BHARAT TRADING CORPORATION

Budhwar Peth, Pune, Maharashtra

• Adapted to EN 50288-7.

• Conductor : Annealed copper wires according to BS EN 60228
• Insulation : Polyvinyl chloride PVC
• Pairs : Twisted
• Identification Pairs : Black & white, continuously numbered on white core (1, 2, 3) for multi-element
• Wrapping : 1 layer of PETP tape
• Collective Screen : Aluminium / PETP tape over tinned copper drain wire
• Cable Sheath : Polyvinyl Chloride PVC
• Colour : Black. Blue for intrinsically safe system

• Flame Propagation : EN 60332-1-2
• Operating Temperature Range : -30C to +70C
• Bending Radius : 7.5 x cable diameter
• Operating Voltage : 500V
• *Also available in 300V variant on request
• Marking : RR KABEL n x m x a RE-Y(St)Y 500V EN 50288-7 CE + 0001m
• n No. of pairs, m Pairs, a Cross sectional area

• PVC Heat Shrinkable Lay Flat Tubing provides the perfect electrical insulation for Bus bars of low tension systems in control panels & switchgear systems. Bus bar sleeves are an excellent latest modern technology for insulation compared to age old conventional method of taping and painting etc.
• Our Product is available from 17mm width to 300mm width and in thickness ranging from 80 microns to 400 microns for the complete range of Bus Bar and which covers the variations as required by local/export units. Apart from the regular colours of Red, Yellow, Blue, Black & Green, our innovative in-house team has also developed new colour like BROWN, GREY & WHITE and hence adding a new dimension of colour to the Busbar range.

• Jainson Cable Terminal Ends (Lugs) conforms to Indian and International Standards of quality, and therefore are on approval list of NTPC, ONGC, Railways, Electricity Board, Defense & various consultants.
• Cable Terminal Ends (Thimble) come in a very wide range.
• There being more than 2100 items consisting of sizes from 0.5mm to 1000mm.
• These products conforms to IS/BS & DIN specification.

Description :-

• Jainson being at the fore front in manufacture & supply of Cable Terminal Ends, Crimping Tools & various allied product, as a new venture diversified into manufacture & supply of Brass Cable Glands in the year 1997.
• Jainson Cable Glands is supplied to all major OEM's like L & T, Siemens, BHEL, ABB, Crompton Greaves, Secure Meters, Vijai Electricals Ltd., Bhushan Steel & Strips, Anupam Industries Ltd., WMI Cranes Ltd. to name a few.
• Jainson Cable Glands conforms to BS 6121 & IS 12943.
• Jainson Cable Glands come in a very wide range like - flame proof cable gland, long nipple type cable gland, weather proof cable gland, light duty cable gland, heavy duty cable gland, brass cable gland, single compression siemens type brass cable gland, flance type brass cable gland, double compression flame proof type brass cable gland, double compression weather proof type brass cable gland, etc.

• Insulated Terminal Crimping Tool, Pliers, Open Barrel Tab Terminal Crimping Tool, End Sealing Ferrules Crimping Tool (Dieless), Heavy Duty Compression Tool, Hydraulic Tools, Hydraulic Dieless, Hydraulic Foot Operated, Hydraulic Crimping Tool.

We are the main supplier of this product.

• Manufactured using 99.9% Pure Electrolytic Grade Copper having more than 100% conductivity to ensure minimum power losses and maximum safety.
• Double Insulation with virgin PVC Compound coated with ultra thin color layer having Flame Retardant Properties for high oxygen and Temperature Index.
• Bunching of Copper in uniform lay and diameter makes it energy efficient Cables.
• Insulated with Anti-Termite and Anti Rodent properties.
• ISI marked wires meet the latest requirements of IS: 694/2010 of Flame Retardant properties ensuring extra protection against electric shocks, short circuits and fires.

• Manufactured using 99.9% Pure Electrolytic Grade Copper having more than 100% conductivity to ensure minimum power losses and maximum safety.
• Mainly used to provide power to submersible pump motors.
• Conductor shall be of Class-V as per IS:8130/1984.
• Insulated with Special PVC Compound to provide safety from mechanical damage, abrasion & corrosion.
• Sheathing material provides resistance to oil, moisture & superior mechanical strength without losing its flexibility.
• Light in weight and smaller bending radius. Easier in Jointing and Termination.
• Higher Current Carrying Capacity and higher overload capacity.
• ISI marked meet the latest requirements of IS: 694-2010 ensuring extra protection against electric shocks, short circuits and fires.

