Double Column Machine in Bhavnagar

• MOQ : 10000 Piece
• Brand Name : Maan
• Spindle Travels : 325mm ( Auto/manual )
• Number of Auto Feeds : 4/0.10 - 0.25
• Number of Spindle : 16/40
• Model Name/number : Maan 60x16/1500
• Arm Elevating Motor : 2 HP
• Number of Spindle Speeds : 2000 RPM
• Drilling Head Motor : 5 HP

Key Features: Main Spindle is made of "EN8" material MT-bore internally grinded Accuracy and run out of 0.01 to 0.04 in main spindle shaft Pinion Shaft is made of "EN8" material Provided 4-8 speeds by accurate balancing Spindle sleeve-grinded Work light[As per requirement] Full size work table with accurate r more...

• MOQ : 10000 Piece
• Frequency : 50Hz
• Power : 2HP
• Voltage : 415V
• Brand Name : Maan
• Approxly Weight : 1700kg
• Machine Measurement : 1300 X 1170 X 1870mm

Features: Fabrication Table for the Machine Milling Adaptor Attachment for the Machine Coolant Pump with Fitting Coolant tank for Pump Machine Lamp Rotary Table Drill Chuck with Key & Arbor Drill Sleeve Drill Vice Special T-Bolts Foundation Bolt more...

• MOQ : 1 Piece
• Vertical Traverse of Arm : 740 mm (Auto)
• Drilling Capacity In Steel : 60 mm ( Having 600 Mpa Tensile Strength)
• Drilling Radius : 500/1470 mm
• Drilling Head Motor : Drilling Head Motor
• Drilling Capacity In MS : 62 mm ( Having 200 Mpa Tensile Strength )
• Max Tapping Capacity : 50 mm
• Wooden Packing Dimension : 2300 x 1000 X 2450 mm
• Working Surface : 1400 x 970 mm
• Power Supply : 415V,3 Phase,50 Hz

Features: Main Spindle is made of "EN8" material MT-bore internally grinded Accuracy and run out of 0.01 to 0.04 in main spindle shaft Pinion Shaft is made of "EN8" material Provided 4-8 speeds by accurate balancing Spindle sleeve-grinded Work light[As per requirement] Full size work table with accurate right more...

• Range of Autofeed (mm/rev) : 0.13-1.10 mm/rev.
• Spindle Quill / Ram Movement : In Cylinder Liner Bush
• Locking System : Manual -separate Lock for Arm Radial Movement and Arm Up-down Movement
• Vertical Travel of Arm : 740
• Drive : Left Hand
• Max / Min Dist. Of Spindle center to column : 1700/700
• Tapping in M.S. : 50
• Supply Type : Manufacturer
• Spindle Taper : MT-5
• Box Table : 560 x 460 x 400

Safety: Autofeed safety clutch system Arm maximum upside limit switch Arm Maximum lower size limit switch Arm Lock Limit Switch Spindle Maximum and minimum stroke limit switch more...

• Spindle Quill / Ram Movement : In Cylinder Liner Bush
• Column Structure : Double Column
• Spindle Taper : MT-4
• Supply Type : Manufacturer
• Drilling in MS : 50
• Diameter of Ram (quill) : 80
• Spring : Heavy Duty Compression Spring
• Spindle Travel : 255
• Max / Min Dist. Of Spindle center to column : 1400/615
• Diameter of Column : 280

more...

• No. of Spindle Speeds : 12 (all 12 Speeds Through Gears Only and Not By 2 Speed Motor)
• Box Table : 560 x 460 x 400
• Spindle Travel : 330
• Drilling in C.I. : 80
• Diameter of Ram (quill) : 90
• No. of Autofeed : 6
• Supply Type : Manufacturer
• Spindle Taper : MT-5
• Spindle Quill / Ram Movement : In Cylinder Liner Bush
• Elevating Motor : 3 HP / 960 RPM / Flange mounted

more...

