Our Products
Our product range contains a wide range of Micropipette Digital Variable, Circulating Water Bath Chiller, Glycol Bath Circulator, Hplc 6002b High Pressure Gradient System and Hplc 6002 Isocratic Intelligent
Model No. | Volume Setting | Volume range (µl) | Increments (µl) |
BTI-BDVP-2 | DIGITAL SETTING | 0.2 | 0.002 |
BTI-BDVP-10 | 0.5~10 | 0.01 | |
BTI-BDVP-20 | 2~20 | 0.02 | |
BTI-BDVP-100 | 10~100 | 0.1 | |
BTI-BDVP-200 | 20~200 | 0.2 | |
BTI-BDVP-1000 | 100~1000 | 1 | |
BTI-BDVP-5000 | 1000~5000 | 10 | |
BTI-BDVP-10 ml | 1000~10000 | 10 |
Model | BTI/KVB-C18 | BTI/ KVB-C38 |
Inner Size | 300X200X300mm | 400X275X350mm |
Size | 4 Viscometers | 6/8 Viscometers |
Temperature Range | 10°C to 150°C | |
Temperature sensor | PT-100 | |
Temp. Controller | PID Temp Controller w/ Accuracy ±0.5°C | |
Construction | - Inner chamber: SS 304 /316 - Outer chamber: MS powder coated - Insulation: Glass wool - Window: 2 side toughened glass windows - Light: 1 tube light |
|
Heating System | Heating by tubular Heater vertically fitted in side chamber (2.0 K.W) | |
Stirring | Stirring by S.S. shaft fitted with Motor | |
Power | 230 Volts 50 Hz | |
Accessories | Viscosity holder, universal type | |
Optional Accessories | Glass U tube Viscometer Size A, B. C, D, E, F, G, H Reserve Flow Viscometer BS/IP/RF NO 2,3,4,5,6,7,8,9,10,11 Oswald Direct Viscometer ASTM-445-467 Size 50-500 Suspended level Viscometer BS/IP/SI : 1:1A, 2 : 2A, 3: 3A, 4: 4A, 5: 5A, Cannon Fenske Viscometer ASTM 445 BS/IP/CD 100-600 Cannon Fenske for opaque liquids Viscometer ASTM 445 BS/IP/CD 100-600 Thermometer Viscometer 0-200ºC |
|
Optional | - High / low temperature baths. - Fluorescent lamp - IQ, OQ, PQ & DQ documentation - Voltage stabilizer |
Model | BTI/KVB-H18 | BTI/ KVB-H38 |
Inner Size | 300X200X300mm | 400X275X350mm |
Size | 4 Viscometers | 6/8 Viscometers |
Temperature Range | 5°C above ambient to 150°C | |
Temperature sensor | PT-100 | |
Temp. Controller | PID Temp Controller w/ Accuracy ±0.5°C | |
Construction | - Inner chamber: SS 304 /316 - Outer chamber: MS powder coated - Insulation: Glass wool - Window: 2 side toughened glass windows - Light: 1 tube light |
|
Heating System | Heating by tubular Heater vertically fitted in side chamber (2.0 K.W) | |
Stirring | Stirring by S.S. shaft fitted with Motor | |
Power | 230 Volts 50 Hz | |
Accessories | Viscosity holder, universal type | |
Optional Accessories | Glass U tube Viscometer Size A, B. C, D, E, F, G, H Reserve Flow Viscometer BS/IP/RF NO 2,3,4,5,6,7,8,9,10,11 Oswald Direct Viscometer ASTM-445-467 Size 50-500 Suspended level Viscometer BS/IP/SI : 1:1A, 2 : 2A, 3: 3A, 4: 4A, 5: 5A, Cannon Fenske Viscometer ASTM 445 BS/IP/CD 100-600 Cannon Fenske for opaque liquids Viscometer ASTM 445 BS/IP/CD 100-600 Thermometer Viscometer 0-200ºC |
