advantages:
1. UV lamp for sterilization.
2. LCD display screen. See the air velocity directly.
3. The fan is inside. Easy to install, save time.
4. The air velocity is adjustable (6 levels).
5. Electrical controlled glass.
6. Removable work surface. Easy to clean.
7. Standard accessories: Taps, sink, duct, sockets, UV lamp, fluorescent lamp, base cabinet.
BACTERIOLOGICAL LAB INCUBATOR, Double walled construction inner chamber made of Mild Steel / St. Steel & exterior G.I. sheets powder coated. The gap between the two walls filled with glasswool insulation. Inner glass door & exterior metal door with magnetic gasket & lock. Temperature controlled by thermostat. Supplied with G.I. wiremesh shelves. Temp Range: 37C to 60C accuracy 1C.
Chamber Size | No. of Shelves |
12"x12"x12" (30x30x30cm) | 2 |
14"x14"x14" (35x35x35cm) | 2 |
18"x18"x18" (45x45x45cm) | 3 |
18"x18"x24" (45x45x60cm) | 4 |
24"x24"x24" (60x60x60cm) | 4 |
24"x24"x36" (60x60x90cm) | 5 |
BACTERIOLOGICAL LAB INCUBATOR, WITH DIGITAL TEMP CONTROLLER. Double walled construction inner chamber made of Mild Steel / St. Steel & exterior G.I. sheets powder coated. The gap between the two walls filled with glasswool insulation. Inner glass door & exterior metal door with magnetic gasket & lock. Temperature controlled by Electronic Digital Temp Controller cum indicator. Supplied with G.I. wiremesh shelves. Temp Range: 5C above ambient to 60C accuracy 0.5C.
Chamber Size | No. of Shelves |
12"x12"x12" (30x30x30cm) | 2 |
14"x14"x14" (35x35x35cm) | 2 |
18"x18"x18" (45x45x45cm) | 3 |
18"x18"x24" (45x45x60cm) | 4 |
24"x24"x24" (60x60x60cm) | 4 |
24"x24"x36" (60x60x90cm) | 5 |
Method of Detection : Conductometric
Backlit LCD Display : 16 x 2 Line Alphanumeric
Range of Moisture Detection : less than 20 PPM to 100%
Display of Reading in ml with minimum resolution: 0.01ml.
Dispenser: Motorized Dispensing for low & accurate measurement of reagent.
Electrode : Dual Platinum Electrode
Stirring Time : 00:00 to 99:00 ( Minutes:Second ) - Users Adjustable
End Point Time : 1-99 Seconds , Users Adjustable
End Point Sensitivity of Moisture Detection : Users Adjustable
Input : Electrode Connector
Power supply : 230 VAC 10% , 50 Hz
Triple walled in construction inner chamber made of SS 3040 Et exterior made of G.I. sheets powder coated. The gap between the two walls filled with glass wool insulation. Heating elements fitted on the two sides of the oven. A forced Air Circulating system with fan for better iniformity of temp. Temp. controlled by Microprocesor based Auto tune PID digital temperature controller with PT 100 as sensor. Temp. Range : 50*C to 250*C accurarcy +/-2*C
Chamber Sizes:12"x12"x12" (30x30x30cm)14"x14"x14" (35x35x35cm)18"x18"x18" (45x45x45cm)18"x18"x24" (45x45x60cm)24"x24"x24" (60x60x60cm)24"x24"x36" (60x60x90cm)
Optional Accessories:
Electronic Digital Time Range 0-999 minutes Castor wheel for easy movability Single channel Data Logger with printing arrangementRS 485 for PC communication with software Meta-LoggerSafety thermostat (Recommended by us) Temp. Controller by Microprocessor based auto tune PID controller with PT 100 as sensor Et resolution 0.01*C
Suction Capacities 2.98 to 600 m3/hour Ultimate Vacuum upto 0.005 torr in Double stage and 0.05 torr in single stage Available in Belt & Direct driven options
Test Tube Stand Aluminum:Diameter of Holes 12MM, 15MM, 18MM, 25MM, 32MM, 38MM
Test Tube Stand S.S.:Diameter of Holes 12MM, 15MM, 18MM, 25MM, 32MM, 38MM