Our Products
Valves & Valve Fittings
2 Products availableChemical Machinery & Plant
1 Products availableFlow Meters
1 Products availableCalibrators And Monitoring Systems
1 Products availableLevel Transmitters
1 Products availableLevel Switches
1 Products availableWater Heaters
1 Products availableFilters
1 Products availableStorage Tanks
1 Products availableLeading Manufacturer, Supplier & Retailer of Gas Conditioning, Heater Treater and Radar Transmitter.
For removal of liquid / solid particles down to 1 micron with 99. 9% efficiency.Horizontal / Vertical design. High performance, proven make, coalescing type glass fiber elements used in primary section.Secondary section provided with efficient impingement separators or mist eliminators to remove coalesced liquid. Compact, well engineered skid mounted layout to facilitate easy access to all Valves, Instruments & Filter Elements.In horizontal filter separator down comers from primary and secondary sections pass liquid to sump to prevent re-entry. Large liquid collection volumes. Equipment provided with quick opening closures for quick access to filter elements. Provision for automated liquid level monitoring & liquid removal.
Ensures supply of Dry and Dust Free Gas.Generally it comprises of a 1 100% Knockout Drum & 2 100% Filter Separators together with Indirect Water Bath Heater (as per service requirement) complete with Interconnecting Piping, Valves, Instrumentations, Electrical and PLC based Control Panels for unattended & smooth operation.Separation and Removal of Liquid from the Gas Stream.Compact, well-engineered skid mounted layout to facilitate easy access to all Valves, Instruments & Filter Elements.Condensate Tanks & Vent Stack also provided. Stainless Steel piping used downstream of Filter Separation System to ensure contaminant free pure gas.
Gas Fired Indirect Water Bath Heaters designed in full compliance to API 12K specifications. Natural Draft Burners, directly mounted on Fire Tube. Forced Draft Burners also provided as per requirement. Precise temperature control of Water Bath. Equipment adequately designed to allow sufficient retention period.Removable Single or Twin Fire Tube Design. Removable Heating Coil for ease of maintenance. Burners System complete with Pilot, Main Burner, Gas Train, Spark Igniter with Transformer provided. Flame Arrestors at Burners Air Intake and Stack Top provided. Large Heating capacity upto 5 Million K.Cal/Hr.
Design, engineering, procurement and fabrication of above ground steel storage tanks with complete in-house design facility for floating, cone & dome roof tanks as per API 650. Supply includes tank protection systems like fire protection, rim seal fire protection, and cathodic protection systems.Procurement & supply of tank accessories like flame arrestors, side entry mixers, radar gauges, level instruments, heating coils & other instruments as per engineering requirement. Technical support & assistance provided by trained personnel during erection & commissioning.
Recommended for use with Bliss Anand Liquid Level Gauge Series and is compatible with all armored flat glass Liquid Level Gauges. Stainless stell ball check located upstream of the seat instantly shuts off flow in case of gauge glass break.Union gauge connection enables gauge removal without removing the gauge valves.Standard unit consist of ASTM A105 forged carbon steel body, 316/416SST stem, grafoil packing, 316 SST ball check, steel handle and FNPT vent & drain.
Bliss Anand Heater Treaters are designed to carry out the process of oil-gas separation, free water removal, heating, settling and washing of crude oil all within a single compact unit.The heater treater is skid mounted and complete with valves, instruments and accessories to ensure safe and reliable unattended operation.