|
Optional | - High / low temperature baths. - Fluorescent lamp - IQ, OQ, PQ & DQ documentation - Voltage stabilizer |
Model | Temp. Range (℃) | Temp. Stability (℃) | Display Resolution (℃) | Volume(mm) | Depth(mm) | Pump Flow (L/min) | Top Opening Dimen(mm) | Drain | NW (kg) | Packing Size(mm) |
BTI-0506 | -5~100 | ±0.005~±0.02 | 0.01/0.001 | 250×200×150 | 140 | 6 | 180×140 | √ | 35 | 515*450*600 |
BTI-1006 | -10~100 | ±0.005~±0.02 | 0.01/0.001 | 250×200×150 | 140 | 6 | 180×140 | √ | 35 | 515*450*600 |
BTI-2006 | -20~100 | ±0.005~±0.02 | 0.01/0.001 | 250×200×150 | 140 | 6 | 180×140 | √ | 33 | 450*430*810 |
BTI-3006 | -30~100 | ±0.005~±0.05 | 0.01/0.001 | 250×200×150 | 140 | 6 | 180×140 | √ | 33 | 450*430*810 |
BTI-4006 | -40~100 | ±0.005~±0.05 | 0.01/0.001 | 250×200×150 | 140 | 6 | 180×140 | √ | 36 | 505*480*1015 |
BTI-DK-3001 | BTI-DK-4001 | |
Temperature Range for Constant Oven | 10℃ ~ 200℃ above to room temperature, (1℃ and 1℃ to increase) | 10℃ ~ 200℃ above to room temperature, (1℃ and 1℃ to increase) |
Valve Box Temperature Range | 10℃ ~ 200℃ above to room temperature, (1℃ and 1℃ to increase) | 10℃ ~ 200℃ above to room temperature, (1℃ and 1℃ to increase) |
Temperature Range For Sample Transfer Pipeline | 10℃ ~ 200℃ above to room temperature, (1℃ and 1℃ to increase)< | 10℃ ~ 200℃ above to room temperature, (1℃ and 1℃ to increase)< |
Quantitative Tube Volume | 1ml | 3mL |
Sample Bottle Units | 9 Unites | 4 Unites |
Sample Bottle Value | 20ml | 150mL |
Repeatability | RSD≤5% | RSD≤5% |
Power | 800W | 800W |
Weight | 20Kg | 20Kg |
Type | Detail | Holes | Dimension (mm) |
VMT-A | Φ10mm tube block | 50 | 245×132×45 mm |
VMT-B | Φ12mm tube block | 50 | 245×132×45 mm |
VMT-C | Φ13mm tube block | 50 | 245×132×45 mm |
VMT-D | Φ16mm tube block (15ml tube) | 50 | 245×132×45 mm |
VMT-E | Φ25mm tube block | 15 | 245×132×45 mm |
VMT-F | Φ29mm tube block (50ml tube) | 15 | 245×132×45 mm |
VMT-H | Tray Pad Set (Upper & Lower)- | 305×178.5×25 mm |
MODEL BTI | LC-350 | LC-750 | LC-900 | LC-1200 | LC-1500 |
CONTROL SYSTEM | Microprocessor control & Large | ||||
TEMPERATURE RANGE | 2°C -8°C | ||||
TEMPERATURE ACCURACY | 0.1°C | ||||
DIGITAL DISPLAY | YES | ||||
LOCK | YES | ||||
NO OF SHELVES | 3,4,6,8 SHELVES | ||||
WHEELS | YES | ||||
NO OF DOORS | 2 /Solid | ||||
Refrigerant | R13 a, CFC Free | ||||
Power supply | AC 220 V ±10%, 50/60HZ | ||||
Defrost | Auto defrost | ||||
Condenser and Evaporator | High Efficiency air cooled condenser, made of copper | ||||
CAPACITY Liter | 350 Liter | 750 Liter | 900 Liter | 1200 Liter | 1500 Liters |
Make BTI | VDO-45 | VDO-95 | VDO-125 | VDO-224 | VDO-336 |
Technical Matrix For | Lab | ||||
