GST : 27AAYFB3961B1Z9
Verified
Write a Review
Our Products
Paints
2 Products availableLaboratory Reagents
2 Products availableNano Powder
2 Products availableRocket Propellants
1 Products availablePigments
1 Products availableAcid Dyes
1 Products availableCitrus Fruit
1 Products availableOur Complete range of products are Dimethyl Glyoxime, Phenyl Hydrazine Hydrochloride, THYMOL BLUE, ANTIMONY POTASSIUM TARTRATE and Strontium Iodide Hexahydrate.
Details
| Appearance | Red to very dark red and red-brown and brown-red crystals |
| Assay (ex Co) | 97.0 - 102.0% |
| Chloride (Cl) | Max 0.005% |
| Sulphate (SO4) | Max 0.03% |
| Iron (Fe) | Max 0. 01% |
| Nickel (Ni) | Max 0.3% |
Details
| Appearance | Ruby red crystals |
| Assay | 99.0 - 102.0% |
| Insoluble matter | Max. 0.01% |
| Chloride (Cl) | Max. 0.01% |
| Ferricyanide [(Fe(CN)6]3- | Max. 0.01% |
| Ferrocyanide [(Fe(CN)6]4- | Max. 0.02% |
| Sulphate (SO4) | Max. 0.01% |
Details
| Appearance | White to creamish yellow crystalline powder |
| Assay (gravimetric) | Min 99% |
| Melting point (with decomposition) | 238 - 241 deg C |
| Alcohol insoluble matter | Max 0.01% |
| Loss on drying (at 110°C) | Max 1.0% |
| Sulphated ash | Max 0.025% |
| Suitability (for Nickel determination) | Passes test |
Details
| Appearance | Pale yellow colored liquid |
| Assay (by HClO4 titration) | Min 98% |
| Freezing point | 19 - 20 °C |
| Sulphated ash | Max 0.1% |
| Iron (Fe) | Max 0.001% |
| Nickel (Ni) | Max 0.001% |
| Lead (Pb) | Max 0.001% |
Details
| Appearance | Red-brown to dark brown crystalline powder |
| Solubility (0.1% in 0.1 N NaOH) | Clear reddish to violet |
| Absorption maxima (0.1N NaOH) | 575 - 585 nm |
| Absorptivity (A 1%/1cm; at λmax) | Min 550 |
| Loss on drying (at 105°C; 1 hr) | Max 7% |
| Sensitivity for Zinc | Passes test |
Details
| Appearance | Reddish powder |
| Visual transition range | From pH 6.8 (Yellow) - 8.2 (Red) |
| Absorption maxima at pH 6.5 (λ1) | 430 - 435 nm |
| Absorption maxima at pH 8.2 (λ2) | 557 - 560 nm |
| Loss on drying (at 110°C) | Max 5.0% |
| Clarity of solution | Passes ACS test |
Details
| Appearance | Brownish red fine powder |
| Absorption maxima | 515 - 518 nm |
| Dye content (by spectrophotometry) | Min 90% |
| Solubility (0.1% in water) | Clear solution |
| Absorptivity (A 1%/1cm; at λmax; in water) | 1200 - 1400 |
| Loss on drying (at 110°C) | Max 8% |
| Copper (Cu) | Max 0.005% |
| Iron (Fe) | Max 0.005% |
| Nickel (Ni) | Max 0.005% |
| Lead (Pb) | Max 0.005% |
| Suitability (for microscopy) | Passes test |
Details
| Appearance | A white to off white powder |
| pH range (8.2 - 10.0) | Colourless to red-violet |
| Absorption maxima (buffer pH 9.8) | 551 - 554 nm |
| Sensitivity | Passes test |
| Sulphated ash | Max 0.05% |
| Chloride (Cl) | Max 0.01% |
| Sulphate (SO4) | Max 0.01% |
| Loss on drying (at 110°C) | Max 1% |
Details
| Appearance | Dark red to maroon to violet or purple powder or crystals |
| Identity | Passes test |
| pH transition range (4.2 - 6.2) | Pink Red – yellow orange |