• MOQ : 1 Piece(s)
• Brand Name : All Geared Double Column Radial Drilling Machine

We offer All Geared Double Column Radial Drilling Machine. Some important features: 1. Specially designed heavy duty hardens & grounded drilling head. 2. Precision anti friction bearing for all rotating members. 3. Auto as well as manual feeds. 4. Speed range to suit various operations. 5. Coolant Pump with b more...

we offer All Geared Double Column Radial Drilling Machine. Some important features: 1. Specially designed heavy duty hardens & grounded drilling head. 2. Precision anti friction bearing for all rotating members. 3. Auto as well as manual feeds. 4. Speed range to suit various operations. 5. Automatic Adjustabl more...

• MOQ : 1 Piece(s)
• Supply Type : Manufacturer

Model: JIDC50 Drilling Cap. in M.S. 50mm Tapping Cap. 30mm Boring Cap. 120 mm Drilling Radius: 1500mm Spindle Travel: 250 mm Spindle Speed Ranges: 8  Autofeed Ranges: 6 more...

• Supply Type : Manufacturer

Located in Gujarat, India, we are instrumental in manufacturing and supplying top of the line quality JIDC42 Double Column Heavy Duty Radial Drilling Machine to all our worthy buyers. Ours is a heavy-duty drilling machine that is designed as per the stated quality norms. Moreover, the Drilling Machine is obta more...

• Machine Weights : 2800 Kg.
•  Cutting capacity : 340mm ø 340 mm
•  Hydraulic Motor : 1.5 HP
•  Drive Motor : 5 HP
• MODEL : DCM- 340
• Blade Size : 4650 X 34 X 1.1 mm
• Band Tension : Hydraulic
• Coolant Motor : 0.15 HP
• Overall Size L x W x H : 2050 x 1950 x 1750  

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time. Vartical Saw Head up down motion is controlled by two Hydraulic cy more...

Vertical saw Head is supported rigid induction hardened & hard crome plated & ground guide Columns. Blade tensioning is done by ManualHydraulically operated cylinders. Auto height sensor optimizes ideal position of blade with least down time. Drive and driven band wheels with optimum centre distance gives smo more...

• Brand/Make : Four Star
• Power Source : Electric
• Frequency : 60 Hz
• Price Range : 50 Lakh-3 Crore / Unit
• Automatic Grade : Automatic
• Voltage : 440 V
• Phase : 2

Features : FANUC 0iMF + 10.4"LCD Spindle cooler Spindle air blast N2 Counter balance GTP 2G250 H/L gearbox Independent auto lubrication system Program end alarm lamp Rigid Tapping Electric cabinet heat exchanger : USB/RS232/hinet interface Coolant system Twin spirl type chip remover Metal belt chip conveyor w more...

• Power Source : Electric
• Automatic Grade : Automatic
• Max Spindle Speed : 3000-4000 rpm
• Brand Name : Four Star
• Condition : New
• Power Load(HP) : 5-10 HP
• Price Range : 50 Lakh-3 Crore / Unit
• Surface Treatment : Color Coated
• Max Swing Over Bed : 750-1000 mm
• Material : Mild Steel

Standard Accessories : FANUC 0iMF + 10.4"LCD Spindle and Gear-box cooler Spindle air blast Cutting coolant system Auto lubrication system Rigid tapping Electric cabinet heat exchanger Program end alarm lamp Ethernet/USB/RS232 interface GTP 2G250 H/L gearbox Air/Water cleaning equipment Twin spiral type chip r more...

• Layout : Vertical
• Power Source : Electric
• Brand/Make : Fulltontech
• Speed Range : 50-3500 RPM
• Lathe Machine Type : Vertical Lathe,Single Axis
• Condition : New
• Price Range : 50 Lakh-3 Crore / Unit
• Voltage (Volt) : 440

Features : Siemens/Fanuc ATC/Tool changer: 6 stations servo type with Hirth coupling for each toolpost. Enclosure guard with cooling system and chip conveyor Two CNC Rams Grinding attachment more...

• MOQ : 1 piece
• Cutting Capacity : 1550 x 650
• Condition : New
• Voltage : 440V
• Size : 1550X650 MM
• Warranty : 1 YEAR
• Color : Blue
• Supply Type : Manufacturer
• Blade Material : M42
• Driven : Hydraulic

We are manufacturing and supplying a variety of Metal  cutting  Special Purpose  Band Saw Machines . All these machines are manufactured under the close supervision of our highly experienced engineers at our multifaceted infrastructure facility. Also, our quality controllers inspect these machi more...

