Optimum performance of sophisticated electronic equipment is highly dependent on the stability of the mains voltage. The continuously fluctuating mains supply, transients, spikes & surges produce harmful effects. The CVTs are preferred over voltage Stabilizer as the Stabilizer have relays that are when switched cause the output voltage to be interrupted for a short time. This type of interruption or transient many not be good for computers. In comparison to voltage Stabilizer, the CVTs ensure a clean, spike-free and controlled output voltage.

optimum performance of sophisticated electronic equipment is highly dependent on the stability of the mains voltage. The continuously fluctuating mains supply, transients, spikes & surges produce harmful effects.

the cvts are preferred over voltage stabilizer as the stabilizer have relays that are when switched cause the output voltage to be interrupted for a short time. This type of interruption or transient many not be good for computers. In comparison to voltage stabilizer, the cvts ensure a clean, spike-free and controlled output voltage.

'bluebird'constant voltage transformer gives an effective solutions to all these problems.

constant voltage transformer are based on ferro-resonance principle & it consists of two basic components i.e. Ferro-resonant transformer and capacitor.

salient features:

• high reliability as no semi conductors/moving parts used.
• provide relatively sine wave output irrespective of quality of input wave shape.
• instantaneous voltage regulation.
• output highly isolated from mains for suppression of transients & spikes.
• short-term over load capacity.
• intrinsic current limiting & short circuit protection.
• higher input voltage control range for loads less than rated load.

recommendations:

• place the cvt away from equipment and all magnetic display and storage devices like diskettes, monitors, tapes etc.
• it is safer to connect cvt to mains supply through a 3 pin socket ensuring thereby the availibility of proper 'earth' connection.
• switch on the cvt first then the attached peripherals and while switching off, switch off attached peripheerals first and then the cvt.
• in case of supply from a generator, check frequency, cvt is not be used if frequency variation is beyond 50 +/-1hz.
• switch off the cvt when not in use.
• not to be used for high inductive loads like motors.

SPECIFICATIONS :

• Automatic Voltage Stabilizer
• Input - 160-260 Volt
• Output - 90-110 Volt
• With high voltage cut off protection
• Universal output socket
• Available in 0.5 KVA/ 1 KVA/ 2 KVA/ 5 KVA

Output of An isolation transformer is totally isolated from input. Any fault, leakage, Electrical noise, voltage transients, spikes etc. in the input side because of other loads connected in parallel are not reflected on the output, thus avoiding damage to sensitive electrical equipment

Isolation Transformer are available as open type as well as metal enclosure.

We are also MANUFACTURING Transformer of different type and capacities to suite INDIVIDUAL requirement. Single phase and three phase, auto double wound, air/oil cooled. We have enough capacity to serve DIVERSIFIED CUSTOMERS and heavy volume requirement of Transformer. We are well equipped with plant & machinery to supply good quantity orders on committed time.

Optimum performance of sophisticated electronic equipment is highly dependent on the stability of the mains voltage. The continuously fluctuating mains supply, transients, spikes & surges produce harmful effects. The CVTs are preferred over voltage Stabilizer as the Stabilizer have relays that are when switched cause the output voltage to be interrupted for a short time. This type of interruption or transient many not be good for computers. In comparison to voltage Stabilizer, the CVTs ensure a clean, spike-free and controlled output voltage.

optimum performance of sophisticated electronic equipment is highly dependent on the stability of the mains voltage. The continuously fluctuating mains supply, transients, spikes & surges produce harmful effects.

the cvts are preferred over voltage stabilizer as the stabilizer have relays that are when switched cause the output voltage to be interrupted for a short time. This type of interruption or transient many not be good for computers. In comparison to voltage stabilizer, the cvts ensure a clean, spike-free and controlled output voltage.

'bluebird'constant voltage transformer gives an effective solutions to all these problems.

constant voltage transformer are based on ferro-resonance principle & it consists of two basic components i.e. Ferro-resonant transformer and capacitor.

salient features:

• high reliability as no semi conductors/moving parts used.
• provide relatively sine wave output irrespective of quality of input wave shape.
• instantaneous voltage regulation.
• output highly isolated from mains for suppression of transients & spikes.
• short-term over load capacity.
• intrinsic current limiting & short circuit protection.
• higher input voltage control range for loads less than rated load.

recommendations:

• place the cvt away from equipment and all magnetic display and storage devices like diskettes, monitors, tapes etc.
• it is safer to connect cvt to mains supply through a 3 pin socket ensuring thereby the availibility of proper 'earth' connection.
• switch on the cvt first then the attached peripherals and while switching off, switch off attached peripheerals first and then the cvt.
• in case of supply from a generator, check frequency, cvt is not be used if frequency variation is beyond 50 +/-1hz.
• switch off the cvt when not in use.
• not to be used for high inductive loads like motors.

SPECIFICATIONS :

• Automatic Voltage Stabilizer
• Input - 160-260 Volt
• Output - 90-110 Volt
• With high voltage cut off protection
• Universal output socket
• Available in 0.5 KVA/ 1 KVA/ 2 KVA/ 5 KVA

Output of An isolation transformer is totally isolated from input. Any fault, leakage, Electrical noise, voltage transients, spikes etc. in the input side because of other loads connected in parallel are not reflected on the output, thus avoiding damage to sensitive electrical equipment

Isolation Transformer are available as open type as well as metal enclosure.

We are also MANUFACTURING Transformer of different type and capacities to suite INDIVIDUAL requirement. Single phase and three phase, auto double wound, air/oil cooled. We have enough capacity to serve DIVERSIFIED CUSTOMERS and heavy volume requirement of Transformer. We are well equipped with plant & machinery to supply good quantity orders on committed time.