Bijendra Heavy Electricals

Delhi Road, Meerut, Uttar Pradesh

Using Components form brands     Larsen & Terbo Ltd.     Havells India Ltd.     HPL India Ltd.     C&S Electric     ABB Ltd.     Indo tech Electric Ltd.     Epcos India Ltd.     Siemens Ltd.    

Specifications of Alternators Manufactured by us: Two Poles suitable for Steam turbines with high RPM Fifty Two Poles suitable for Hydro, Marine applications of low RPM. 50Hz. To 400Hz. 415 Volts to 11000 Volts 115 RPM to 3000 RPM Over Speed, Over Temperature, Ground Fault Protection Provided. Extended shaft provided if required for hydro projects (Tailor made to Customer Specifications) 98% Efficiency Maximum Voltage fluctuation is 0.35% on sudden load. 10%± voltage adjustable on the overall rating depending on requirement of customers. The Excitation system and AVR does not damage or trip on under frequency running. Rotors are well balanced and machined on CNC. Capable to run effectively at three times of full load up to ½ a minute.

A.C. slip ring synchronous up to 5000 KVA, 11000 Volts, 3000 RPM

HFO Power Plants- We couple   our manufactured BHE make Generators  with  slow speed (500RPM)  E ngines  of MAN, Pielstick, Sulzer, Fuji or others as per their availability,  used, refurbished & overhauled by us to as good as new  by replacement of Liners, Pistons & other parts as required, with an assurance of standard size of Crank shaft & full oil pressure &  provide warranty for one year  on the Power plant supplied by us.  Our delivery period is Four to six months. Gas based Generating sets:  HFO Engines modified by us for Gas (Natural or Syn-Gas) mode of operation have- Electrical ignition system with microprocessor controlled actuator type Governors & has Options of   (a)  100% HFO   (b)  In case of shortage of HFO, automatic conversion to Dual Fuel mode without tripping of the Electricity.   (c)  In case of HFO being Shut down, automatic conversion to Natural Gas mode without tripping of the system or points a, b, c, can be vice versa also. In used HFO / Natural Gas sets available in the market, the buyer is not sure about the condition of the internal moving parts & is not provided any warranty also & in this high tech age, even the operating hours are tempered in the hours meter, We ensure this for our customers, so that the best Quality Engine/ Generator is procured. Completely New  HFO / Nat.Gas Power Plant with Slow speed (500RPM to 600RPM)   MAN Diesels, Sulzer  or other make HFO Generating Sets can also be provided by us. Their Offer prices are nearly three times the price of Power Plants  provided by us.  The delivery period  is Fifteen months. We prefer slow speed engines because they have negligible maintenance & very low sound. High speed engines are much cheap but have loud sound & high maintenance costs. We are vendors to BHEL India for Alternators. So far we have supplied close to 60 Power Plants across India. The highest capacity single unit had been 12.5 Mega Watts. We have the expertise to manufacture Alternators & Captive Power Plants of any higher capacity.

1. Less damage to your kiln, mill, ehgine etc as the gas is nearly 96% to 98% clean through wesp.   2. Increase life of your Pipeline & Kiln, Mill, Engine.   3. Higher availability of Gas for continuous production.   4. Clean working area.   5. Pipeline cleaning is not at all required. 6. Burner cleaning is not required. 7. We can achieve higher accuracy in Automation. 8. Gas can be transported at any distance. 9.Can be operated over a wide range of inlet condition, i.e. temperature, pressure, dust burden, humidity, etc. 10. Less Power Cost and Less pressure drop than any other conventional cleaning methods available.     11. Protected against Spark and Blasts.   12. Higher Efficiency can be achieved only by WESP than any other conventional fuel gas cleaning methods.   13. Can be implemented in parallel connections for every large quatities of GAS critical applications.   14. Due to low velocity of dust particles for longer stay time requirement in the shell, nery low abrasive degradation of all the working components results into months & year of trouble free continue services.   15. Money retrieved from the collected & recovered useful particles such as Coal Tar , Oils etc. greatly reduces the Payback time of the WESP.

  GASIFICATION SYSTEM- Multi-Fuel, non-conventional, Co-Generation, Renewable Green energy source, receiving backing from the Governments of various countries all over the World.  Municipal Solid Waste (viz.- Paper waste, Plastic, Polythene, Rubber, Tires, Leather, Thermocol), Biomass (viz.- Wood chips, Saw dust, Rice Husk, Corn Cobs, Sugar Cane Bagasse, Coconut Shells), Coal. Max.Output of a single Unit with single Generating set - 04 Mega Watts. For higher requirements multiple Units can be commissioned larger unit can be made but Gasifier above 4 MW are larger in size for transportation.        GASIFICATION Output of a Single Unit- Up to 4 Mega Watts, the largest, single transportable unit in the World, innovated & developed by us. For higher requirements multiple Units can be commissioned.                                                                  Gasification is a thermo-chemical process of cracking that converts solid waste, Biomass or coal to a gaseous fuel called “Producer Gas”. This producer gas is fuel for many different applications of shaft power or electricity in the equipment like, Internal Combustion Engines.  For thermal power in-  furnaces, kilns, dryers, Rolling mills and Heat treatment equipment. The equipment to be utilized is the new generation Fluidised Circulating Bed Updraft with direct & indirect oxidation Technology Gasification System developed by consistent R&D at Bijendra to obtain clean, rich and consistent supply of Producer Gas which has calorific values close to1400K.Cal/NM3, with higher gasification efficiency and low fuel consumption.  At high gasification temp. of 11oo◦ C, Carbon combines with Steam & CO2 to form CO, CH4, H2 & increases the Calorific Value of Gas & also the overall efficiency of gasification. Steam is co-generated in the Steam Jacket & injected with the air into the Reactor,    which dissociates at high temp. & forms more of CO & H2, resulting in further increase of the calorific value of the Gas. It is then subjected to washing & cooling by multiple shower washers & passed through the specially designed Tar, Sulphur & Dust separators & demoisturizer to be ultra clean for injecting directly into the I.C. Engines modified by us for Syn-Gas /Producer Gas mode of operation. We have Modified HFO based Engine to largest Producer Gas/Syn-Gas based Engine of 4 MW in the World. For higher capacities, multiple units in parallel would be used.   There are No Effluents & no environmental Gas emissions in the process apart from the Emission of Flue Gases & that also well under the Pollution control norms from the Exhaust pipe of the Generating set. The exhaust emissions of the Engine, can be used for a Waste Heat Recovery Boiler & close to 1000 Kg Steam at 7 Bar. pressure per MW per hr. can be obtained & also it can be put to use for other thermal applications.