• Manufactured using 99.9% Pure Electrolytic Grade Copper having more than 100% conductivity to ensure minimum power losses.
• Bunching of Copper in uniform lay and diameter makes it energy efficient Cables.
• Insulation & Sheathing by specially formulated PVC Compounds for long life.
• Sheathing material provides resistance to oil, moisture and superior mechanical strength without losing its flexibility.
• Manufacturing in our state-of-the-art plant at Gurgaon (Haryana) INDIA.
• ISI marked wires meet the latest requirements of IS: 694-2010 ensuring extra protection.
• Reliable & Consistent quality at competitive prices.

SGI Telephone Cables

• Manufactured by using 99.9% Pure Electroltic Grade Solid Bare Copper Conductor.
• Mainly used for Telephone Wiring for indoor use, EPABX Systems, Telephone Exchanges etc.
• Insulated with Poly Ethylene / PVC materials.
• Sheathed with specially formulated PVC for long life.
• Low Attenuation and Low Crosstalk.
• Manufactured as per TEC specification G/WIR-06/02.
• Shielded with Polyester Tape to protect from Outside.

• PVC and FR PVC 70C cables suitable for wiring in residential and commercial infrastructure.
• HR PVC 85C cables are suitable for wiring in residential and commercial infrastructure for a higher ambient temperature.
• FR-LSH cables are suitable for wiring in public places like schools, hospitals, theatres, etc.

• Approvals : IS 694 marked, FIA/TAC
• Conductor : Electrolytic grade annealed copper Class 5 as per IS 8130
• Standard Cable Colour : Black, grey & white
• Voltage Rating : Up to and including 1100V
• Packing : Standard packing of 100 mtr. in coil. Longer length available on request

• For use as a data and control cable in machinery, computer systems etC as well as a signal cable for electronics. The high level of screening ensures a high degree of interference protection. The screening density assures disturbance-free transmission of all signals and impulses. The PVC-inner sheaths of those cables raise the mechanical stress. Such cables can also be used for outdoor applications for the permitted temperature range.

• Standard : Adapted to EN 50525-2-51
• Nominal Voltage : U / U 300 / 500 V O
• Insulation Resistance : Min. 20 G x cm
• Temperature Range : Flexing -5C to +70C.
• Fixed installation -30C to +70C
• Minimum Bending Radius : Flexing 20 x cable . Fixed installation 6 x cable
• Test Voltage : 4000V

• Bare copper, fine wire conductors, bunch stranded EN 60228 Cl. 5.
• Core insulation of PVC TI2, EN 50363-3.
• Black core with continuous white numbering to DIN VDE 0293.
• Green/yellow earth core in outer layer (3 cores and above).
• Cores stranded in layers with optimal lay-length.
• Special PVC inner jacket.
• Tinned copper braided screen.
• Special polyurethane outer sheath (PUR).
• Sheath colour : Grey (RAL 7001).

• These are special PVC data cables used for flexible use with free movement without tensile stress of forced movements in dry, moist and wet rooms but not suitable for open air, wherever the construction requirements call for a minimum outer diameter.

• Standard : Based on VDE 0812
• Nominal Voltage : 0.14 mm = 350 V; >/= 0.25 mm = 500 V
• Insulation Resistance : Min. 20 G x cm
• Temperature Range : Flexing -5C to +70C.
• Fixed installation -30C to +70C
• Minimum Bending Radius : For flexible use 10 x cable
• Test Voltage : Up to 0.25 mm = 1200 V. From 0.34 mm = 2000 V
• Breakdown Voltage : Up to 0.25 mm = 2400 V. From 0.34 mm = 4000 V

• Bare copper, fine wire conductors, bunch stranded DIN VDE 0295 cl. 5, EN 60228 cl. 5.
• Special PVC core insulation TI2, to EN 50363-3.
• Conductor make-up for 0.14 mm = 8 x 0.10 mm., 0.25 mm = 14 x 0.15 mm., 0.34 mm = 19 x 0.15 mm.
• Core colours as per DIN 47100.
• Cores stranded in layers with short lay-length.
• Special PVC outer sheath TM2, to EN 50363-4.1.
• Colour grey (RAL 7032).

General :-

• SURAJ Cam Switches S Series are developed on world renown cam/butt contact design concept. S Series switches are manually operated, rotary action, air break type, rugged in construction, compact in size, assembled on modular construction and provide verstality with no compromise on quality and performence levels. These Unique design features permit many variety of switching arrangements in multiposition, thus making these preferred for control circuits and small motor loads in varied industrial, commercial, professional and defence applications.