| Insoluble matter in ethanol (1 g/L) | Passes test |
| Absorption maxima (buffer pH 4.2) | 523 - 526 nm |
| Absorption maxima (buffer pH 6.2) | 427 - 437 nm |
| Loss on drying (at 110°C) | Max 5.0% |
| Residue on ignition (as SO4) | Max 2.0% |
Details
| Appearance | Yellow to Tan Coloured Powder |
| Dye content (by spectrophotometry) | Min 95% |
| Identity (IR) | Passes test |
| pH 3.8-5.4 | Yellow to blue |
| Appearance of solution | Conforms |
| Absorption maxima (0.003% Methanol) | 418 – 428 nm |
| Molar Absorptivity at lambda max | Min 17000 |
| Loss on drying (at 110°C) | Max 3% |
| Transition range (according to ACS) | Passes test |
| Sensitivity | Passes test |
Details
| Appearance | Pink to purple color powder |
| pH transition (6.0-7.6) | Yellow to blue |
| Appearance of solution | Passes test |
| Loss on drying (at 110°C) | Max 3.0% |
| Transition range (according to ACS) | Passes test |
| Sensitivity | Passes test |
Details
| Appearance | Brownish green powder |
| Acidic range pH 1.2-2.8 | Red to yellow |
| Alkaline range pH 8.0-9.6 | Yellow to blue |
| Loss on drying | Max 10% |
| Dye content (by spectrophotometry) | Min. 95.0% |
Solubility Information
Solubility in water: 165g/100 mL (20°C). Other solubilities: soluble in alcohol, freely soluble in acetone
Other Details
| Appearance | White crystalline powder |
| Assay | Min 99% |
| Chloride (Cl) | Max 0.002% |
| Nitrate (NO3) | Max 0.001% |
| Insoluble matter | Max 0.01% |
| Heavy metal (as Pb) | Max 0.0005% |
| Iron (Fe) | Max 0.0005% |
| Calcium (Ca) | Max 0.005% |
| Sodium (Na) | Max 0.005% |
| Potassium (K) | Max 0.05% |
| Loss on drying (at 150°C) | 13 - 15% |
Details
| Appearance | Dark green crystalline powder |
| Assay | Min 93% |
| pH (5% solution in water) | 2.0 - 3.0 |
| Sulphate (SO4) | Max 0.05% |
| Copper (Cu) | Max 0.001% |
| Iron (Fe) | Max 0.01% |
| Lead (Pb) | Max 0.005% |
| Substance not precepitated by NH3 (as SO4) | Max 0.2% |
Details
| Appearance | White powder or crystal or chunks |
| Assay | Min 99% |
| Insoluble matter in water | Max 0.01% |
| Chloride (Cl) | Max 0.005% |
| Sulphate (SO4) | Max 0.01% |
| Iron (Fe) | Max 0.001% |
| Potassium (K) | Max 0.002% |
| Sodium (Na) | Max 0.01% |
| Zinc (Zn) | Max 0.002% |
Details
| Appearance | White powder. |
| Assay (ex Bi; as Bi2(SO4)3) | Min 90% |
| Chloride (Cl) | Max 0.01% |
| Nitrate (NO3) | Max 0.025% |
| Potassium (K) | Max 0.005% |
| Sodium (Na) | Max 0.01% |
Antimony potassium tartrate has the empirical formula C4H4KO7Sb and a molecular weight of 324.92. It forms transparent crystals or powder with a sweetish, metallic taste. The density is 2.6. It is soluble in water and glycerol, insoluble in alcohol.
Additional Information:
Packaging Details : antimony potassium tartrate HDPE DRM 25kg.
Strontium iodide is an inorganic compound with the chemical formula SrI 2. It is a salt of strontium and iodine. It forms a hexahydrate SrI 26H2O. It is an ionic, water-soluble, and deliquescent compound that can be used in medicine as a substitute for potassium iodide.
