Our Products
bio-x is the authorised channel partner forblood and fluid warmerfrom kewell medical technology.blood and fluid warmeris based on infra red technology. It warms blood and iv fluids in only 30 seconds to the desired temperature.
blood and fluid warmercan be used in all cases, by which hypothermia of the patient can be prevented through cold transfusions and infusion solutions. The intelligent control circuit of the device operates and deals with the temperature signal that is sent by high precision sensor and continually adjusts heating state, in order to rapidly keep the surface temperature of the heat exchanger at the set temperature.
at the same time, the heat is transferred into the flowing liquid in the tubing that is placed in the grooves of the heat exchanger, to increase the temperature of the liquid.
there are dual independent temperature protections inside the device to ensure the security of use. Blood and fluid warmer helps in keeping blood and fluids warm, between 37 - 42c, delivering warm fluids to the patient at flow rates up to 5000 ml/hr by outperforming hotplate technologies in 91% of surgical procedures.
blood and fluid warmeris very easy to use, enabling the maximum safety to the patients. The device takes less time to install or setup giving outstanding performance for daily blood and fluid warming. Its cost effective feature gives an outstanding performance for daily use.
the warmer is easy to disconnect from a patient. The device has lower maintenance and operational cost. Ft 1800 & ft 800 comes with an external warming profile for better accuracy.
ft 1800 & ft 800 comes with an external warming profile for better accuracy.
Model | FT1800 | FT800 | QW3 |
Temperature Setting | 33-41°C | 39°C | 37°C ~ 42°C ( 0.1°C increments) |
Power Supply | AC 230 V / 50-60 Hz | AC 230 V / 50-60 Hz | AC 230 V / 50-60 Hz |
Power Consumption | Max. 120VA | Max. 120VA | Max. 80VA |
Type Of Protection Against Electric Shock | Class I | Class I | Class I |
Degree Of Protection Against Electric Shock | BF Applied Part, Defibrillation-Protected | BF Applied Part, Defibrillation-Protected | BF Applied Part, Defibrillation-Protected |
Defibrillation- | Protected | Protected | Protected |
Degree Of Protection Against Ingree Of Liquids | IPX2 | IPX2 | IPX1 |
Temperature Accuracy | ±1.0°C | ±1.0°C | ± 1°C |
Overheat Protection | 42°C/43°C | 42°C/43°C | 43 /45 /48±3 |
Low Temperature Alram | 32°C | 33°C | 36°C |
Warming Up Time | From 20°C to 36°C Approx 2min. | From 20°C to 36°C Approx 2min | From 20°C to 36°C Approx 2min |
Operating Mode | Continuous | Continuous | Continuous |
Dimensions | 85*65*175mm | 85*65*175mm | 85*65*175mm |
Weight | 1.20Kg | 1.20Kg | 0.7kg |
Warming Profile | Length 1400mm; Compatible to IV Tube 3.5-5.0mm O.D | Length 1400mm; Compatible to IV Tube 3.5-5.0mm O.D. | NA |
bio-x specializes in the manufacture of led peripheral ceiling light panels.
keeping the needs of our customer in mind along with the continously changing demands of hospitals, hotels, commercial and residential projects we have developed an effective led ceiling light.
features:
bio-x luminaries are designed to avoid reflections (anti-glare).
bio-x luminaries are designed specially to facilitate the seamless design of the modular operation thetre in hospitals.
led life- 100, 000 hours
colour rendering - >90%
efficiency >85%
colour temperature - 6500k
maximum surface luminance >13000 lux
dimensions :
300mm x 600mm
600mm x 600mm
.Patient Identification Bands is an important way to reduce patient safety risks. Patient misidentification continues to result in medication errors, transfusion errors, testing errors, wrong person procedures, and the discharge of infants to the wrong families. Today, with as many as one million people harmed by errors during treatment at hospitals each year, identification of patient using Wristbands helps minimize medical errors and administrative issues can be handled efficiently.
