Write a Review
Our Products
Sheet Metal Machinery
2 Products availableWe offer a complete product range of Jenny or Hurrying Machine, Machines Accessories, Automobile Machinery and Garage Machinery
| MODEL | MAC 2VE | MAC 3VE | MAC 4VE | MAC 5VE |
| TABLE | ||||
| Working Surface | 1300x300 | 1400x330 | 1600x350 | 1800 x 400 |
| No. & Width of T Nut | 3.16 | 3.22 T NUT | 3.22 T NUT | 3.22 T NUT |
| Centre Distance Between T Slots | 70 | 80 | 85 | 90 |
| Longitudinal Travel-X | 700 | 800 | 1000 | 1200 |
| Cross Travel-Y | 215 | 260 | 340 | 380 |
| Vertical Travel-Z | 450 | 510 | 600 | 650 |
| Min. Distance From Left Hand Table End to Spindle Center | 250 | 300 | 350 | 400 |
| SPINDLE | ||||
| No. of Feeds | 12 | 12 | 12 | 12 |
| Speed Range | 40 - 1200 | 40 - 1200 | 40 - 1200 | 40 - 1200 |
| Spindle Nose | ISO-40 | ISO-40 | ISO-40 | ISO-50 |
| Min,/ Max. Distance, Centre Milling Spindle/ Lower Face of Milling Spindle to Table Top Surface | 40-450 | 60-510 | 60-600 | 60-650 |
| Distance Spindle Centre to Column | 320 | 350 | 370 | 400 |
| Face Vertical Movement of Quill | 75 | 95 | 95 | 100 |
| Swivel of Milling Head On Either Side | 45o | 45o | 45o | 45o |
| FEEDS | ||||
| No. of Feeds | 18 | 18 | 18 | 18 |
| Long. Feed/Min | 23-420 | 23-420 | 23-420 | 23-420 |
| Cross Feed/Min | 23-420 | 23-420 | 23-420 | 23-420 |
| Vert. Feed/Min | 25628 | 25628 | 25628 | 25628 |
| Rapid long & Cross / Min | 1050 | 1050 | 1050 | 1050 |
| Rapid Vertical Min | 175 | 175 | 175 | 175 |
| POWER | ||||
| Main Motor (H.P) | 3 | 5 | 7.5 | 10 |
| Feed Motor (H.P) | 2 | 2 | 3 | 3 |
| Coolant Motor (H.P) | 0.1 | 0.1 | 0.1 | 0.1 |
| DIMENSIONS | ||||
| Length x Width x Height | 188 x 157 x 208 | 213 x 175 x 234 | 246 x 188 x 246 | 260 x 200 x 260 |
| Net Weight K.gs. | 2200 | 3200 | 3700 | 4500 |
| Gross Weight | 2600 | 3700 | 4300 | 5000 |
| MODEL | BCW-1 | BCW-2 | BCW-3 |
| Piston | 1 | 2 | 3 |
| HP | 1.5 | 3 | 4 |
| RPM | 950 | 600 | 540 |
| Suction Capacity | 10 | 18 | 22 |
| Pressure in PSI | 300 | 600 | 1000 |
| Suction Delivery Size in mm | 12*12 | 12*12 | 12*12 |
| Spray Nozzel | 6 | 12 | 20 |
| MODEL | Piston Displacement | Max. Pressure | No. of | Air Reciver | HP | ||
| cfm | M!/H | Kg/CM'G | PSIG | Cylinder | Ltrs | ||
| BE-5 | 2.98 | 5.05 | 7 | 100 | 1 | 45 | 0.5 |
| BE-10/1 | 3.73 | 6.32 | 7 | 100 | 1 | 70 | 1 |
| BE-15/1 | 6.78 | 11.49 | 8.79 | 125 | 1 | 92 | 2 |
| BE-30 S | 14.85 | 25.16 | 5.62 | 80 | 2 | 150 | 3 |
| BE-75 S-1 | 23.90 | 40.50 | 5.62 | 80 | 2 | 225 | 5 |
| BE-75 S-2 | 34.60 | 58.60 | 5.62 | 80 | 2 | 225 | 7.5 |
| BE-100S | 52.80 | 89.50 | 5.62 | 80 | 2 | 225 | 10 |
| BE-125S | 88.00 | 149.10 | 2.81 | 40 | 2 | 300 | 12.5 |
| BE-200S | 148.50 | 251.70 | 2.81 | 40 | 3 | 500 | 20 |
| MODEL | BCB-125 | BCB-100 |
| Bore Dia (without stand) | 65 to 125mm | 80 to 100mm |
| Bore Length | 275mm | 275mm |