• MOQ : 1 piece
• Brand Name : Accucut
• Country of Origin : India
• Supply Type : Manufacturer
• After-Sales Service Provided : Yes
• Warrenty : 1year

We are a coveted organization that is engaged in manufacturing and supplying superior quality  Double Column Band Saw Machines.  The spare parts and components used for manufacturing are sourced from most trusted and reliable vendors of the market. These  Double Column Band Saw Machines  are widely acknow more...

• Weight : 100-1000kg
• Type : Bandsaw Machine
• Warrenty : 1year
• Supply Type : Manufacturer
• Color : Multi Colour
• Power : 7-9kw, 5-7kw, 3-5kw, 1-3kw
• Automatic Grade : Automatic
• Certification : CE Certified

Being an eminent name in the global market, we are offering excellent quality Double Column Bandsaw Machine to our clients. The cutting length of our Double Column Bandsaw Machine is much precise and the cutting angle is optional. Our Double Column Bandsaw Machine supports features like auto feeding and cutti more...

• Color : Light Green
• Automatic Grade : Fully Automatic
• Weight : 100-1000kg
• Voltage : 220V
• Warranty : 1year
• Certification : CE Certified
• Driven Type : Electric
• Power : 1-3kw, 3-6kw
• Type : Drilling Machine
• Supply Type : Manufacturer

Column Drilling Machine manufactured by us is the right choice for modern-day production needs. Easy to operate and control, the Column Drilling Machines are designed to handle every type of drilling operation with ease. Available with a set of standard as well as optional accessories, the Column Drilling Mac more...

• MOQ : 1 Piece
• Material : Mild Steel
• Voltage : 220V,240 V
• Surface Treatment : Paint Coated
• Power : 1-3kw,12 HP
• Country of Origin : India
• Certification : ISO 9001:2008
• Automatic Grade : Fully Automatic
• Capacity : 120 Kg/Hr
• Supply Type : Manufacturer

more...

• MOQ : 1 Piece
• Automatic Grade : Automatic
• Power : 1-3kw,12 HP
• Blade Speed : 1440 RPM
• Voltage : 220V
• Supply Type : Manufacturer
• Material : Mild
• Country of Origin : India
• Certification : ISO 9001:2008
• Blade Size : 3760 x 27 x 0.9cm

more...

• MOQ : 1 Unit
• Dimension : 2250 x 1260 x 1700 mm
• Weight : 1000 kg
• Automatic Grade : Semi Automatic
• Work Height : 660 mm
• Motor : 4 kW
• Model Name : MEBAeco 300
• Supply Type : Supplier
• Saw Blade Size : 4115 x 34 x 1.1 mm
• Application : Industrial

more...

• MOQ : 1 Unit
• Motor : 7.5 kW
• Country of Origin : India
• Dimension : 2950 x 1500 x 2000 mm
• Supply Type : Supplier
• Model Name : MEBAeco 500
• Saw Blade Size : 6200 x 41 x 1.3 mm
• Automatic Grade : Semi Automatic
• Application : Industrial
• Weight : 2200 Kg

more...

• MOQ : 1 Unit
• Saw Blade Speed : 20-80 m/min
• Dimension : 2500 x 1260 x 1700 mm
• Automatic Grade : Semi Automatic
• Motor : 7.5 kW
• Model Name : MEBAeco 400
• Supply Type : Supplier
• Saw Blade Size : 5150 x 41 x 1.3 mm
• Country of Origin : India
• Brand Name : MEBA

more...

We offer 50mm heavy duty double column radial drill machine. Cap. 50mm all geared heavy duty radial drill machine with auto feed, double column and electrical. more...

• Supply Type : Manufacturer

Heavy duty –40mm drilling in steel 8 spindle speeds and 2 auto feeds for drilling, tapping, reaming operations auto feed, auto lift and double column and with electrical all gears are made of alloy steel, nitride hardened & lapped running in oil bath fitted with splined shafts precision hardened and ground more...