Blinex Filter - Coat Private Limited

Andheri East, Mumbai, Maharashtra

Chemical ResistancePTFE is resistant to virtually all chemicals, even at very high temperature and pressures. It is only affected under certain conditions by elementary fluorine, strong fluorinating agents (such as chlorine trifluoride) and molten alkali metals (such as metals sodium). It contains no additives such as lubricants, stabilizers, plasticizers or antioxidants that can contaminate process fluids. Temperature ResistancePTFE components can be used at temperatures ranging from approximately -100^oC to +260^oC Electric InsulatorPTFE has excellent electric properties which remain constant independent of frequency and temperature. Coefficient of FrictionPTFE has the lowest coefficient of friction of all solid materials; its abrasions resistance is adaptable to demanding environments by using inorganic fillers such as glass fiber, carbon or graphite.
Anti stick EffectPTFE is an anti-adhesive, i.e. other materials do not adhere to PTFE Service LifePTFE exhibits excellent retention of properties after a long period of time, even at elevated temperatures and in the presence of oils, solvents, UV light, oxidizing agents and other environmental agents. PTFE Rods Standard Sizes: Diameter: 3 mm to 300 mm;Length: 300 mm and 1000 mm We can provide customized (special) sizes on request; PTFE Bush Standard Sizes:
Outer Diameter O.D.: 12.5 mm to 250 mm;Inner Diameter I.D.: 12.5 mm to 250 mm;Length: 100 mm to 300 mm We can provide customized (special) sizes on request; PTFE Tubing Flexible Standard Sizes: Outer Diameter O.D.: 3.2 mm to 28.0 mm;Inner Diameter I.D.: 1.6 mm to 25.1 mm;Wall thickness: 0.8 mm to 1.6 mmLength: 3 mtrs to 120 mtrs We can provide customized (special) sizes on request; PTFE Pipes Rigid Standard Sizes: Outer Diameter O.D.: 25 mm to 100 mm;Inner Diameter O.D.: 19 mm to 89 mm;Wall thickness: 3 mm to 25 mmLength: upto 50 mtrs We can provide customized (special) sizes on request; Please note Fillers such as Glass/ Carbon/ Graphite/ Bronze + MOS2; are available for PTFE Rods and Bushes PTFE Sheets - Thin Sheets (Skiving Sheets) Standard Sizes: Thickness: 1.5 mm to 3 mmWidth: 300 mm to 600 mm Length: Available in roll form or length cut to order PTFE Etched Sheets: When you need to glue PTFE to the surface of another material such as stainless steel, a process called "etching" is required. Typical applications would include the lining of chemical process tanks or other equipment used in caustic environments. We can provide customized (special) sizes on request; PTFE Sheets - Thick (Rigid) Sheets Standard Sizes: Thickness: 1.5 mm to 30 mmSizes: 300 mm width x 300 mm length1000 mm width x 1000 mm length We provide customized (special) sizes on request; PTFE Special Items(Moulded and Machined Finished Products) It is often more efficient to use moulded semi - finished products to avoid excessive machining of relatively expensive materials and also to reduce machining labor and time. The tooling costs are generally very low. We provide customized (special) items on request;

Availability:

POLYPOR^TM- Porous Plastic Filter Disc of Polypropylene, PTFE, HDPE, Cellulose Acetate, and Polystyrene ranges from 5 to 250 microns. Form of rods, hollow pipes, sheets and joined parts of porous with a non-porous plastic and can be moulded as per your drawing and dimension Material: POLYPOR^TMmakes its porous plastics from many thermo-plastic polymers including:

• Polypropylene (FGX)
• Polyethylene (DMF)
• Polyvinylidene Fluoride (PVF)
• Ethylene-Vinyl Acetate (EVA)
• Styrene Acrylo Nitrite (SAN)
• Polyurethane (PUR)
• Polytetrafluoroethylene (TFE)
• Polystyrene (PTR)
• Cellulose Acetate (CAB)

Availibility

:

• Pore size from 0.1 to 120 micron
• Thicknesses from 2 mm to 15 mm are available.
• Different shapes are possible, square, rectangular, round or oval
• Custom sized for your application - No cutting, no waste
• Fluidized bed and Battery Venting
• Hydrophilic, Hydrophobic and Sealing Type

These Porous Polyethylene vent plugs ranging from 5 to 10 micron are used for iv venting. These vent plugs are used in conjunction with iv lines to release venus pressure in the Lines. These pressed into place in a "y" connector near the skin puncture site. These can also be pressed into an interferance fit to stablize pressure inside of a container. These can also be purchased with a self sealing polymer That swells upon contact with liquids for applications requiring rapid liquid sealing Protection.

linex produces Porous POLYPOR by using several polymer groups of plastics and proprietary manufacturing technologies. Expertise and specialties in chemical, mechanical, industrial, biological and research engineering which has led to the development and refinement of production techniques enabling us to economically supply simple or complex custom made shapes in a range of sizes, porosities, with colours impregnated Activated Charcoal of Iodized and silver as well have the expertise to work with you to ensure the right match between our capabilities and your requirements. Porous POLYPOR also offers the features like dimensionally stable, uniform pore size, smooth surface, light weight, resistance to shocks, free from rot, corrosion, odourless, tasteless and non-toxic, conform to use with food products, easy to machine, can be welded and glued, high dielectric constant, hydrophilic, custom moulding availability, Tortuous filtration path as a "depth filter". Applications: Porous POLYPOR plastics are used throughout industry, medicine and the home; for applications ranging from noise reduction to air, water and chemical filtration; from marker pen tips to automotive battery safety vents; from surgical implants to clinical laboratory filters.