Rating :-

• 6, 10, 16, 32 Amps

Design :-

• Cam Switches S Series incorporate cam operated silver-alloy butt contacts with double-break feature. Switches have modular construction and operated by an easy grip knob. Modules moulded from selected engineering plastics of antitracking quality are stacked together to form an assembly and each module houses 2 sets of electrically independent, fixed and moving contacts.

Terminal :-

• These are fixed contacts recessed type fitted with clamps and captive screws for easy wiring. Crimpping lugs of suitable size are recomended for wiring.

• "SURAJ" makes, hand operated, Rotary Switches, in open execution which incorporate rotary action, air break type Silver / Gold Plated wiping contacts, housed in an assembly of packets molded from anti-tracking thermosetting plastics. The stationary and moving contacts are operated by actuating mechanism to achieve desired switching action.
• Switch assembly is on packet principle giving choice of multi-position and multi-circuits, also makes complex switching combinations possible Switches are designed for ON LOAD switching and present range covers standard Rotary switches upto 100A/440 V.AC, upto 4 Poles & 8 position standard operations.Switches are used for make-break and isolation of power circuits and switching of auxiliary circuits.

• Rating: 16A, 25A, 32A, 40A, 63A & 100A / 440 VAC
• Switching position: ON-OFF , 2 positions - 8 positions with and without OFF
• Specifications: Switches conform to IS 13947 (Part I & II) 1993

• Flush at the back of panel
• Flush at the front of panel (Base Mounting)

• "SURAJ" toggle switches employ rocker-type contact mechanism, housed in an anti-tracking molded case (Bakelite / Melamine) with dust free performance. ( They are available with single pole and double pole - two or three positions, having Stay Put and momentary contacts. )
• Application of these switches include Electronic Instruments & Equipments Electro Medical Equipments, Computer & Engineer Machines, Elevators, Process Control, Rectifier Equipments, Telecommunication Equipments, Machine Tools, Instrumentation, Machine, Control Panel, Transport, Aircrafts, DOmestic Appliances, Cine Equipments, Automation.
• Case : PBT / Melamine
• Actuator : Brass with chrome Plating
• Panel Thickness : 5 mm ( max)
• Operating Range : SPST, SPDT ( ON-ON center-off ) & Momentry action DPST, DPDT ( ON-ON, Center off ) & Momentry action

• SURAJ Micro Switches Type SM3 series (SPDT) are unsealed sensitive light weight momentary switches featuring snap action contact movement, high electrical rating and long life. These switches are precision built and small in size and shape of international design standards to meet requirements of numerous AC & DC applications where repeat accuracy is an essential need. SM3 Switches are operated by small force or movement either directly acting on the plunger or through a wide range of integral and auxiliary actuators including roller type and push buttons.
• Circuitry: Single Pole, Double Throw
• Terminals : Screw, Solder
• Temperature Range : -55/+85C
• HV Test : Switches stand 1.5KV for 1 minute
• Operating Range : SPST, SPDT ( ON-ON center-off ) & Momentry action DPST, DPDT ( ON-ON, Center off ) & Momentry action

• Current Rating: 2 AMPS.
• Voltage Rating: 250 V.AC
• Temperature Range: -30oC to 75 oC
• Dielectric Strength: 2500 Vrms between the conductors.
• Insulation Resistance: 20MW (Min) at 500 VDC

• Insulator: Phenolic Black / Anti - Tracking Melomine
• Connector: Brass with .0001" thick Nickel over it.
• Screw: Combination Head, over .0001" thick Zinc over Steel.

• 16A / 440V AC ON - OFF Switches 1 - 4 poles
• Specially used in Grinder

• Current Rating: 30 AMPS & 100 AMPS.
• Voltage Rating: 500 V WITH END PLATE
• Temperature Range: -30oC to 75 oC
• Dielectric Strength: 22500 Vrms between the conductors.
• Insulation Resistance: 20MW (Min) at 500 VDC

• Insulator: Phenolic Black / Anti - Tracking Melomine
• Connector: Brass with .0001" thick Nickel over it.
• Screw: Combination Head, over .0001" thick Zinc over Steel / Nickel Over Brass

