PTFE Coating materials have the highest operating temperature of any Fluoropolymer and have extremely low coefficient of friction coupled with good abrasion and chemical resistance. PTFE Coatings are either single or two-coat systems, comprising of a primer and topcoat and for premium systems three coat systems are available. PTFE coatings are available in aqueous based forms. PTFE coatings can provide the solution to many engineering questions particularly those relating to non-stick (release), low friction, chemical resistance and wear resistance, there are many other solutions that can be resolved by the application of PTFE coatings
Properties:

• Non-stick, Non-wetting, Anti-static, self-lubricating, heat-resistant properties
• Thickness from 25 microns to 50 microns
• Very low adhesion to most materials, excellent water repellent,
• Low-coefficient of friction, chemical inertness, and unusual thermal stability.
• Temperature resistance -100^oC to +260^oC.
• Not attacked by corrosive chemical or strong solvent

PTFE coatings provides excellent Non-Stick properties, these materials have the highest operating temperature of any Fluoropolymer and have extremely low coefficient of friction coupled with good abrasion and chemical resistance. These coatings are either single or two-coat systems, comprising of a primer and topcoat and for premium systems three coat systems are available. PTFE coatings are available in aqueous based forms. PTFE coatings can provide the solution to many engineering questions particularly those relating to non-stick (release), low friction, chemical resistance and wear resistance, there are many other solutions that can be resolved by the application of PTFE coatings PTFE Coating surfaces are both oleo phobic and hydrophobic, they are not readily wet, cleanup is easier, more through and in many cases self cleaning. Self-lubricating, Heat Resistant properties. Temperature resistance upto 250 Degree C which requires no special precaution. The coefficient of friction is generally in the ranger of 0.05 to 0.20, depending on the load sliding speed.

The nature of the pharmaceutical business sector demands a higher profile and that is why many companies look to BLINEX FILTER-COAT PVT LTD Coatings and our services to meet their expectations. PTFE coatings provide a barrier coating to ensure that product does not come into contact with the base substrate, particularly when formulating powders for pharmaceutical applications, materials such as high molecular weight PFA is an ideal candidate for this purpose, but there are others that have a FDA compliance statement

Coatings made from Halar provide excellent chemical resistance and good electrical properties to equipment operating in temperatures from -50C to +175C. Suitable for full vacuum applications, Halar coatings combine outstanding abrasion resistance with excellent impact strength. Coatings made from Halar are also available to comply with FDA regulations. Thickness of coating from 800 microns to 1000 microns.

Temperature Resistance - 50 Degree C to + 175 Degree C Features:

• High dielectric strength
• Excellent resistance to weathering
• Ability to self extinguish
• Abrasion resistance

BLINEX FILTER COAT PVT LTD offers a full line of ECTFE / FEP / PFA / PVDF / Fluoropolymer coatings and linings designed to help today's processing professionals face the challenges of protecting large and complex containment vessels and related piping systems. Our products and services resist corrosion, abrasion, and wear, while maintaining nonstick and high purity characteristics of equipment used in the chemical, microelectronic, oil and gas, and pharmaceutical processing industries. BLION^TM-A pinhole free homogenous thick coating of PVDF (KYNAR), FEP, PFA, ETFE ( TEFZEL )/ ECTFE (HALAR). It has the extraordinary chemical resistance on chemical equipments parts. Thickness from 800 to 1000 microns. Any articles of intricate configurations can be processed. Properties:

• Temperature ranges from-100^oC to +260^oC.
• Withstands impact force and elongation up to 30%.
• Non-stick, Non-toxic, Electrical insulation, Anti-static and Release-surface.
• Resistant to almost all chemicals and solvents

PTFE COATINGShas got good non-stick, self-lubricating, heat resistant and chemical fume resistance.

The coefficient of friction is extremely low (the lowest of all the fluoropolymers).

PTFE coatings are FDA compliant for direct food contact uses.

Operating temperatures are generally - 100C To + 260C.

Other Characteristics include good abrasion resistance and Non-wetting.