Additional Information:
Packaging Details : Strontium Iodide Hexahydrate HDPE DRM 25kg.
Cobalt dinitrate hexahydrate is a hydrate that is the hexahydrate form of cobalt dinitrate. It is a hydrate, a cobalt salt and an inorganic nitrate salt.
Additional Information:
Packaging Details : Cobalt Nitrate Hexahydrate HDPE DRM 25kg.
Cobalt Citrate Dihydrate is a Chemical Paoduct.
Additional Information:
Packaging Details : Cobalt Citrate Dihydrate HDPE DRM 25kg.
Cesium nitrate is a colorless, glittering crystalline solid. It is soluble in water. It is a strong oxidizing material and may burst into flames on contact with organic materials.
Additional Information:
Packaging Details : Cesium Nitrate HDPE DRM 25kg.
Cobalt(II) iodide or cobaltous iodide are the inorganic compounds with the formula CoI2 and the hexahydrate CoI2(H2O)6. These salts are the principal iodides of cobalt
Additional Information:
Packaging Details : Cobalt Iodide Hexahydrate HDPE DRM 25kg.
Cobalt octoate is the most active surface dryer. Cobalt ensures rapid drying of the surface and is generally used in conjunction with auxiliary dryers. Cobalt octoate is typically added in an amount of 0.05-0.4% based on the vehicle solids. It is a powerful oxidizer.
Additional Information:
Packaging Details : cobalt octoate HDPE DRM 25kg.
Anhydrous NiBr2 is a paramagnet at room temperature. Upon cooling, it turns into an antiferromagnet at 52 K, and then into a helimagnet at 22.8 K. The structure of the trihydrate has not been confirmed by X-ray crystallography. It is assumed to adopt a chain structure.
Additional Information:
Packaging Details : Cobalt Iodide Hexahydrate HDPE DRM 25kg.
Stannous fluoride is an inorganic fluoride salt. Stannous Fluoride, or Tn(II) Fluoride, is a compound commonly used in toothpastes for the prevention of gingivitis, dental infections, cavities, and to relieve dental hypersensitivity.
Additional Information:
Packaging Details : stannous fluoride HDPE DRM 25kg.
Selenium dioxide appears as a white or creamy-white volatile lustrous crystal or crystalline powder with a pungent sour smell.
Additional Information:
Packaging Details : selenium dioxide HDPE DRM 25kg.
Cobalt(II) perchlorate is an inorganic chemical compound with the formula Co(ClO4)2nH2O (n = 0, 6). The pink anhydrous and red hexahydrate forms are both hygroscopic solids.
Additional Information:
Packaging Details : Cobalt Perchlorate HDPE DRM 25kg.
Copper(II) Nitrate Trihydrate is a highly water soluble crystalline Copper source for uses compatible with nitrates and lower (acidic) pH. All metallic nitrates are inorganic salts of a given metal cation and the nitrate anion.
Additional Information:
Packaging Details : Copper Nitrate Trihydrate HDPE DRM 25kg.
Potassium hydrogen sulfate is a colorless crystalline solid with a sulfur odor. It may cause illness from ingestion. If heated to high temperatures it may emit toxic fumes. It is used to make fertilizers and wine.
Additional Information:
Packaging Details : Potassium hydrogen sulfate HDPE DRM 25kg
Strontium carbonate (SrCO3) is the carbonate salt of strontium that has the appearance of a white or grey powder. It occurs in nature as the mineral strontianite.
Additional Information:
Packaging Details : strontium carbonate HDPE DRM 25kg.
Cobalt hydroxide is a chemical compound containing 30-40% of cobalt. Cobalt is a mineral that has a high melting point (1493 degrees Celsius) that helps it to retain its strength to a high temperature and is also known to be ferromagnetic. Cobalt is typically mined as a by-product of copper or nickel.
Additional Information:
Packaging Details : Cobalt Hydroxide HDPE DRM 25kg.
