White dextrin is produced at low temperatures and with short reaction times in the presence of appropriate concentrations of catalyst to achieve the desired level of cold water solubility and color. Variety of catalyst can be used depending upon the specific property desired. Itīmore...
White dextrin is produced at low temperatures and with short reaction times in the presence of appropriate concentrations of catalyst to achieve the desired level of cold water solubility and color. Variety of catalyst can be used depending upon the specific property desired. Itīmore...
Yellow dextrin is manufactured by partially hydrolyzing starch, using the dry roasting method in the presence of a catalyst. VISCO yellow dextrin comes with wide range of specifications such as solubility, viscosity, pH, Color. It is manufactured from best quality of starch specimore...
White dextrin, White Dextrin are prepared by heat treatment in presence of chemicals to suitably modify characteristics and properties of starch. Unlike starch dextrin are soluble in water. The severity of the treatment determines the degree of solubility, which is the basis of cmore...
Yellow dextrin, Yellow dextrin is manufactured by partially hydrolyzing Starch, using the dry roasting method in the presence of a catalyst. Yellow dextrin has low viscosity and is very sticky and hygroscopic in nature. Yellow Dextrin Powder helps in increasing dry strength at thmore...
Pasting Gum is specially developed for use in the corrugated paper packaging boards having the advantages of consistency and perfection in terms of quality. This gum is mainly used in automatic and semi automatic plants. Pasting Gum is partially hydrolyzed starches that are prepamore...
BRONCO® DURA NSA is a ready to use, thin or thick bed, water resistant, premixed single component, cementitious polymer modified multipurpose tile adhesive Area Of Application Bonding Ceramic Vitrified tiles to concrete surfaces floors and walls It can also be used formore...
BRONCO® DURA FIRM is a high polymer modified, white cement based tile adhesive suitable for fixing wall and floor tile & natural stone Area Of Application Wall and floor tiles Mosaics Vitrified and fully vitrified tiles Marble Terrazzo and natural stone Advamore...
BRONCO® DURA FLEX is a ready to use, thin or thick bed, water resistant, preâmixed single component, cementitious polymer modified high strength tile adhesive. Area Of Application Fixing Ceramic Vitrified Mosaic Marble and Granite Tiles Advantages Can be used more...
Application : Suited For Exterior And Interior Installation Of Tiles
Features : Permanent tile fixing resistant to complete immersion Excellent quality Cost-effective Application : Can be used for interior applications on floors and walls over masonary, concrete, mortar beds and cement plaster. more...
Product Description Polymer modified cementitious HomeSure Tile Adhesive HomeSure Tile Adhesive is cement based general tile adhesive. It contains highest grade of graded sand, cement, selected fillers, polymers and chemical additives to give it unique properties Silver Star â more...
Temperature Resistance : 30 Degree C to 150 Degree C
Application : Rubber Cleaning
Color : Blue
Form : Liquid
Rubber Renue restores old rubber parts that have become hard and lost their tackiness and flexibility. Firstly, it causes the rubber part to swell, allowing dirt to come out of its pores. Later, the solvent dries and the rubber returns to form, but tacky again, so rollers and plamore...
This heatsink adhesive paste is a 2-part, 1-1 epoxy system. It is a smooth, dark grey paste that cures to form a hard, durable, thermally conductive polymer. It provides strong electrical insulation and excellent protection from humidity, salt water, mild bases, and aliphatic hydmore...
Anaerobic adhesives are the type of adhesives that cure or harden in the presence of active metals and in the absence of oxygen. These adhesives are commonly malleable until enclosed in the absence of air between close fitting active metal surfaces. Anaerobic adhesives are commonmore...
Cyanoacrylate adhesive is a type of instant adhesive that is designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile or shear strength. This adhesive used for the rapid bonding of a wide range of materials, including plasticmore...
We deal in Ultraviolet Light Curing Adhesive that is cured in seconds when exposed to visible or ultraviolet lights, heat or activator. The Ultraviolet Light Curing Adhesives are known to enable 100% in-line inspection. Also, the speed of automated assembly can easily be utilizedmore...