Our Products
Specifications
MAIN GENERAL PARAMETERS | |
Diameter of Unwinding Cloth | 1200 mm Maximum |
Width of Unwinding Cloth | 300 to 850 mm Maximum |
Cutting Length | 500 to 1300 mm Adjustable |
Cutting Length Accuracy | ± 1 mm |
Production Capacity | 30 – 40 Bag/Minute (depending upon the bag size). |
Electric Control | Electric Control through servo motors & inventors Along with Touch Screen. |
Power consumption capacity | Machine Connected Load 8.49 KW (Approx. 12 hp) |
Machine Dimension (L x W x H) | 17′ X 17′ X 5′ feet |
Machine Net Weight | |
CUTTING & TRANSFER UNIT | |
Feeding Speed | Synchronized with Production Settings. |
Bag Mouth Auto Opening | Accurate Bag mouth opening through reversing grip shaft. |
90o Transfer | Clipper Device for well gripping |
FOLDING, STITCHING & STAKING UNIT | |
Stitching Unit (Double Needle) | High Speed Stitching Machine (Can be Customized) |
Stitching Range | 11 – 14 mm |
Distance Between Two Needles | 7 mm |
Folding Device | Single Fold & Double Fold |
Folding Width | 20 to 25 mm Adjustable |
Bag Delivery | Counting Stack type Belt Conveyor |
EPC (Edge Position Controller) | Fabric edge position control by web guide system |
Print Mark Sensor | Provided with the Machine for Pre-printed fabric rolls. |
OPERATIONAL REQUIREMENT | Power Supply 440 Volts, 3 Phases, 50 C/S 5 HP Air Compressor, Thread (1000-1200 Denier) |
Features :
Specifications
MAIN GENERAL PARAMETERS | |
Machine types | Single/Two/Three and Four color printing machines |
Printing area | Upto width 28”, Length 48" The printing area can be custom designed |
Bag Size | Width 32" length 52" However sizes can be modified as per requirements |
Electrical motor | 1 HP for single color 2 HP for 2 and 3 color machines and 3 HP for 4 color machines |
Area required | 1 color 09 x 4 feet 2 color 14 x 4 feet 3 color 18 x 4 feet 4 color 22 x 4 feet |
Printing capacity | 25 to 40 bags per minute |
Stereo | Rubber stereos with minimum recommended thickness of 5 mm |
ADDITIONAL FEATURES | |
A.C Drive | AC Drive System to regulate / to do variation in speed . It will increase life of Machine parts. Specially gears. It reduces Stereo, Setting time Consumption. |
Stopper Attachement | Draw roller actuated by adjustable cam for synchronizing with STOPER ATTACHMENT TO PRINT AT EXACT POSITION OF BAG (i.e. you can set exact margin) there by |
Bag Gripper | Bag Hold down tapes ensures thath the bag is gripped from take up to the point of release |
Ink Drying Heater | One unit of finned heaters 1 kw. Air is forced Down through the Fined heater by blower. |
Bag Counter Meter | A digital Counter meter with Sensor & beeper shall be fitted. |
Driven (Most Important) | All the 2-Printing stations shall be gear driven by right angle hellical Gears. This ensures 0-0 Ragistrations between Colors. |
Specifications
Machine types | Double or Four Thread Chain Stitching Machines |
Speed | 800-900 Bags/hr |
Stitch width | 5-9mm |
Needle | DRX2-26(Orgen/Groze-BECKRT) / DRX2-26(Orgen) |
Brake Motor | 3 Phase 4 Pole 0.37 KW (Depend on Conveyor Speed) |
Auto Start & Stop | Photo-Switch |
Cutter Type | Air cylinder driven guillotine cutter |
Air Pressure | 6 Kg/cm2 |
Air Consumption | 250 Ltr/min |
Photo Cell Range | Upto 500mm |
Infeed system motor | 0.25 H.P., 3 Phase, 4 Pole (Depend on Conveyor Speed) |
Drive Motor | For sewing head 0.5 H.P., 3 Phase |
Lubrication System | Manual Oil Feed, Oiler or Auto Oiler. |
RPM | 1400 |
Column | Automatic with Control Panel |
Additional Equipment’s | Liner Heat Sealing Machine, Bag Infeed Device |
Type of Material for Use | PP, Paper, Hessian, Cotton, Jute fabric |
Conveyor Type | Wooden Slat / Belt (PVC & Rubber)/ UHM Slat |
Conveyor Dimension (L x W x H) | 2000mm x 390mm x275mm (Customize size is also available) |
Speed | 800-900 Bags/hr |
Drive Motor | For Two meter standard 0.5HP rest as per size |
Wooden Slat Dimension | 350 mm x 35 mm x 65 mm |
Features :