Bionics Advanced Filtration Systems Pvt. Ltd

Tri Nagar, Delhi

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times.

 

Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber).

In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards:
• Salt fog testing as specified in DIN 50021• Condensed water test as specified in DIN 50017 and EN ISO 6988• Standard climates as specified by DIN 50015

 

With these Corrosion Test Chambers you can perform different corrosion tests including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. With the commitment of high quality product service, we are designing and developing our systems based on users' experience and current industry demand. Below mentioned are detailed specifications, please read those for complete information and for any queries contact us by email:

 

Capacity

 

Designed with four capacities 108 liters, 270 liters, 480 liters and 980 liters. However these salt spray testers and boxes can also be designed for higher capacities based on customers' requirements.

 

Chamber Construction

 

Made with anti-corrosion FRP sheets ensuring that the equipment is not attacked or rotted by the corrosive salt solution. The chamber construction is double walled insulated with high density ceramic wool.

 

Control

 

PID controllers for Chamber and Humidifier with separate timer and manual control of water level in the humidifier. As an option we also provide PLC based control system for digital measurement and control of system. Operating parameters are followed by graphic color touch panel.

 

Lid

 

The upper cover or lid is robust and made of FRP / Acrylic sheet. This lid is pneumatic operated enabling easy opening and closing while operation. Lid with FRP material a full size window enables viewing of samples without disturbing the test.

 

Spray Nozzle

 

The salt spray nozzle (glass nozzle) is imported from Germany and designed as per DIN specified.

 

Solution Storage

 

A temperature controlled non- corrosive storage tank for solution storage is provided with Immersion heater fitted in it.

 

Atomizer

 

Nnon-metallic, anti-corrosive and capable of producing a fine fog of 20 - 30 micron. (Optional - Clear and transparent Lucite atomizer for better aesthetics and sturdiness.)

 

We area leading salt spray chamber manufacturer, supplier and exporter company based in India. Not limited to standard models, we also offering tailor made services to our clients. If you have specific requirements in your corrosion test chamber, you can freely contact our technical team.

These units are fully tested and certified prior delivery to the customers' place. We also provide AMC, repair and maintenance services for salt spray chambers within India. To know more about price, warranty and supply details please send us email mentioning all your detailed queries. Our customer support executives will contact you with precise information you want

 

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards: Salt fog testing as specified in DIN 50021Condensed water test as specified in DIN 50017 and EN ISO 6988Standard climates as specified by DIN 50015

Whether you are new to corrosion atmosphere testing or have been conducting testing for years, we present Salt spray chambers or Salt Fog Chambers that are not only easy to use and maintain but also provide the accuracy and flexibility necessary to meet today's demanding corrosion test procedures including Salt Spray Test, Condensation Water Test and Cyclic Corrosion Test. These machines create three types of manually adjusted environment; salt spray, high humidity and air drying at any given temperature within the chamber. Any combination of these environments can be programmed, in any order, to form a corrosion cycle. Such a corrosion cycle can be automatically repeated a predetermined number of times. Our models meet the requirements of basic, continuous salt spray tests conducted at a single temperature only, such as ASTM B117 and similar international test standards, and may be used with pH neutral salt solutions (NSS) or those acidified by the addition of Acetic Acid (ASS), Seawater Acidified Test (SWAAT) or Cupric Acid (CASS). Models above 480 Liters of capacity are ideal for Cyclic Corrosion Cabinet (Cyclic Corrosion Chamber). In Laboratories corrosion tests are used extensively for selection of materials and their surface protection. Our Corrosion box chambers are what you need to predict corrosion resistance of materials such as paints and coatings and are designed and developed to meet the widest possible range of industry standards: Salt fog testing as specified in DIN 50021Condensed water test as specified in DIN 50017 and EN ISO 6988Standard climates as specified by DIN 50015

We design, build and install stability test chambers for pharmaceutical use (Drug and Medicine Tests). These Photostability chambers are specifically designed to perform near UV and visual light testing with fluorescent lamps per ICH Q1B Guidelines, Option 2. Designed matching with international standards ICH, WHO Guideline, and USFDA Standards our stability chambers have appreciated by industry experts worldwide and recommended for laboratories, universities and pharmaceutical research labs. These chambers provide uniform temperature control, low maintenance and allow quick response for forced degradation testing and confirmatory studies.

Our stability test chambers are easy to install, use and calibrate. Lamp replacement is safe, quick and easy to perform. The whole unit is mounted on casters helping in mobility of the equipment anywhere in laboratory. We have supplied these stability test chambers to major laboratories from India, Asia, Africa and Middle East countries at factory price. We also produce GMP compliant photo stability chambers that are supplied with IQ, OQ, PQ, & DQ documentation complete with reports, calibration and test certificate.