Bio-X offers optimal and secure patient identification solutions for healthcare facilities.
Colour coding of wristbands facilitates rapid visual recognition of specific issues and can be modified as per the requirement of the organization.
We offer Patient Identification solutions for admissions, blood, mother and baby, pediatrics, disaster response, outpatient and emergency room purposes.
we would like to introduce ourselves as suppliers of patient transfer system- easy move.
this concept of patient transfer is new to india, but it is very popular in the usa, uk and europe for the last 3 decades where lifting patients for transferring patients is not recommended because it causes the nurses and attendants to suffer back pain /back pain injuries.
this has been the protocol followed in all the emergency departments around the world including operation theatres, wards, icu's etc basically where ever patient transfer is done between the ot table to stretcher or stretcher to hospital bed.
furthermore it is recommended to use easy move because the patient transfer takes place without lifting the patients body especially in the case of accident cases.patient services
The magnetic writing board for the clean rooms is used for writing down information by doctors / technicians. The information might be the list of instruments / implants or how the operation needs to be performed.
The magnetic writing board is flushed into the Clean room wall. Which makes the Clean room seamless and does not permit dust or any particles to enter the clean room from the joints.
The board is also coated with an antimicrobial coating making it useful for all clean rooms.
Because of the magnetic property the magnetic duster and the magnetic marker can be stick directly on the writing board and you do not need to keep the marker and the duster hence making it extremely useful for all clean room applications.
SIZE : 845 X 550 X 29 mm
CUTOUT SIZE : 825 X 530 mm
We manufacture Single, Double and Triple scrub sink station Manual, IR operated, Knee Operated and foot switch operated scrub sink made from high quality stainless steel ss 304 having electronic or manual taps with thermostatic controller which can be floor or wall mounted
Bio-X supplies SS 304 grade Pressure relief dampers with SS blade to maintain +ve pressure inside the OT. Gear operated manual dampers to be operated from laminar flow to plenum all complete as per Specifications.
We would like to introduce ourselves as the manufacturers and supplier of Fogger machine. Please find attached the brochure for your reference.
We also manufacture accessories like oscillating systems (turntable) to oscillate the fogger as per clients choice. Broadly the models are as below:
Bio-X foggers are used predominately for the application of disinfection at hospitals, laboratories, pharmaceutical industries, clean rooms, healthcare, biotech & tissue culture labs, dairies, food processing areas & hatcheries etc. It is also used for the application of biocides, fungicides, pesticides.
Bio-X foggers generate a fog or mist formed by Ultra low Volume (ULV) uniform sub-micron size liquid particles (Dry Fog). Liquid formulations can be applied in concentrations of 2-90% & at flow rates of 1-3 liters per hour (adjustable) using upgrade Flow Control Mechanism. A Digital Timer to set the fogger on for 1-99 minutes makes the entire fogging operation hassle free. Bio-X foggers run on a high speed FHP motor that provides maximum thrust of spray; coupled with the advance thrust design of Air Jet Nozzle, the foggers achieves fog thrust of > 50 feet. Entire body & internal parts are made of materials that resist corrosion & chemical attack. The storage tank ranges from 6.5Ltrs to 8Ltrs to cover an area of >20, 000 cubic feet.
FEATURES:
SPECIFICATIONS | BX 8P | BX6.5S |
Timer Devices | Digital Timer (1-99 Min) | |
Working Hours Counter | Available (Digital) | |
Particle Size | Uniform Sub Microns | |
Liquid Flow Rate | 1-3 Ltrs./Hr. (Adjustable) | |
Flow Control Mechanism | Available SS 316 | |
>Nozzle System | SS 316 Grade, Air-Jet Nozzle (Advance Thrust Design) | |
Tank Capacity | 8 Ltrs. | 6.5 Ltrs. |
Tank MOC | HDPE | SS 316 L |
Noise Level | Less than 88 DB @ 1 Meter | |
Air Filter | Triple Stage With Clamp | |
Motor Speed | More than 24,000 RPM (Approx) | |
Power Supply | 230 VAC, 50/60 Hz | |
Material Of Construction (MOC) | Hardware:- SS 304, Strainer, Nipples:- SS 316, Tubing’s:- Silicon Grade (FDA & UPS CLASS VI Complient) |
|
Dry Weight | 7-8 Kgs. |
bio-xintroducesvales & hillsecg mornitoring icardioview device in india.