| Spindle Speed | 1 Speed | 1 Speed |
| Motor RPM(1440)1Ph | 0.5 HP | 0.5 HP |
| Models | XH7125 |
|---|---|
| Table Size | 600 x 250mm |
| T-slot-dimension | 3 x 14 x 75mm |
| Distance from Floor to Table | 820mm |
| Max. load on table | 100kg. |
| Capacity | |
| X/Y/Z Axis Travel | 400 x 250 x 400mm |
| Dist. from Spindle Axis to Column Guide Way | 325mm |
| Dist. from Spindle Face to table top | 60 - 460mm |
| Guide Way | Box Type |
| Ball Screw Size & Pitch | Ø 25/25/32mm (X/Y/Z), Pitch: 8mm |
| Spindle | |
| Spindle Speed | 40 - 8000RPM |
| Spindle Power | 3.7 / 5.5 KW |
| Front Bearing Bore | Ø 45 / 75mm |
| Spindle Nose | BT30 |
| Accuracy | |
| Positioning Uncertainty | ± 0.005mm(JIS) |
| Repeat Positioning Accuracy | ± 0.003mm(JIS) |
| Feed | |
| Rapid Traverse (X, Y & Z) | 8000mm/min. |
| Cutting Feed | 1-3000mm/min |
| ATC | |
| ATC Type | Disc |
| Number of Tools | 10 |
| Tool Dia. Max. | Ø 92mm |
| Tool Weight Max. | 5 Kg. |
| Tool Length Max. | 200mm |
| Min. Time of Tool Change | 7 sec |
| Dimensions | |
| Weight (Approx.) | 1530 Kg. |
| Dimension (Approx.) (LxWxH) | 1650 x 1600 x 2000mm |
| Bandsaw Machine - Model | BMB-1 | BMB-1HS | BMB-10HS | BMB-2HS | BMB-3HS |
| Round | 175 | 175 | 250 | 300 | 350 |
| Square | 150X150 | 150X150 | 200X200 | 250 X 250 | 300 X 300 |
| Drive Motor H.P., RPM | 0.5,1440 | 1,1440 | 1.5,1440 | 2,1000 | 2,1000 |
| Coolant PumpH.P., Valts | 0.15,440 | 0.15,440 | 0.15,440 | 0.15,440 | 0.15,440 |
| Blade Speed Mtr/Min | 25 | 20 | 20 | 20 | 20 |
| 30 | 35 | 35 | 35 | 35 | |
| 35 | 55 | 55 | 55 | 55 | |
| 75 | 75 | 75 | 75 | ||
| Blade Size | 2540x20x0.9 | 3000x27x0.9 | 3860x27x0.9 | 4100x27x0.9 | 4420x34x1.1 |
| Approx Weight in Kg. | 300 | 350 | 750 | 800 | 900 |
| MODEL | BHS-12E | BHS-14E | BHS-16E | BHS-18E | BHS-24E | BHS-30E | BHS-36E | BH5-40E |
|---|---|---|---|---|---|---|---|---|
| Stroke | 12" | 14" | 16" | 18" | 24" | 30" | 36" | 40" |
| Rotary Table | 22" | 22" | 22" | 24" | 30" | 36" | 40" | 48" |
| Longitudinal Movement | 16" | 17" | 18" | 22" | 24" | 26" | 28" | 30" |
| Cross movement | 13" | 14" | 15" | 18" | 20" | 20" | 20" | 22" |
| Cutting Speed of Ram per Minute | 20-50-80 | 20-50-80 | 15-45-65 | 15-45-65-85 | 15-45-65-85 | 15-45-65-85 | 15-45-65-85 | 15-45-65-85 |
| Ram Adjustment | 16" | 17" | 18" | 20" | 22" | 24" | 24" |
| Model | BR – 25 |
|---|---|
| CAPACITY | |
| Drilling Capacity | 25 mm |
| Column Diameter | 127 mm |
| Spindle Nose | MT-3 |
| Spindle Travel | 200 mm |
| No. of Spindle Speed | 8 |
| Spindle Speed (RPM) | 110-2880 |
| Diameter of Ram | 72 mm |
| WORKING RANGE | |
| Max. Drilling Radius | 910 |
| Dist. from Spindle to base (Max/Min) | 810/130 |
| Dist. from Column to Spindle | 620/350 |
| ELECTRICAL | |
| Drilling Head Motor (1440RPM) | 1 H.P |
| Lifting arm Motor (1440RPM) | 0.5 H.P |
| V-BELT Section | B-40 & B-23 |