Capacity:

Standard models are available with capacity 100 Liters, 170 Liters, 255 Liters, 450 Liters and 1000 Liters.

Temperature Humidity Range:

Temperature range from 10C to 50C with accuracy of 0.1C - 1C. The humidity range is 20% to 90% RH with accuracy of 2%RH - 3%RH.

Illumination:

Equipped with ICH-compliant illumination ideal for photostability testing and provides clear and meaningful test results, according to ICH guideline Q1B, Option 2).A cool white florescent light for 1.2 million LUX hour's exposureUV-A lights for 200 watt hours/square meter exposureBoth the lights have independent control to avoid over exposure

Control System:

Imported Microprocessor based PID controller with direct display of SET and Process value of temperature and humidity. The control panel consists of circuit breaker, dry / wet heater and compressor with indication lamps. Non-volatile memory to allow chamber to return to original set point when power is restored in the event of power failure.

Construction:

Come with double walled construction, with a choice of customers the external chamber can be made of Mild Steel, 304, 316 or 316L grades stainless steel with painted or power coated finish. The internal chamber is made of 304 grades stainless steel with mirror finish. The gap between two chambers is filled with thick CFC free PUF insulation which minimizes heat loss and helps in low energy consumption. The whole unit is mounted on caster wheels for easy mobility.

Doors:

With inner glass door user can easily view samples inside without any botheration. Outer door is solid and made of M.S, 304 or 316 grades stainless steel. Door is fitted with magnetic gasket and locking system.

Heating and Cooling:

For highly efficient heating these equipment use U shaped stainless steel jacketed heating element. An automatic temperature limit keeps the system safe from over-heating due to workload. For cooling high capacity industrial cooling system is used which keeps set temperature and RH values unaffected. Superior cooling performance is achieved through hermitically sealed compressor which is CE marked and of reputed brand. Uniform air distribution system helps in maintaining steadiness in environment.

Humidity Generation:

Heater based humidity generator with float valve controlled water reservoir. Steam is conducted into the inner chamber by means of conduits from the Humidity Generator. An additional device, water failure protection is fitted for flawless performance. This device disconnects heater supply in case of water supply failure and starts automatically when the water supply resumes.

Pre-Installation Requirements:

Pharmaceutical Test Chambers or Photostability Chambers require essential checks before installation.Below 30C room temperatureAdequate power supply with stabilizer, MCD and EarthingContinuous DM or Distilled Water SupplyAir conditioned or cross ventilated environment

Validation:

Each stability chamber is validated before delivery to the customer. We offer complete validation with document evidence showing that the installed equipment meets the specifications of manufacturer, user and the applicable regulations. We also provide services to validate stability test chambers for our customers so they have complete documentation citing that their equipment will function properly according to IQ, OQ and PQ protocols. We also offer on-site validation services to satisfy FDA guidelines for qualification verification of equipment.

Our Dust Chambers are specially designed for reproducing a dust filled environment in a limited workspace following Indian and International testing standards especially for research and development works related to automotive and electronic components testing of their resistance to dust atmosphere. In a controlled atmosphere, these sand and dust chamber machines create simulation of dust in accordance to following standards:

Our Dust Chambers are specially designed for reproducing a dust filled environment in a limited workspace following Indian and International testing standards especially for research and development works related to automotive and electronic components testing of their resistance to dust atmosphere. In a controlled atmosphere, these sand and dust chamber machines create simulation of dust in accordance to following standards:

Our Dust Chambers are specially designed for reproducing a dust filled environment in a limited workspace following Indian and International testing standards especially for research and development works related to automotive and electronic components testing of their resistance to dust atmosphere. In a controlled atmosphere, these sand and dust chamber machines create simulation of dust in accordance to following standards:

 

Testing StandardsEmploying with finest of engineering practices our Sand and Dust Chamber are uniquely designed to perform testing processes compliant to IEC, JIS, MIL and IS standards etc. Further more, many other suggestive standards can also be combined on request.

CapacityThese units are custom designed and constructed with exact specifications provided by the customers. However, along with tailor made solutions, we also have our standard models which are instant available with different ranges of parameters and capacities as per specific testing requirements.

ConstructionOur Dustproof testing machines are constructed with high quality materials. With a custom choice of customers, exterior is constructed with CRCA sheet, Stainless Steel (304, 316 & 316 L) or Galvanized sheet. Interior chamber is made of stainless steel with mirror finish. The door is solid and lockable with a micro switch enabling an interlocking system. The door is provided with toughened glass observation window and a rubber wiper with rotating handle.

Dust Tray (Shelf) Stainless steel dust trays provide strong platform to place components and let free flow of dust. These trays are removable and can be adjusted as required.

