Pass through boxesis designed to minimize traffic and contamination entry into the clean room. Enable movement of materials to and from cleanroom. Acts as an air lock device to prevent cross contamination between two adjacent environments.

*Available in Static & Dynamic Models.

Air showers are installed before the entry of a controlled environment to avoid contamination through personnel entry. Air Showers employ concentrated airflows to lift off contamination such as lint, dirt, dust etc., while an individual walks through a specially constructed chamber.

The high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter.

Contaminated air then flows through sidewalls of the air shower and flows through pre filters and final HEPA filters.

Powder Dispensing booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing etc., without risk to the operator or environment. The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operators breathing zone.The air forced downwards is extracted at low level into the booths filteration system where dust particles are contained at each level of filteration prior to being re-circulated back into the booths air stream.

Pass through boxesis designed to minimize traffic and contamination entry into the clean room. Enable movement of materials to and from cleanroom. Acts as an air lock device to prevent cross contamination between two adjacent environments.

*Available in Static & Dynamic Models.

Air showers are installed before the entry of a controlled environment to avoid contamination through personnel entry. Air Showers employ concentrated airflows to lift off contamination such as lint, dirt, dust etc., while an individual walks through a specially constructed chamber.

The high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter.

Contaminated air then flows through sidewalls of the air shower and flows through pre filters and final HEPA filters.

Powder Dispensing booths are used to control the hazardous emissions of powders, dust or vapors during powder dispensing, product sampling, or bag dispensing etc., without risk to the operator or environment. The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operators breathing zone.The air forced downwards is extracted at low level into the booths filteration system where dust particles are contained at each level of filteration prior to being re-circulated back into the booths air stream.