| OTHER | |
| Machine Measurement | 1020 x 810 x 1830 mm |
| Size of box TABLE | 250 x 205 x 205 mm |
| Approx Weight (Kg.) | 425 |
| Lathe Machine Models | ||||
| Admit Between Centers | ||||
| Capacity | ||||
| Height of Center | 500 | 550 | 600 | 750 |
| Width of Bed | 500 | 550 | 600 | 750 |
| Max. Swing | ||||
| over bed | 1000 | 1100 | 1200 | 1500 |
| over Slide | 700 | 800 | 900 | 1200 |
| in Gap | 1280 | 1360 | 1450 | 1750 |
| Spindle | ||||
| Bore | 100 | 100 | 125 | 125 |
| Nose | 6 TPI | 6 TPI | 6 TPI | 6 TPI |
| Speed -8 | 30 to 600 | |||
| Travel | ||||
| Cross Slide | 500 | 500 | 500 | 500 |
| Top Slide | 250 | 250 | 250 | 250 |
| Other | ||||
| Lead Screw TPI | 2 TPI | 2 TPI | 2 TPI | 2 TPI |
| Tail Stock Sleeve | MT-5 | MT-5 | MT-5 | MT-5 |
| Power Required | 7.5 H.P. | 7.5 H.P. | 10 H.P. | 10 H.P. |
| Model | CD-4 | CD-5 | CD-6 | CD-7 |
| 9' | 1450 | 1450 | 1350 | 1250 |
| 10' | 1750 | 1750 | 1650 | 1550 |
| 12' | 2350 | 2350 | 2250 | 2250 |
| 14' | 2950 | 2950 | 2850 | 2750 |
| 16' | 3550 | 3550 | 3450 | 3350 |
| 18' | 4150 | 4150 | 4050 | 3950 |
| 20' | 4750 | 4750 | 4650 | 4550 |
| 22' | 5350 | 5350 | 5250 | 5150 |
| 24' | 5950 | 5950 | 5950 | 5950 |
| 30' | 6500 | 6500 | 6500 | 6500 |
| Model | No | BJN-0 | BJN-1 | BJN-2 | BJN-3 | BJN-4 | BJN-4 | BJN-5 | BJN-5 |
| Drive | Hand | Motorised | Hand | Motorised | Hand | Motorised | Hand | Motorised | |
| Working center of roll | mm | 38 | 38 | 51 | 51 | 76 | 76 | 76 | 76 |
| inch | 1 1/2 | 1 1/2 | 2 | 2 | 3 | 3 | 3 | 3 | |
| Max thick cap in M.S | mm | 0.7 | 0.7 | 0.9 | 0.9 | 1.2 | 1.6 | 1.2 | 1.6 |
| swg | 22 | 22 | 20 | 20 | 18 | 16 | 18 | 16 | |
| Max depth of gap | mm | 75 | 100 | 125 | 150 | 125 | 125 | 150 | 150 |
| inch | 3 | 4 | 5 | 6 | 5 | 5 | 6 | 6 | |
| Power Req 1440 RPM | H.P | - | - | - | - | 2 | - | 2 |
| Model No. | BPB 25 (Mechanical) | BPB 50 (Mechanical) | BPB 50 (Hydraulic) | BPB 75 (Hydraulic) |
| Tube OD x Thickness | 25X2 mm | 32 X 2 mm | 50×4 mm | 75X4 mm |
| Square | __ | __ | 40 x 40 x 3 mm | 65 x 65 x 3 mm |
| Rectangular Tube | – | – | 30 x 40 x 4 mm | 40 x 60 x 40 mm |
| Higher Radius | __ | __ | on request | on request |
| Minimum Radius Possible | 2.5 D (D=Tube Dia) | 2.5 D (D=Tube Dia) | 2.5D (D=Tube Dia) | 2.5 D (D=Tube Dia) |
| Bend Angle | 10 to 180° Degrees | 10 to 180° Degrees | 10 to 180° Degrees | 10 to 180° Degrees |
| Bending Speed | 4 rpm | 4 rpm | 0-90 -°/10SC | 0-90 -° /15SEC |
| Bending Direction | Clockwise & Anticlockwise | Clockwise & Anticlockwise | Clockwise & Anticlockwise | Clockwise & Anticlockwise |
| Bend Accuracy | ±1°-2° | ±1° -2° | ±1°-2° | ±1°-2° |
| Tube Indexing | Manual | Manual | Manual | Manual |
| Tube Positioning | With Suitable Fixture | With Suitable Fixture | With Suitable Fixture | With Suitable Fixture |
| Length Setting | Manual | Manual | Manual | Manual |
