Our Products
We are leaders in the market for providing best range of 485P Serial Converter, NP3016T-16DI(RS-485) Serial Device Server and SW485GI Serial Converter
MODEL485P is a RS-232 to RS-485/422 interface converter that can achieve bidirectional conversion between RS-232 and RS-485/422. It provides 1 RS-232 serial port and 1 RS-485/422 serial port. The RS-485/422 supports serial port self-adaption technology that can identify RS-485/422 serial port automatically without the need of setting the switch. Serial ports are equipped with 1500W surge protection, 15kV electrostatic protection and 2500V photoelectric isolation protection, which can effectively avoid surge and lightning strike. The device also adopts wall mounting, which can meet the requirements of different scenes.
Hardware adopts fanless, low power consumption, wide temperature and voltage design. It can be wildly used in indoor and outdoor system like attendance, entrance guard, cloud platform control, food selling and parking lot, etc.
Specifications
Serial Port | Standard: EIA RS-232C, RS-485, RS-422 |
Serial port quantity: 1 RS-232 serial port, 1 RS-485/422 serial port | |
RS-232 signal: TXD, RXD, GND | |
RS-485 signal: 485+, 485-, GND | |
RS-422 signal: T+, T-, R+, R-, GND | |
Baud rate: 110bps~115200bps | |
Data bit: 8bit | |
Stop bit: 1bit, 1.5bit, 2bit | |
Check bit: None, Odd, Even, Mask, Space | |
Interface type: RS-232 serial port, adopts DB9, Female; | |
RS-485/422 serial port, adopt 5-pin 5.08mm pitch terminal blocks, DB9 Male or RJ45 | |
Transmission distance: RS-232 serial port, 15m; | |
RS-485/422 serial port, 1800m (115200bps) | |
Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically | |
Load capacity: RS-485 supports 32-point polling environment (128-point could be customized) | |
Interface protection: 1500W surge protection, 15kV electrostatic protection | |
Photoelectric isolation: 2500V | |
LED Indicator | Power supply indicator, serial port data sending/receiving indicator |
Power Requirement | 9VDC, DC round head |
RS-232 port obtains power from the TXD, RTS, DTR signal of RS-232 | |
Power Consumption | Static power consumption: ≤70mA |
Dynamic power consumption (mean): ≤200mA | |
Environmental Limit | Operating temperature: -20~75℃ |
Storage temperature: -25~85℃ | |
Relative humidity: 5%~95%(no condensation) | |
Physical Characteristic | Housing: metal, IP30 protection |
Installation: wall mounting | |
Dimension (W x H x D): 62.4mm×22mm×93mm | |
Weight: 200g | |
Certification | CE, FCC, RoHS |
Warranty | 3 years |
NP3016T series are the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network. This series include 4 types of products; provide 16 RS-232/485/422/3IN1 serial port to 1 100M Ethernet copper port and support single or dual Ethernet port. It adopts rack mounting to meet the requirements of different application scenes.
Serial device server supports multiple network protocols, such as TCP, UDP, SNMP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocol. It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on. Each serial port supports 4 TCP or UDP session connections, and it also supports RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang, UDP Multicast operating modes and TELNET, WEB access modes. Furthermore, supplied management configuration tool based on Windows platform can guide the user to manage and configure the device, achieving immediate networking of serial device via simple settings. It can provide users with good experience with friendly design of network management system interface, simple and convenient operation.
DIP switch can achieve restore factory defaults of the device. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.