Temperature Sensitivity | ± 0.5°C | ||||
Temperature range. | RT +5 to 250 °C | ||||
Temperature accuracy | ± 1 °C | ||||
Spatial Deviation | ± 0.5 °C | ||||
Readability | 0.5°C | ||||
Selves | 2Nos | ||||
Temperature Sensor | Double sensor PT 100 | ||||
Uniformity | ±1.0°C at 200°C or better. | ||||
Temperature Controller | Digital Controller | ||||
Temperature Variation | +/1 deg C. | ||||
Display | LED/LCD | ||||
Heat Load | 3 KW | ||||
Nominal voltage | 220-230 Volts, 50Hz Single Phase | ||||
Safety Device | Over temperature limiter switch prevents overheating | ||||
Type | Adjustable memmert type. | ||||
Blower | Fan Motor Blower is mounted at the Rear wall for uniform Temperature | ||||
Inner chamber size | 355 x 355 x 355 mm | 455 x 455 x 455 mm | 455 x 455 x 605 mm | 605 x 605 x 605 mm | 605 x 605 x 910 mm |
Make BTIDO-45DO-95DO-125DO-224DO-336Technical Matrix ForLabTemperature Sensitivity± 0.5°CTemperature range.RT +5 to 250 °CTemperature accuracy± 1 °CSpatial Deviation± 0.5 °CReadability0.5°CSelves2Nos Temperature SensorDouble sensor PT 100Uniformity±1.0°C at 200°C or better.Temperature Variation+/1 deg C.DisplayLED/LCDHeat Load3 KW Nominal voltage220-230 Volts, 50Hz Single PhaseSafety DeviceOver temperature limiter switch prevents overheatingTypeAdjustable memmert type.BlowerFan Motor Blower is mounted at the Rear wall for uniform TemperatureInner chamber size355 x 355 x 355 mm455 x 455 x 455 mm455 x 455 x 605 mm605 x 605 x 605 mm605 x 605 x 910 mm
Model | MODEL: BTI-GE-HC | MODEL: BTI-GE-MC |
High Output Voltage | 400-2500V | 400-2500V |
Low Output Voltage | 100-450 V | 100-450 V |
High Voltage Capacitor | 1,5,6,25,30,31,UF | 1,5,6,25,30,31,UF |
Low voltage Capacitor | 100 UF, 125UF, 150UF-- 1675UF, One grades of 25UF | 100 UF, 125UF, 150UF-- 1675UF, One grades of 25UF |
Resistance | 50, 100, 150, 1600:-8 total 30 grades | 50, 100, 150, 1600:-8 total 30 grades |
Operation system | Hand control | Microcomputer Control |
Output Wave form | With RC Time constant of the Exponential decay of wave | With RC Time constant of the Exponential decay of wave |
Dimension | 36.8*31.6*22.9 (cm) | 36.8*31.6*22.9 (cm) |
Net Weight | 10.5 kg | 10.5 kg |
Packing size | 480*420*280 mm | 480*420*280 mm |
Model | BTI-VA-22 | BTI-VA-40 | BTI-VA-50 | BTI-VA-78 | BTI-VA-98 | BTI-VA-187 |
Make | BIO GENE | |||||
Technical Matrix For | Lab | |||||
Temperature range | 115ºC-121ºC | |||||
Basket | 1 | |||||
Temperature Sensor | PT 100 | |||||
WORKING PRESSURE | 15 to 22 p.s.i | |||||
Inner chamber | Stainless steel sheet (SS 304 Grade) | |||||
Outer chamber | Mild steel sheet | |||||
Temperature Controller | Microprocessor Based Programmable Controller | |||||
Heat Load | 6 KW/ 9KW/ 10KW/ 10KW/ 12KW | |||||
