Post Buy Requirement
BT

BioEnable Technologies Pvt Ltd

Add Review

Our Products

  1. Card Reader

    2 Products available
  2. Smart Cards

    1 Products available
  3. Memory Card

    1 Products available
  4. Telecommunication Equipment & System

    1 Products available
  5. Access Control Reader

    1 Products available
  6. Others Products 1 Products available

Our Products

Leading Manufacturer, Supplier & Retailer of tag reader.

Contactless Smart Card

ACR1281S-C1 DualBoost II is a dual interface reader that can access any contact and contactless smart readers following the ISO 7816 and ISO 14443 standards. ACR1281S-C1 DualBoost II enables one to integrate conventionally separate and independent applications for contact and contactless technologies into one device and one card. It can be used for banking or e-commerce to settle payments or other transactions securely using credit cards, and it for verifying contactless cards to provide access to specific areas or workstations. It provides the perfect complement to the all-in-one card concept that combines many kinds of smart card applications in just a single card. The ACR1281S-C1 is a plug and play device that does not require any driver installation. It comes with a built-in SAM slot for added security in both contact and contactless applications. Lastly, the ACR1281S-C1 makes use of high-speed communication for contactless cards at a maximum of 848 kbps, which makes it suitable for highly demanding applications.
View Complete Details

Proximity High Performance EM RFID Clamshell Cards

  • Compatibility: EM4102
  • Coding: Factory preprogrammed
  • Options: Field programmable
  • Passive: No batteries reguired
  • Slot punch: Matches most vertical ID badge

  • Typical maximum read range:GP90A up to 110 cm
  • Dimensions: ( 8.6 X 5.40 X 0.19 cm )
  • Operating temperature: -45to 70C
  • Storage temperature: -50to 160F (-45to 70C)
  • Part number Part NO.: CFR07
  • Description: 125kHz, ASK, Manchester coding
  • Rate timing: MOD64 (64 clocks per bit)
  • Chip type: EM4102 (or compatible)

  • Parking Management
  • Warehouse Management
  • Any long range RFID application

View Complete Details

Tag Reader

PROXIMITY 125KHz readers are high performance proximity readers featuring long range and small dimensions. The readers run from any voltage from 5 to 12.5 VDC and feature high read range at as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control. The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, Clock/ Data and RS-232 serial ASCII output, making it easy to upgrade existing installations.

Features
  • Low cost
  • Long read range
  • Small outline
  • Wide voltage range
  • Potted for environmental protection
  • Externally programmable interface
  • Weather resistant
Specifications
  • Power Requirements : 5 12.5 V DC regulated, linear
  • Interfaces : Wiegand, MSR ABA Track2 or RS232
  • Read Range : Up to 13 cm at 5V with ISO card; up to 20 cm at 12.5V
  • Frequency : 125KHz, ASK
  • Format : 64 bits, Manchester coding
  • Transponder : Read only
  • Dimensions : 78 x 43 x 15 mm
  • Temperature Range : Readers: -25 65C
View Complete Details

Long Range Rfid Reader

GP90A is an extended range proximity reader featuring read range of up to 90 cm with Standardclampshellcards and extended range ofupto1.3meters with Special Tags available fromchipsilicon. The unit comes with specially designed external power supply and other form factors make it particularly suited to access control, car parking and through-wall reading applications.

Features
  • High-precision auto tuning circuitry compensates for nearby metallic objects
  • Bright LED indicators, tuning LED bar
  • Firmwareupgradeablein the field
  • Attractive and waterproof housing design
Specifications
  • Interface RS232
  • Reading Range Up to 90 cm with ISO card in ideal conditions or up to 130 cm with special Tag
  • RFID cards accepted 125KHz, 64 bits, Manchester encoding
  • Maximum power switched by internal relay Up to 24V / 2A
  • Operating temperature range -10 +60 C
  • Audio / Visual indication Bright blue LED and Buzzer
  • Dimensions 420 (W) x 320 (L) x 45(D) mm
Applications
  • Access Control System
  • Car Parking System
  • Through-wall Reading Application
  • Personal Identification
  • Hands Free Application
View Complete Details

Memory Cards

ACS offers a variety of memory cards that may be used with a range of smart card readers/writers. These are the SLE5542 and the SLE5528 memory cards.