PTFE coating application thicknesses can range from 25 microns to 50 microns.

PTFE COATINGShas got good non-stick, self-lubricating, heat resistant and chemical fume resistance.

The coefficient of friction is extremely low (the lowest of all the fluoropolymers).

PTFE coatings are FDA compliant for direct food contact uses.
Operating temperatures are generally - 100C To + 260C.

Other Characteristics include good abrasion resistance and Non-wetting.

PTFE coating application thicknesses can range from 25 microns to 50 microns.

Coatings made fromHalar provide excellent chemical resistance and good electrical properties to equipment operating in temperatures from -50C to +175C.

Suitable for full vacuum applications, Halar coatings combine outstanding abrasion resistance with excellent impact strength.

Coatings made from Halar are also available to comply with FDA regulations.
Thickness of coating from 800 microns to 1000 microns.

Temperature Resistance - 50 Degree C to + 175 Degree C

Features:

• High dielectric strength
• Excellent resistance to weathering
• Ability to self extinguish
• Abrasion resistancev

BLINEX FILTER COAT PVT LTDoffers a full line ofECTFE / FEP / PFA / PVDF / Fluoropolymer coatings and liningsdesigned to help today's processing professionals face the challenges of protecting large and complex containment vessels and related piping systems.

Our products and services resist corrosion, abrasion, and wear, while maintaining nonstick and high purity characteristicsof equipment used in the chemical, microelectronic, oil and gas, and pharmaceutical processing industries.

BLION^TM-A pinhole free homogenous thick coating of PVDF (KYNAR), FEP, PFA, ETFE ( TEFZEL )/ ECTFE (HALAR).

It has the extraordinary chemical resistance on chemical equipments parts.
Thickness from 800 to 1000 microns.

Any articles of intricate configurations can be processed.
Properties:

• Temperature ranges from-100^oC to +260^oC.
• Withstands impact force and elongation up to 30%.
• Non-stick, Non-toxic, Electrical insulation, Anti-static and Release-surface.
• Resistant to almost all chemicals and solvents

PTFE Coating materials have the highest operating temperature of any Fluoropolymer and have extremely low coefficient of friction coupled with good abrasion and chemical resistance. PTFE Coatings are either single or two-coat systems, comprising of a primer and topcoat and for premium systems three coat systems are available. PTFE coatings are available in aqueous based forms. PTFE coatings can provide the solution to many engineering questions particularly those relating to non-stick (release), low friction, chemical resistance and wear resistance, there are many other solutions that can be resolved by the application of PTFE coatings
Properties:

• Non-stick, Non-wetting, Anti-static, self-lubricating, heat-resistant properties
• Thickness from 25 microns to 50 microns
• Very low adhesion to most materials, excellent water repellent,
• Low-coefficient of friction, chemical inertness, and unusual thermal stability.
• Temperature resistance -100^oC to +260^oC.
• Not attacked by corrosive chemical or strong solvent

PTFE coatings provides excellent Non-Stick properties, these materials have the highest operating temperature of any Fluoropolymer and have extremely low coefficient of friction coupled with good abrasion and chemical resistance. These coatings are either single or two-coat systems, comprising of a primer and topcoat and for premium systems three coat systems are available. PTFE coatings are available in aqueous based forms. PTFE coatings can provide the solution to many engineering questions particularly those relating to non-stick (release), low friction, chemical resistance and wear resistance, there are many other solutions that can be resolved by the application of PTFE coatings PTFE Coating surfaces are both oleo phobic and hydrophobic, they are not readily wet, cleanup is easier, more through and in many cases self cleaning. Self-lubricating, Heat Resistant properties. Temperature resistance upto 250 Degree C which requires no special precaution. The coefficient of friction is generally in the ranger of 0.05 to 0.20, depending on the load sliding speed.