Features and Benefits :
Specifications
Ethernet | Standard: 10Base-T, 100Base-TX |
Protocol: TCP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS | |
Rate: 10/100M automatic flow control, MDI/MDI-X autotunning | |
Interface form: RJ45 | |
Interface quantity: 1 or 2 | |
Duplex mode: full/half duplex mode self-adaption | |
Operating mode: 4 sessions, support RealCom, TCP Server, TCP Client, UDP Server, UDP Client, Pair Master, Pair Slave, UDP Rang and UDP Multicast operating modes | |
Serial Port | Standard: EIA RS-232C, RS-485, RS-422 |
Quantity of serial port: 16 RS-485/422 or 3IN1 serial port | |
RS-232 signal: RXD, TXD, DTR, GND, DSR, RTS, CTS, DCD | |
RS-485 signal: D+, D-, GND | |
RS-422 signal: T+, T-, GND, R+, R- | |
Baud rate: 300-115200bps | |
Data bit: 5bit, 6bit, 7bit, 8bit | |
Parity bit: None, Even, Odd, Space, Mark | |
Stop bit: 1bit, 2bit | |
Interface form: RS-485/422 serial port with isolation, adopt 5 pins 5.08mm pitch terminal blocks | |
3IN1 serial port, adopt RJ45 | |
Flow control: RTS/CTS, DTR/DSR, XON/XOFF | |
Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC) | |
Load capacity: RS-485/422 end supports 32 points polling (customizable 128 points) | |
Transmission distance: RS-232, 15m; RS-485/422, 1200m | |
Pull high/low resistor for RS-485: 4.7kΩ | |
Electromagnetic isolation strength: RS-485/422 serial port (terminal block), 1.2kVAC | |
Configuration | WEB configuration management, TELNET configuration, Windows configuration tool |
Security | Classification of User Permissions, IP address filtering, MAC address filtering, WEB console, TELNET console |
Indicator | Power supply indicator, Ethernet port indicator, serial port indicator, running indicator |
Power Requirement | Power supply: 85~265VAC |
Single power supply: NP3016T-16D(RS-232), NP3016T-16D(3IN1), NP3016T-16DI(RS-485) | |
Dual power supply: NP3116T-16D(3IN1) | |
Environmental Limit | NP3016T-16DI(RS-485) |
Operating temperature: -25~55℃ | |
Storage temperature: -30~85℃ | |
Relative humidity: 5%~95%(no condensation) | |
NP3016T-16D(RS-232), NP3016T-16D(3IN1), NP3116T-16D(3IN1) | |
Operating temperature: -25~55℃ | |
Storage temperature: -40~85℃ | |
Relative humidity: 5%~95%(no condensation) | |
Physical Characteristic | Housing: IP30 protection, metal |
Installation: rack mounting | |
Dimension (W x H x D): 441.6mm×44.6mm×207.9mm | |
Weight: ≤2500g | |
Industrial Standard | IEC 61000-4-2 (ESD, Electro-static Discharge) ,Level 3 |
Air discharge: ±8kV | |
Contact discharge: ±6kV | |
EC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3 | |
Power supply: ±2kV | |
Signal: ±2kV | |
EC 61000-4-5 (Surge), Level 2 | |
Power supply: common mode ±1kV, differential mode ±1kV | |
Signal: common mode ±1kV, differential mode ±1kV | |
Shock: IEC 60068-2-27 | |
Free fall: IEC 60068-2-32 | |
Vibration: IEC 60068-2-6 | |
Certification | CE, FCC, RoHS |
Warranty | 3 years |
SW485GI is an industrial-grade interface converter device integrated bidirectional conversion between RS-232 and RS-485/422 and RS-485/422 repeater, which can implement bidirectional data conversion between serial port RS-232 and RS-485/422, or be a repeater of RS-485 and RS-422 transmission. It provides 1 RS-232 serial port and 2 RS-485/422 serial ports. RS-485/422 supports serial port self-adaption technology that can identify RS-485/422 serial port automatically without the need of setting the switch. Serial ports are equipped with 1500W surge protection, 15kV electrostatic protection and 3kV photoelectric isolation protection, which can effectively prevent device from being damaged. The device also adopts wall mounting, which can meet the requirements of different scenes.
Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC and be wildly used in electric power system, industrial automation control, IC card charging system and measuring instrument, etc.
Specifications
Serial Port | Standard: EIA RS-232C, RS-485, RS-422 |
Serial port quantity: 1 RS-232 serial port, 2 RS-485/422 serial port | |
Conversion mode: RS-232 and RS-485/422 data conversion, RS-485/422 repeater (two modes cannot operate simultaneously) | |
RS-232 signal: TXD, RXD, GND | |
RS-485 signal: D+, D-, GND | |
RS-422 signal: T+, T-, R+, R-, GND | |
Baud rate: 300bps ~115200bps | |
Interface type: RS-232 serial port, adopts DB9, Female; | |
RS-485/422 serial port, adopt 5-pin 5.08mm pitch terminal blocks | |
Transmission distance: RS-232 serial port, 15m; | |
RS-485/422 serial port, 3000m (9600nps) | |
Direction control: RS-485 adopts automatic data flow control technology which can detect and control data transmission direction automatically | |
Load capacity: RS-485 supports 32-point polling environment (128-point could be customized) | |
Interface protection: 1500W surge protection, 15kV electrostatic protection | |
Photoelectric isolation: 3000V | |
LED Indicator | Power supply indicator, serial port data sending/receiving indicator |
Power Requirement | 12~36VDC, 3-pin 5.08mm pitch terminal blocks |
Power Consumption | Static power consumption: ≤150mA |
Dynamic power consumption: ≤350mA | |
Environmental Limit | Operating temperature: -10~75℃ |
Storage temperature: -40~75℃ | |
Relative humidity: 5%~95%(no condensation) | |
Physical Characteristic | Housing: metal, IP30 protection |
Installation: wall mounting | |
Dimension (W x H x D): 69mm×22mm×100mm | |
Weight: 170g | |
Certification | CE, FCC, RoHS |
Warranty | 3 years |