Specification
| Gas separation section designed to thin film entering emulsion for quick gas break out. | ||
| Immersed downcomer piping from gas separation section to emulsion spreader serves as an effective heat exchanger topreheat incoming emulsion and cool the clean oil. | ||
| Deep Freewater Knockout sections below the firebox provides isolation and draw off free water, thereby avoiding unnecessary heating of water and conserving fuel. | ||
| Controls & Instrumentation provided to accurately measure the Gas, Oil & Water Flow rates, regulate the Pressure and Monitor the levels of Oil, Water in the Separator. | ||
| Quick adjustable outside water siphon provides easy interface control over a wide range of water and oil specific gravities. | ||
| Adequate surge volume in the clean oil section relieves heading overload in gas separation section eliminating thepossibility of liquid carry-over with the gas. | ||
| High capacity firebox furnishes abundant heat and quick response to thermostatically controlled demand. |
ASME NB Certified: Air, Steam & Water European CE Approved Sizes 1 X 2 to20 X 24. Actual orifice areas from 0.150 to 176.7 square inches.Pressures from 15 to 6000 psig. Temperature range from -450 F to +1500 F. Steel body and bonnet with stainless steel trim.
Optional balanced bellows design isolates working parts and top-works from fouling or corrosive service, and nullifies the effects of back pressure on valve performance.
The "D" to "T" orifices meet API Standard 526 covering orifice areas and center-toface dimensions. Super capacity types range from "W" (63.62 sq. in.) to "Z" (176.7sq. in.) and have a maximum set pressure limit of 300 psig.
Optional materials of construction include complete 316 stainless steel, Monel, and Hastelloy C.Also available with materials in compliance with NACE standards.Higher temperature models use chrome moly body and bonnet.
Optional O-ring elastomer seat available for maximum tightness.
Bliss Anand Type 2 & 3 switch mechanism are fitted with magnetically operated snap-action contact switches. The Bliss Anand switches operating mechanisms are constructed entirely in AISI304 stainless steel and fitted with a terminal board of resin suitable for high temperature applications. These two switches mechanism differ in the type of snap-action switches fitted and cover a wide range of applications and operating conditions.
Specification | ||
Special coating and linings. Special testing inspection and certification.SPECIAL MATERIALS such as low temperature steel, AISI 316 L stainless steel, inconal, monel and PVC for chambers.AISI 316 L, inconal, hastelloy, monel, teflon etc. for internal parts.SPECIFIC CONNECTIONS.SPECIAL MODELS for very high pressure.EXTERNAL CHAMBER for series 7700 models. |
Bliss Anand brings you two models of Radar Transmitters - The BlissFlex 2200 and the BlissWave 5200
BlissFlex 2200 Series
The BlissFlex 2200 Guided Wave Transmitter is used for measuring distance, level, volume and mass. It is reliable and frequently used for common applications. | ||
Specification | ||
Accuracy +/- 0.12". Measurement range up to 130 feet. Output 4-20 mA HART / FF / Profibus PA. Explosion-proof and intrinsically safe. Enclosure rating to NEMA 4X. SIL2. CRN approval. Meets high pressure high temperature requirements. |
BlissWave 5200 Series
Our BlissWave 5200 Series is a radar meter for liquid applications. The design incorporates a unique locking system and antenna extensions to allow compatibility with various mounting positions and applications. | ||
Specification | ||
High accuracy and repeatability. Measurement range up to 98 feet. Output 4-20 mA HART / FF / Profibus PA. Explosion-proof and intrinsically safe. Enclosure rating to NEMA 4X. CRN approval. Meets high pressure high temperature requirements. | ||
The Model BAMR3/4 liquid level transmitter satisfies the demand for an analog communication interface for magnetic level gauge (MLG) applications. The Model BAMR3/4 transmitter provides a 4-20mA output for most MLG manufacturers and allows for mounting external to the chamber without interrupting the process.
Features
High accuracy and Repeatability
4 to 20 mA analog output with HART
No drift due to changes in:
- Dielectric | ||
- Vapor Composition | ||
- Temperature | ||
- Pressure | ||
Factory calibrated (No recalibration or maintenancerequired) | ||
AMS aware | ||
Explosion-proof and/or Intrinsically Safe | ||
Applications | ||
Inventory Control | ||
Process Vessel | ||
Bypass Chamber |