• Current Rating: 10 AMPS.
• Voltage Rating: 500Volts
• Temperature Range: -30oC to 75 oC
• Dielectric Strength: 22500 Vrms between the conductors.
• Insulation Resistance: 20MW (Min) at 500 VDC

• Insulator: PBT
• Connector: Brass with .0001" thick Nickel over it.
• Screw: Combination Head, over .0001" thick Zinc over Steel / Nickel Over Brass

General Specification :-

• Current Rating: 16 / 32A , 63A, 100A
• Voltage Rating: 500Volts
• Temperature Range: -30oC to 75 oC
• Dielectric Strength: 22500 Vrms between the conductors.
• Insulation Resistance: 20MW (Min) at 500 VDC

• Insulator: Phenolic Black / Anti - Tracking Melomine
• Connector: Brass with .0001" thick Nickel over it.
• Screw: Combination Head, over .0001" thick Trivalent Zinc over Steel / Nickel Over Brass

• Suraj Limit Switches type LSR & LSRS have been specially designed to convert a mechanical motion into an electrical control signal. The mechanical motion is usually in the form of a cam, a machine component or an object moving towards a predetermined position. The cam engages the limit switch roller lever or plunger and in turn makes or breaks an electrical contact inside the switch.
• This electrical control signal is then used to limit, position or reverse motion travel or to initiate another operating sequence it can also be used for counting, sorting or as a safety device. Typical applications of the suraj limit switch are in the control circuit of solenoids control relays and motor starters (Wthh control the motion of the machine tools) presses, conve ors hoists, elevators and practically every type of motor Driven machines.

• Suraj Limit Switches are available in Two basic types. They are normally used where actuation is relatively fast or for snap action where action is relatively slow. The extended NO contact closes considerably after the NC contact opens.
• The basic limit switches are also available in standard die cast aluminium housing with or without oil tight enclosure and with Two types of actuators namely, normal roller lever and angular roller lever.

• Type LSR & LSRS is available having 1 NO and 1 NC Contact arrangement.

• Switches conform to AC II duty as per IS 6875 (part 1) - 1973 and Is 2147 / 1962 for degree of protection of enclosure.

• Make sure the electrical load is within the limit switch contact rating.
• Do not connect the double pole contacts to opposite polar rating.
• Adjust the lever arm parallel to the leading guage of the cam. 45 is recommended.
• Over travel of the limit switch should not be exceeded. 5to15is recommended.
• Do not allow the lever arm to snap back. A gradual controlling guage should be used on cams which travel beyond the roller.

• Current Rating: 30 AMPS.
• Voltage Rating: 500Volts
• Temperature Range: -30oC to 75 oC
• Dielectric Strength: 22500 Vrms between the conductors.
• Insulation Resistance: 20MW (Min) at 500 VDC

• Insulator: PBT (Poly Butylene Terephthalate)
• Connector: Brass with .0001" thick Nickel over it.
• Screw: Combination Head, over .0001" thick Trivalent Zinc over Steel / Nickel Over Brass

• Heavy duty ratchet type Crimping tool suitable for non-insulated terminals & Lugs from 1.5mm2 - 50 mm2 (refer to table below), press to release system with precise crimping jaws for points & hexagonal type crimping.

• Hand hydraulic crimping tool (concealed) for crimping non insulated terminals / Lugs both light and heavy duty.
• The Tool has 17 tons output & weighs 14 kgs, head 9.5kgs. Available range from 16 MM2 to 400 MM2 giving hexagonal crimping shape.
• The tool is provided with nine sets of hexagonal dies as per DIN / JIS standards - 16 - 25, 35, 50 - 70, 95, 120, 150, 185 - 240, 300 and 400 SQ MM ( 9 sets of hexagonal dies ) The entire tool is set in a easy transportable acrylic carrying case.
• The tool has automatic cutoff system for perfect crimping which avoids excessive over crimping of joints. Easy and instant pressure releasing system. Head sleek to accommodate entry of cable at remote working areas.

• Heavy Duty ratchet cable cutter suitable for cutting cable upto 300mm2 & smaller Hard drawn copper & aluminium cables.
• Quick release Lock on handles, special Hardened Steel Blades for longer life unique 5-tooth ratchet design ensures a non-slip cut. High leverage boot increases cutting Power on tough jobs.
• Quick release mechanism simplifies blade back out. Handles Lock together to simplify Pouch storage and comfort grips. NOT suitable for cutting solid bar or cable with steel cores, wire or ropes.