Nominal Voltage | 220-230 Volts, 50Hz Single Phase | |||||
CAPACITY-LTRS | 22 | 40 | 50 | 78 | 98 | 187 |
SIZE | 250 X 450mm | 300 X 500mm | 350 X 550mm | 400 X 600mm | 450 X 600mm | 550 X 750mm |
Model BTI | BSC-966 | BSC-1366 | BSC-1866 |
Cabinet Internal Size (W*D*H) | 900*600*660mm | 1340*600*660mm | 1800*600*660mm |
External Cabinet MOC | Galvanized powder coated with special coating | ||
Tested Opening | Safety Height ≤200 mm (8") | ||
Light intensity | 800 lux | ||
Temperature | 0-50ºC | ||
Humidity | 15-90% | ||
Operating temperature | 10-40ºC | ||
Relative humidity | 15-90% | ||
Max Opening | 500mm (20") | ||
Inflow Velocity | 0.53±0.025 m/s | ||
Down flow Velocity | 0.33±0.025 m/s | ||
HEPA FILTER size | 4 x 2 x 6” | ||
Pre-Filter | Washable | ||
HEPA filter efficiency | 99.97% at 0.3 micron the protection of class 100 or exceeding Class 100 standard 209 E or equivalent ISO within work area. | ||
HEPA Filter | 99.999% efficient at 0.3 Micron. Filter life indicator. Grde:13 rating type: mini –pleat HEPA filter separator less | ||
Front door shas panel | Motorized. Two- layer laminated toughened transparent glass scratch resistant sheet glass ≥5mm. Anti UV | ||
Noise | NSF49≤70dB / EN12469≤58 Db | ||
UV Lamp | 4 Feet, 15 watt, UV timer, UV life indicator, emission of 253.7 nanometers for most efficient decontamination. | ||
Fluorescent Lamp | 40W× 2 | ||
Illumination | Fluorescent tubes with diffusers/LED fitting | ||
Consumption | 1200W | ||
Waterproof Sockets | Two, total load of two sockets: 500W | ||
Display | LCD display: exhaust filter and downflow filter pressure, filterand UV lamp working time, inflow and downflow velocity, filter life, humidity and temperature, system working time etc | ||
Control System | Microprocessor | ||
Airflow System | 0% air re-circulation, 100% air exhaust | ||
Visual and Audio Alarm | Filter replacement, window over height, abnormal air flow velocity. | ||
Exhaust Duct | 4 meters PVC duct, Diameter:300mm | ||
Main body | Side and rear panel Electro galvanized steel or mild steel oven baked epoxy powder coated mat finish. | ||
Material | Work Zone: 304 stainless steel | ||
Work Surface table & Height | Worktable stainless steel 316 grade and 750mm height | ||
Caster | Foot master caster | ||
Power Supply | 230V±10%, 50Hz | ||
Standard Accessory | Fluorescent lamp, UV lamp*2 ,base stand, remote control, foot switch, exhaust blower, exhaust duct, drain valve, water proof sockets*2, pipe strap*2. | ||
Optional Accessory | Water and gas tap | ||
Gross Weight | 408kg | ||
Pre filter | Media: synthetic, non-woven polyester fibers Casing : GL with PU coated frame Retention: 8 micron & above Efficiency: 98% |
||
Power Input | 220-240V and 50Hz |