Features

SLE5542 Memory Card Features:

  • SLE5542 is 100% functional compatible to SLE 4442
  • Intelligent 256-Bytes EEPROM
  • Write-protect function
  • Programmable Security Code (PSC)
  • EEPROM is organized 256 x 8 bit offering the possibility of programmable write protection for each byte
  • Data Memory alterable only after verification of 3-Byte Programmable Security Code (PSC)

SLE5528 Memory CardFeatures:

  • SLE5528 is 100% functional compatible to SLE 4428
  • 1K byte EEPROM
  • Write-protect function
  • Programmable Security Code verification logic
  • All the memory, except for the PSC, can always be read
  • The memory can be written or erased only after PSC verification
  • After eight successive incorrect entries the error counter will block any subsequent attempt at PSC verification and hence any possibility to write and erase
View Complete Details

DualBoost Contactless Smart Card Reader

TheACR128is a dual interface smart card reader compliant to ISO 7816 Part 1-3 Class A, B standard for the Contact smart card and to ISO 14443 Part 1-4 Type A, B standard for the Contactless Card.

By combining contact and contactless interfaces in one reader, ACR128is appropriate for situations where the environments favour dual interface applications. For example, you may use the ACR128 on the one hand to settle your online payment with contact EMV Level 1 cards, on the other hand to read the balance of your Mifare membership cards.

Furthermore, it can also be used as embedded readers in bigger machines and systems such as vending machines, automatic fare collection systems, and public telephone systems.

ACR128is PC/SC Compliant for contact and contactless interfaces. It makes use of high-speed communication for PICCs (proximity or contactless cards) with maximum speed of 848 kbps like DesFire Cards. Furthermore, ACR128 has intelligent support for hybrid cards andcombIcards and it is designed such that it can still detect a contactless card even if it is inserted in the contact card slot.

As different applications require different levels of security and functionality, theACR128has a built-in SAM card slot for added security. What is more isACR128uses a landing type card acceptor which minimizes card damage for more reliable card operations.

With the variety of features that theACR128offers, you will certainly benefit from all these product features to start developing a wide range of applications!

Features
  • USB Full Speed 12 MBPS Interface.
  • CCID Compliance.
  • Contactless Smart Card Reader:
    • Read/write speed of up to 848 kbps
    • Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type)
    • Supports ISO 14443 Part 4 Type A and B cards and Mifare series
    • Built-in anti-collision feature (only one tag is accessed at any time)
  • Contact Smart Card Reader:
    • Supports ISO 7816 Class A, B and C (5 V, 3V and 1.8 V)
    • Supports microprocessor cards with T=0 or T=1 protocol
    • Supports memory cards
    • ISO 7816 compliant SAM slot
  • Application Programming Interface:
    • Supports PC/SC
    • Supports CT-API (through wrapper on top of PC/SC)
  • Built-in Peripherals:
    • Two user-controllable LEDs
    • User-controllable buzzer
  • Durable landing type smart card connector.
Application
  • e-Government
  • e-Banking and e-Payment
  • e-Healthcare
  • Transportation
  • Network Security
  • Access Control
  • Loyalty Program

Technical Specification
Dimensions 120.5 mm (L) x 72.0 mm (W) x 20.4 mm (H)
Weight 150 g
Interface USB Full Speed
Operating Distance Up to 50 mm (depends on the tag type)
Supply Voltage Regulated 5V DC
Supply Current 200mA (operating); 50mA (standby)
Operating Temperature 0-50â° C
Operating Frequency 13.56 MHz
Smart Card Interface Support
  • Contact
    • ISO 7816 Class A, B and C (5V, 3V, 1.8V)
  • Contactless
    • ISO 14443 Type A & B
    • Mifare
Compliance/Certifications
  • ISO 14443, ISO 7816, CE, FCC, PC/SC, CCID, CE, FCC, RoHS, USB Full Speed
  • Microsoft  WHQL: 2000, XP, Vista, 7, 8, Server 2012
Operating System Support
  • Win 2000, Win 2003, Win 2003 R2, Win XP, Win Vista, Win 2008, Win 7, Win 8
  • Win 2003 x64, Win 2003 R2 x64, Win XP x64, Win Vista x64, Win 2008 x64, Win 2008 R2 x64, Win 7 x64, Win 8 x 64, Win 2012 x64
  • Mac
  • Linux
  • Android 3.1 and above


 


View Complete Details

Smart Card Reader

Introduction

ACR88 is a versatile handheld portable smart card reader, having a built-in keypad, LCD, bi-color LED and buzzer features. It can also host the feature of non-volatile memory to give better support to your system. In addition, its onboard memory enables future firmware and application enhancements that guarantee against obsolescence.

ACR88 is a line of secured electronic devices of pocket size designed primarily for multi-application. It is capable of performing secure authentication, displaying rich information from the card, conducting online or offline transaction.

Also ACR88 is programmable through ACR88 ScriptBuilder. Users can now quickly build their own standalone applications according to easy-to-use and well defined script commands provided by ACS. There is no more need to program the device in lower level languages, nor to deal with development and other hardware platform dependent issues! With ACR88, you can have full rein of realizing the limitless possibilities, which your application will bring.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us