| Tube Holding Controls | Manual | Manual | Manual | Manual |
| Power | 2 HP | 2 HP | 5 HP | 7.5 HP |
| Model | TR-24B | TR-42D | TR-80A |
| Work Piece (in Feed) | 3-24 mm | 3-50 mm | 10-80 mm |
| Max. Pitch of Thread (Standard V Thread) | 3 mm | 5 mm | 10 mm |
| Max. Serrations Pitch | 1.0 mm | 1.6 mm | 3 mm |
| Max. Die. Width | 80 mm | 150 mm | 200 mm |
| Max. Through Feed Thread Length | 6 meter | 6 meter | 6 meter |
| Max. Rolling Force (infinitely adjustable) | 6 tons | 16/20 tons | 30 tons |
| Spindle Axis Swivel for through Feed | 50 | 50 | 120 |
| Roll Spindle | 40 mm | 4 mm | 69.85 mm |
| Max. Rolling Die | 120 mm | 180 mm | 220 mm |
| Roll Spindle Speed (RPM) | 60/90 | 20/40/60 | 16/22/34/73/110/150 |
| Main Motor (H.P.) | 3 | 5/7.5 | 15 |
| Hydraulic Power Pack Motor (H.P.) | 1 | 2/3 | 3 |
| Coolant Pump | 1/8 H.P. | 1/8 H.P. | 1/2 H.P. |
| Electrical Connection | 415 V. 50 Hz, 3 Phase | 415 V. 50 Hz, 3 Phase | 415 V. 50 Hz, 3 Phase |
| Appx. Weight | 1000 Kg. | 2200 Kg. | 3500 Kg. |
| Model No. | Max Cap Lenth xThick mmxmm(SWG) | Roll Dia. |
| BRS-1 | 450x1.2(18) | 51 |
| BRS-2 | 650 x0.9 (20) | 51 |
| BRS-3 | 1000x0.7(22) | 51 |
| BRS-4 | 1250x0.5(24) | 51 |
| BRSG-1 | 450 x1.6 (16) | 51 |
| BRSG-2 | 650 x1.2 (18) | 51 |
| BRSG-3 | 1000x1 (19) | 51 |
| BRSG-4 | 1250x0.9(20) | 51 |
| Model No. | Max Cap Lenth xThick mmxmm(SWG) | Roll Dia. | |
| BRSG-1 | 450x1.2(18) | 51 | 0.5 |
| BRSG-2 | 650 x0.9 (20) | 51 | 0.5 |
| BRSG-3 | 1000x0.7(22) | 51 | 1 |
| BRSG-4 | 1250x0.5(24) | 51 | 1 |
| HBRSGM-2 | 450 x1.6 (16) | 101 | 3 |
| HBRSGM-3 | 650 x1.2 (18) | 101 | 4 |
| HBRSGM-4 | 1000x1 (19) | 101 | 5 |
| Grease Pumps | Hand | Hand | Hand | Pnuematic | Pnuematic |
| MODEL | BEG-5 | BEG-10 | BEG-20 | BEG-25 | BEG-50 |
| Drum Capacity | 5 kg | 10 kg | 20 kg | 25 kg | 50 kg |
| Output Pressure Approx. | 3 gm/stroke | 3 gm/stroke | 3 gm/stroke | 300-400gm/min | 300-400gm/min |
| Working Pressure | - | - | - | 4-10Kg/Cm2 | 4-10Kg/Cm2 |
| range of Air | |||||
| Recommended working | 8-Kg/Cm2 | 8-Kg/Cm2 | |||
| Pressure of Air. | 12*12 | 12*12 | 12*12 | ||
| Normal Blocked Pressure | 140 Kg./ Cm2 | 140 Kg./ Cm2 | 140 Kg./ Cm2 | 400 Kg./ Cm2 |
| Model | BS 150 | BS 250 |
| Stroke | 10 to 150 mm | 10 to 250 mm |
| Longitudinal Move. | 200 mm | 230 mm |
| Cross Movement | 110 mm | 230 mm |
| Speed adjustment | 3 Speed | 3 Speed |
| Ram Adjustment | 150 mm | 250 mm |
| H.P. | 1 H.P. | 1.5 H.P. |
| A | 210 mm | 330 mm |
| B | 310 mm | 410 mm |
| MODEL | BCB-125 | BCB-100 |
| Bore Dia (without stand) | 65 to 125mm | 80 to 100mm |
| Bore Length | 275mm | 275mm |
| Spindle Speed | 1 Speed | 1 Speed |
| Motor RPM(1440)1Ph | 0.5 HP | 0.5 HP |
Priyanshu Shah (Bhavya machine tools)
A-601, Sapath –IV, Opp. Karnavati Club, S.G.Highway Road, SG Highway, Ahmedabad, Gujarat - 380051, India
Share us via