MODEL | LAF-V-22 | LAF-V-32 | LAF-V-42 | LAF-V-62 | LAF-V-82 |
Working Size | 2’ x 2’ x 2’ | 3’ x 2’ x 2’ | 4’ x 2’ x 2’ | 6’ x 2’ x 2’ | 8’ x 2’ x 2’ |
Size of HEPA Filter | 2’ x 2’ x 6’ | 3’ x 2’ x 6’ | 4’ x 2’ x 6’ | 3’ x 2’ x 6’ | 4’ x 2’ x 6’ |
No. of HEPA Filter | 1 | 1 | 1 | 2 | 2 |
Illumination | 1 x 20w | 1 x 20w | 2 x 40w | 2 x 40w | 4 x 40w |
MODEL | LAF-H-22 | LAF- H-32 | LAF-H-42 | LAF-H-62 | LAF-H-82 |
Working Size | 2’ x 2’ x 2’ | 3’ x 2’ x 2’ | 4’ x 2’ x 2’ | 6’ x 2’ x 2’ | 8’ x 2’ x 2’ |
Size of HEPA Filter | 2’ x 2’ x 6’ | 3’ x 2’ x 6’ | 4’ x 2’ x 6’ | 3’ x 2’ x 6’ | 4’ x 2’ x 6’ |
No. of HEPA Filter | 1 | 1 | 1 | 2 | 2 |
Illumination | 1 x 20w | 1 x 20w | 2 x 40w | 2 x 40w | 4 x 40w |
MODEL | BTI-PCR-4830G | BTI-PCR-96G |
Capacity | 48 x 0.2ml+30x 0.5ml | 96 x 0.2ml |
Make | Bio Gene | |
Temperature Range | 0-105ºC | |
Max heating Rate | 5ºC/S | |
Max Cooling Rate | 4ºC/S | |
Uniformity & Accuracy | ≤±0.1ºC | |
Display Resolution | 0.1ºC | |
Temperature Control | Block/Tube | |
Ramping Rate Adjustable | 0.1-5ºC | |
Gradient Uniformity | ≤±0.2ºC | |
Gradient Accuracy | ≤±0.2ºC | |
Gradient Temp. Range | 30-100ºC | |
Gradient Spread | 1-30ºC | |
Hot Lid Temperature | 30-110ºC | |
Hot Lid Height Adjustable | Steeples Adjustable | |
Number of Programme | 10000 + (USB FLASH) | |
Max No. of step | 30 | |
Max No. of cycle | 99 | |
Time Increment / Decrement | 1 Sec – 9 min 59 sec | |
Temp Increment / Decrement | 0.1 - 9.9ºC | |
Pause function | Yes | |
Auto data Protection | Yes | |
Hold at 4ºC | Forever | |
Print , LAN to computer | Yes | |
LCD display | Touch Screen, 8inch, 800 x 600 Pixels, TFT | |
Communication | USB2.0, LAN | |
Power Supply | 85 – 264 VAC, 47 – 63 Hz, 600 W | |
Dimension (L x W x H) | 380 x 240 x 260mm | |
Weight | 9 Kg |
MATRIXBTI-TPMP-N10BTI-TPMP-N12BTI-TPMP-N18No-load Temperature<-56℃<-56℃<-56℃Freeze Area0.08 m20.12 m20.18 m2Plate Load Capacity1 L1.5 L2 LAbility to Capture Water3 Kg4Kg6KgVacuum Degree<10Pa<10Pa<10PaMachine DimensionW450×D580×H(380+450)mmW600×D460×H(720+450)mmW670×D530×H(800+450)mmSample Tray SizeØ 3×180 mm4×Φ200mm4×Φ240mmPower950W950W1300WPower Supply110V/60Hz or 220V/50Hz110V/60Hz or 220V/50Hz110V/60Hz or 220V/50Hzinterlayer spacing70 mm70 mm70 mmCold trap sizeØ215×160 mmØ215×216 mmØ270×410 mmThe number of
Flat bottom bottlesØ22: 165
Ø16: 285
Ø12: 560Ø22: 260
Ø16: 480
Ø12: 920Ø22: 360
Ø16: 740
Ø12: 1320 N.W./ G.W100KG/115KG110KG/125KG120KG/135KGPacking Size1040*660*640mm940*720*880 mm760*1000*1040mm
MODEL NO | WORKING TEMPERATURE (°C) | TEMPERATURE STABILITY (°C) | HEATING CAPACITY (KW) | VOLUME |
BTI- WBI-2 | +18°C to + 99.9°C | ±0.2 | 0.25 | 2 ltrs |
BTI- WBI-8 | +18°C to + 99.9°C | ±0.2 | 0.5 | 8 ltrs |
BTI- WBI-12 | +18°C to + 99.9°C | ±0.2 | 1.0 | 12 ltrs |