Chromic sulfate is a dark green to violet crystalline material. Used in paints and inks, ceramics, and in textile dyeing. It is noncombustible. The primary hazard of this material is the potential for environmental damage if released.
Additional Information:
Packaging Details : Chromium Sulphate Powder HDPE DRM 25kg.
Cobalt(II) sulfate is any of the inorganic compounds with the formula CoSO4(H2O)x. Usually cobalt sulfate refers to the hexa- or heptahydrates CoSO46H2O or CoSO47H2O, respectively. The heptahydrate is a red solid that is soluble in water and methanol.
Additional Information:
Packaging Details : Cobalt Sulfate Heptahydrate HDPE DRM 25kg.
Strontium Bromimide Hexahydrate is generally immediately available in most volumes. Ultra high purity, high purity, submicron and nanopowder forms may be considered. Most metal bromide compounds are water soluble. Bromide in an aqueous solution can be detected by adding carbon disulfide (CS2) and chlorine.
Additional Information:
Packaging Details : Strontium Bromide Hexahydrate HDPE DRM 25kg.
Ammonium aluminium sulfate, also known as ammonium alum or just alum (though there are many different substances also called "alum"), is a white crystalline double sulfate usually encountered as the dodecahydrate.
Additional Information:
Packaging Details : aluminum ammonium sulfate HDPE DRM 25kg.
Zinc Sulphate Heptahydrate / Zinc Sulfate Heptahydrate (ZnSO47H2O) occurs in nature as the mineral goslarite. Chemists manufacture it by treating any metal that contains zinc with sulfuric acid. For pharmaceutical use, chemists use high-purity zinc oxide to obtain the ZnSO47H2O.
Additional Information:
Packaging Details : zinc sulphate heptahydrate HDPE DRM 25kg.
Arsenic trioxide is an amphoteric oxide, and its aqueous solutions are weakly acidic. Thus, it dissolves readily in alkaline solutions to give arsenites. It is less soluble in acids, although it will dissolve in hydrochloric acid.
Additional Information:
Packaging Details : Arsenic Oxide HDPE DRM 25kg.
disodium hydrogen phosphate, or sodium phosphate dibasic, isan inorganic compound with the chemical formula Na2HPO4.
Additional Information:
Packaging Details : Di Sodium Hydrogen Phophate hype DRM 25kg
Potassium Hydrogen Phthalate (KHP) is a classic primary standard substance in that it is readily available in high purity; is relatively inexpensive.
Additional Information:
Packaging Details : potassium hydrogen phthalate HDPE DRM 25kg
Hydrogen peroxide is a colorless liquid at room temperature with a bitter taste. Small amounts of gaseous hydrogen peroxide occur naturally in the air. Hydrogen peroxide is unstable, decomposing readily to oxygen and water with release of heat.
Additional Information:
Packaging Details : Hydrogen Peroxide HDPE DRM 25kg
Strontium fluoride, SrF2, also called strontium difluoride and strontium(II) fluoride, is a fluoride of strontium. It is a brittle white crystalline solid. In nature, it appears as the very rare mineral strontiofluorite.
Additional Information:
Packaging Details : strontium fluoride HDPE DRM 25kg.
Additional Information:
Packaging Details : Tin Oxide hdpe DRM 25 kg
Strontium is one of many trace minerals essential for bone health. It is a divalent cation and is transported through the body using many of the same transport molecules and receptors as calcium. Recent research has highlighted strontium's potential to support bone strength and health.
Additional Information:
Packaging Details : Strontium Citrate HDPE DRM 25kg.
Strontium perchlorate is a white powder or colorless crystals with the formula Sr(ClO4)2. Except where otherwise noted, data are given for materials in their standard state (at 25 C [77 F], 100 kPa). It is a strong oxidizer which gives red flames.
Additional Information:
Packaging Details : strontium perchlorate HDPE DRM 25kg.
Mr. Ayush (Blue Ocean Chemicals)
Navapur Road, M.I.D.C, Tarapur, Mumbai, Maharashtra - 401506, India
Share us via
View Contact Number 