icardioview:innovative, intutive and simple and a unique gadget meets for all your professional demands in cardiac world. Profession meets fashion- its more than an ecg machine.
features:simultaneous 12-lead ecg
We are channel partnerOur strengths of AIRINSPACE (France) for marketing their Air Decontamination System in India.
With over 14 years of research& developmentin France, the PlasmairRange of Air Decontamination System are now available in India. The Plasmair process not only collects all particles at better than HEPA performances but retains and kills airbone biological material such as spores, viruses and bacteria infact any aerosolised or airbone infection risk is neutralised at better than 99.99% in seconds, including MTB.
s originated with the protection of immunosuppressed patients, a critical care environment (Hematology / Oncology) where air quality is paramount, this same technology as allowed Airinspace to offer CDC and WHO complaint Isolation rooms in minutes with no engineering. The equipment can also be used to create positive and negative pressure CCUs, without the need for ducts and Airinspace can now offer high risk isolation with the modular construction and anti-room concept.
Airinspace range of Plasmair air Decontamination machines find their primary importance in Tuberculosis wards, Burn wards, Liver transplant units, Bone Marrow Transplant (BMT) units, Neonatal wards and places where air bornedisease are critical.
We are channel partners of AIRINSPACE (France) for marketing their Air Decontamination System in India.
With over 14 years of research& developmentin France, the PlasmairRange of Air Decontamination System are now available in India. The Plasmair process not only collects all particles at better than HEPA performances but retains and kills airbone biological material such as spores, viruses and bacteria infact any aerosolised or airbone infection risk is neutralised at better than 99.99% in seconds, including MTB
Our strengths originated with the protection of immunosuppressed patients, a critical care environment (Hematology / Oncology) where air quality is paramount, this same technology as allowed Airinspace to offer CDC and WHO complaint Isolation rooms in minutes with no engineering. The equipment can also be used to create positive and negative pressure CCUs, without the need for ducts and Airinspace can now offer high risk isolation with the modular construction and anti-room concept.
Airinspace range of Plasmair air Decontamination machines find their primary importance in Tuberculosis wards, Burn wards, Liver transplant units, Bone Marrow Transplant (BMT) units, Neonatal wards and places where air bornedisease are critical.
The angiography guide is primarily used to guide angiography catheters to the lesion in the artery in angiography procedures. Available in straight & J-formed tips. Diameter varies from 0.018'' to 0.038'' and length ranges from 150cm to 260cm. The surface of the guide wire is PTFE-coated and has extra stiff shaft stiffness.
Guiding catheter has a large non-tapered lumen that allows contrast medium injection and pressure monitoring and facilitates the intravascular passage of interventional devices.
Available in different sizes
The angiographic catheter is a plastic tube which functions as a conduit for contrast, fluids, and pressure measurement during cardiac catheterization of coronary arteries and the left ventricle
Blood Collection System is composed of evacuated tubes, single use blood collection needle, holder along with Bio-X patented product Clear Spot Bandage is used for collection of blood in Labs & Hospitals.
Features:
surgeon control panelwe are surgeon control panel manufacturer in mumbai. We manufacture and supply a wide range of surgeon control panel. We are manufacturing the membrane type, touch glass, touch screen type and monochromatic graphic touch screen panels.
Bio-X offers the entire range of Vacuum Blood Collection Tubes.
Bio-X Blood Collection System is composed of evacuated tubes, single use blood collection needle, holder along with Bio-X patented product Clear Spot Bandage is used for collection of blood in Labs & Hospitals.