The nature of the pharmaceutical business sector demands a higher profile and that is why many companies look to BLINEX FILTER-COAT PVT LTD Coatings and our services to meet their expectations. PTFE coatings provide a barrier coating to ensure that product does not come into contact with the base substrate, particularly when formulating powders for pharmaceutical applications, materials such as high molecular weight PFA is an ideal candidate for this purpose, but there are others that have a FDA compliance statement

Coatings made from Halar provide excellent chemical resistance and good electrical properties to equipment operating in temperatures from -50C to +175C. Suitable for full vacuum applications, Halar coatings combine outstanding abrasion resistance with excellent impact strength. Coatings made from Halar are also available to comply with FDA regulations. Thickness of coating from 800 microns to 1000 microns.

Temperature Resistance - 50 Degree C to + 175 Degree C Features:

• High dielectric strength
• Excellent resistance to weathering
• Ability to self extinguish
• Abrasion resistance

BLINEX FILTER COAT PVT LTD offers a full line of ECTFE / FEP / PFA / PVDF / Fluoropolymer coatings and linings designed to help today's processing professionals face the challenges of protecting large and complex containment vessels and related piping systems. Our products and services resist corrosion, abrasion, and wear, while maintaining nonstick and high purity characteristics of equipment used in the chemical, microelectronic, oil and gas, and pharmaceutical processing industries. BLION^TM-A pinhole free homogenous thick coating of PVDF (KYNAR), FEP, PFA, ETFE ( TEFZEL )/ ECTFE (HALAR). It has the extraordinary chemical resistance on chemical equipments parts. Thickness from 800 to 1000 microns. Any articles of intricate configurations can be processed. Properties:

• Temperature ranges from-100^oC to +260^oC.
• Withstands impact force and elongation up to 30%.
• Non-stick, Non-toxic, Electrical insulation, Anti-static and Release-surface.
• Resistant to almost all chemicals and solvents

PTFE COATINGShas got good non-stick, self-lubricating, heat resistant and chemical fume resistance.

The coefficient of friction is extremely low (the lowest of all the fluoropolymers).

PTFE coatings are FDA compliant for direct food contact uses.

Operating temperatures are generally - 100C To + 260C.

Other Characteristics include good abrasion resistance and Non-wetting.

PTFE coating application thicknesses can range from 25 microns to 50 microns.

PTFE COATINGShas got good non-stick, self-lubricating, heat resistant and chemical fume resistance.

The coefficient of friction is extremely low (the lowest of all the fluoropolymers).

PTFE coatings are FDA compliant for direct food contact uses.
Operating temperatures are generally - 100C To + 260C.

Other Characteristics include good abrasion resistance and Non-wetting.

PTFE coating application thicknesses can range from 25 microns to 50 microns.

Coatings made fromHalar provide excellent chemical resistance and good electrical properties to equipment operating in temperatures from -50C to +175C.

Suitable for full vacuum applications, Halar coatings combine outstanding abrasion resistance with excellent impact strength.

Coatings made from Halar are also available to comply with FDA regulations.
Thickness of coating from 800 microns to 1000 microns.

Temperature Resistance - 50 Degree C to + 175 Degree C

Features:

• High dielectric strength
• Excellent resistance to weathering
• Ability to self extinguish
• Abrasion resistancev

BLINEX FILTER COAT PVT LTDoffers a full line ofECTFE / FEP / PFA / PVDF / Fluoropolymer coatings and liningsdesigned to help today's processing professionals face the challenges of protecting large and complex containment vessels and related piping systems.

Our products and services resist corrosion, abrasion, and wear, while maintaining nonstick and high purity characteristicsof equipment used in the chemical, microelectronic, oil and gas, and pharmaceutical processing industries.

BLION^TM-A pinhole free homogenous thick coating of PVDF (KYNAR), FEP, PFA, ETFE ( TEFZEL )/ ECTFE (HALAR).

It has the extraordinary chemical resistance on chemical equipments parts.
Thickness from 800 to 1000 microns.

Any articles of intricate configurations can be processed.
Properties:

• Temperature ranges from-100^oC to +260^oC.
• Withstands impact force and elongation up to 30%.
• Non-stick, Non-toxic, Electrical insulation, Anti-static and Release-surface.
• Resistant to almost all chemicals and solvents