BTI- WBI-20 | +18°C to + 99.9°C | ±0.2 | 2.0 | 20 ltrs |
BTI- WBI-50 | +18°C to + 99.9°C | ±0.2 | 4.0 | 50 ltrs |
Model |
BTI-UC-1.8L |
BTI-UC-2.5L |
BTI-UC-4L |
BTI-UC-6L |
BTI-UC-9L |
BTI-UC-12L |
BTI-UC-12L |
BTI-UC-16L |
BTI-UC-25L |
Make |
BioGene |
||||||||
Tank Volume (liters) |
1.8 L |
2.5L |
4L |
6L |
9L |
12L |
12L |
16L |
25L |
Ultrasonic Wattage |
50 W |
50 W |
100 W |
150 W |
200 W |
200 W |
300 W |
300 W |
600 W |
Ultrasonic Frequency |
40 ± 3 KHZ |
||||||||
Tank Dimension |
150 x 137 x 100 |
150 x 137 x 150 |
235 x 135 x 150 |
300 x 153 x 150 |
300 x 240 x 150 |
300 x 240 x 200 |
330 x 300 x 150 |
330 x 300 x 200 |
500 x 300 x 200 |
Outer Dimension |
175 x 165 x 200 |
175 x 165 x 250 |
265 x 165 x 290 |
325 x 175 x 290 |
235 x 265 x 290 |
235 x 265 x 340 |
354 x 325 x 340 |
354 x 325 x 400 |
530 x 330 x 420 |
Heating |
Ambient to 80ºC Digitally Controlled (Dual display) |
||||||||
Digital Timer |
5 to 60 Minutes |
||||||||
Tank Drain |
N/A |
Ball Valve |
|||||||
Inner Tank Material |
Stainless Steel |
||||||||
Outer Housing Material |
Stainless Steel |
||||||||
Power Supply |
220 Volt, AC 50 Hz, Single Phase |
Model | Temperature Range (℃) | Temperature Stability (℃) | Display Resolution (℃) | Inner Tank size (mm3) | DepTh (mm) | Pump Flow (L/min) | Top Opening Dimen (mm) | Drain | NW (kg) |
BTI-5A | Ambient+5~95 | ±0.2 | 0.1/0.01 | 240×140×150 | 150 | 6/10 | 130×130 | Yes | 9 |
BTI-15 | Ambient+5~100 | ±0.05 | 0.1/0.01 | 300×240×200 | 200 |
6/10 |
235×160 | Yes | 12.84 |
BTI-15A | Ambient+5~200 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 300×240×200 | 200 | 6/10 | 235×160 | Yes | 12.84 |
BTI-20 | Ambient+5~100 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 500×300×150 | 150 | 6/10 | 310×280 | Yes | 15 |
BTI-20A | Ambient+ 5~100 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 500×300×150 | 150 | 6/10 | 310×280 | Yes | 15 |
BTI-20B | Ambient+5~200 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 500×300×150 | 150 | 6/10 | 310×280 | Yes | 20 |
BTI-15B | Ambient+5~200 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 300×240×200 | 200 | 6/10 | 235×160 | Yes | 15 |
BTI-25 | Ambient+5~100 | ±0.05 | 0.1/0.01 | 280×250×300 | 300 | 6/10 | 235×160 | Yes | 20 |
BTI-25A | Ambient+5~200 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 280×250×300 | 300 | 6/10 | 235×160 | Yes | 25 |
BTI-30 | Ambient+5~100 | ±0.05 | 0.1/0.01 | 400×330×230 | 230 | 6/10 | 310×280 | Yes | 21.62 |
BTI-30A | Ambient+5~200 | Water ±0.1 Oil ±0.2 |
0.1/0.01 | 400×330×230 | 230 | 6/10 | 310×280 | Yes | 25.14 |
BTI-10 | Ambient+5~100 | ±0.1 | 0.1/0.01 | 280×190×200 | 200 | 6 | 180×160 | √ | 14 |
BTI-18 Q | Ambient+5~100 | ±0.05 | 0.1/0.01 | 320×275×200 | 200 | 6 | 250×230 | √ | 14.5 |