Safety FeaturesWith safety features including over load, Emergency stop, door open and short circuit, these units provide safe working environment to both the samples and operators.

Optional Accessories:Supplied with a number of optional accessories including Casters, Chamber Lamp and Viewing window Wiper etc.

 

We are a leading Sand and Dust Test Chamber manufacturer, supplier and exporter company based in India. We are supplying these units to all over India, Asia, Africa and Middle East Countries at economical price and excellent warranty. We are also offering custom designing and developing of Dust Chambers with the exact specifications provided by the customers. All these machines are tested on various parameters before deliver to the client's work place. We also undertake repair, service and AMC for Dust Chambers.

Humidity and Temperature test chambers by Bionics Scientific are designed to provide such environment where highly accurate control of relative humidity and temperature is required. These heat only climatic chambers are new generation systems that provide superior level of performance over a wide range of application areas including testing products relating to aerospace, electronics, pharmaceutical, automobile and environmental stress screening etc. We manufacture humidity and test chamber in various sizes and temperature ranges; in addition, a number of optional accessories are fitted to enhance user experience. These systems are capable of delivering precise humidity and temperature control, while offering low maintenance requirements and built-in safety features for your operator. Depending upon requirements, we can design humidity chambers as cabinet type or large sized walk-in room type with complete on-site and off-site validation packages. All these units are supplied throughout India and overseas at factory price.

Humidity and Temperature test chambers by Bionics Scientific are designed to provide such environment where highly accurate control of relative humidity and temperature is required. These heat only climatic chambers are new generation systems that provide superior level of performance over a wide range of application areas including testing products relating to aerospace, electronics, pharmaceutical, automobile and environmental stress screening etc.

We manufacture humidity and test chamber in various sizes and temperature ranges; in addition, a number of optional accessories are fitted to enhance user experience. These systems are capable of delivering precise humidity and temperature control, while offering low maintenance requirements and built-in safety features for your operator. Depending upon requirements, we can design humidity chambers as cabinet type or large sized walk-in room type with complete on-site and off-site validation packages. All these units are supplied throughout India and overseas at factory price.

These equipment are designed for variety of applications and further constructed in benchtop and reach-in models with up to 3500 liters of capacity. From to basic to advanced temperature / humidity requirements, these environment chambers by Bionics Scientific are tailor made to exact needs.

Temperature / Humidity:

Designed with 3 different temperature ranges which can be further customized as required. These temperature ranges are ambient to 70C. Humidity ranges from 20% to 98% RH with stability of + / - 3%. Temperature of heating and cooling functions is monitored and controlled by LCD / LED digital display with stability of + / - 5C. All our humidity chambers are fitted with over temperature safety cut out.

Controls:

Equipped with microprocessor PID control featuring high contrast LCD display and CPU logic control system. These units provide optimum control of temperature, humidity and other parameters are controlled by microprocessor PID controllers. A high contrast LCD display displays measurement of temperature, humidity, set-point, present value etc.

Construction:

Interior and exterior chambers are made of painted and corrosion resistant 304 grades stainless steel. Shelves are made of heavy-duty stainless steel wire, easy to clean and adjustable. All humidity chamber models are trolley mounted with heavy duty caster wheels for easy mobility of equipment. Indoor glass door is optional which allows visibility of samples to be tested. Outer door is glass wool insulated and equipped with solid handle, locking system, silicone packing and optional viewing widow. Efficient lighting system enables users to view inside the chamber without glare.

Heating System:

The SUS tube heater is used with drying and humidity bulbs.

Humidity System:

A low pressure moisture generator tank is used to generate the moisture and add humidity in the chamber. A high capacity immersion heater having 1 V4 BSP threading has been provided inside the moisture tank. This moisture tank is provided along with low water level controller with mechanical float type refilling arrangement.

Air-Circulation system:

For effective air circulation inside the unit a 1/8HP capacity ac motor with impeller is provided. This air-circulation system is responsible for constant temperature and humidity condition inside the system chamber.

Computer Interface:

Computer interface is an optional feature, a software and RS-232C port are provided as standard. This feature allows storage of program information, backup of value settings / recovery, and temperature / humidity values. RS-485 communication port offers connection of a maximum of 9 temperature & humidity chamber units to one PC.

Safety Features:Power supply circuit breakerOver current protectorOverheat& overcool temperature protectorsUnit shuts down after alarm for over heatingDoor opening alarm

Bionics Scientific is a leading humidity temperature test chamber manufacturer in India. Our engineers carefully customize humidity temperature test chambers and walk-in rooms that meet industry specific research based applications. Each unit is tested on various parameters in our factory before delivery ensuring worry free performance at customers' site. For price, quotation and other important details, please email your query or just talk to one of our customer support executive, they will assist you with precise information you need.