• Heavy duty Hydraulic Cable Cutter Suitable for cutting steel wire, aluminium wire, round bar & steel ropes.
• The blades are made of high carbon alloy. (HRC 65) specialized to cut steel wires & ropes.

• Self adjustable stripper cum cutter with adjustment of blade soft or hard sheaths.Tools has two functions as both a cutter and a stripper for electrical cables of 0.5mm2 to 6mm2 in diameter.
• Tool provided with adjustable stopper for consistency in wire strip lengths. The Stripper has the capacity to strip maximum 1" in length. The tool width is 3.2 inches and length is 6.5 inches.

• HST is halogen-free, flexible, flame retardant heat-shrinkable tubing. This tubing can meet RoHS compliant and Sony environment substance.
• HST can be used in any enclosedarea where a flame-retardant, halogen-free environment is required, such as Metro railway, skyscraper, mss transit vehicles and ships.
• The product is UL recognized at 600V.

• Heavy duty Cable tie guns suitable for bunching cables with cable tie upto 4.8mm width.
• The gun gives a professional & a neat look to the wiring done inside panels/machines, works with a quick squeeze mechnasim where one can fasten and cut cable ties in single operation, the tool has a sturdy metal body for longer life.
• Length=158 X 130mm
• Weight=310g

• We offer highly durable PTFE Multicore Twisted / Shielded & Sheathed Cables at reasonable prices.
• Single twin planetary-twisted pairs are available as per the customer's specific requirements.
• Insulated conductors of assorted sizes with cable can be formed into multicore cables (with or without over shielding), with tape wrapped Mylar, PTFE or conventional extruded PVC Jackets / Sheaths, complete harness as per the customer's requirements.

• Conductor : ABC/SPC/NPC
• Insulation : PTFE Wrap Insulation
• Properties : Resistant to Fire, Chemicals, Sunlight, Moisture & Corona Resistant.
• Type : Multi Core / Multi Colour
• Shield Type : SPC / ATC Braid
• Voltage Grade : 250 V / 600 V / 1000 V
• Jacket Material : PTFE or FRLS PVC

• The conductor of our RF Coaxial Cables is sliver plated copper weld steel wire and PTFE insulation.

• Poly Tetra Fluoro Ethylene (PTFE) is a synthetic polymer with excellent dielectric insulation properties.
• We offer premium quality PTFE Sleeves at industry leading prices. It is highly resistant to fire, chemicals, acids, sunlight and moisture.
• In its manufacture we use best quality raw materials while the colors and dimensions are defined by our clients. Our product is durable and applicable in corrosive fluid pipelines, insulation sheathing and coated shafts.

• We manufacture PTFE Sleeves and tubing as per the requirements of Indian Defense Standard JSS 54802.
• Made from PTFE tape wrapping and sintering process these sleeves are more flexible, high tear resistance and are mechanically more stable.

• Today the world is moving towards greater planned security and visibility. CCTV cameras play a big part in security plans, remote monitoring and visibility, and their presence is increasing rapidly.
• The sensitive nature of CCTV use means that the cables and wires used have to be of the highest quality and reliability. It has become a trusted brand in this industry, by providing industry leading solutions for CCTV cabling in all kinds of environments.

• These Fire Alarm System cable products are suitable for smoke alarms, voice communication, burglar alarms, microprocessor controlled systems, fire alarm systems, and more. Our prices are best in the industry. Chetan can manufacture them as per customer specifications.

• Mic cables are used for connecting flow level microphones or musical instruments. Key properties of microphone cable (Mike) are ruggedness, flexibility, flex life and interference immunity.
• The audio engineering society and the European broadcast union have established an international standard called AES/EBU. The key difference between twisted pair specification for digital audio cable and standard analog audio cable is the impedance specification. This potential amount of mismatch can result in signal reflection and jitter causing errors at the receiver.

• It offers wide range of Moulded Cables that are suitable for DVD players, computers, TV, gaming and many other electronic gadgets. These are tested at our well equipped labs to ensure quality and efficiency of the products.

• Right from High and Low Temperature versions to a variety of gauge sizes, dimensions, and insulation materials, shielding configurations, and jacketing materials, our multi core cables are available in an ever expanding range of choices.
• These cables meet the scientific and industrial demands of varied users and systems including computers, communications, instrumentation, sound, control, audio and data transmission. Each of these cables is designed to protect signal fidelity under decisive environments by reducing hum, noise, and crosstalk

• Shielded cable ensures signal integrity and provides confidence in audio and video transmissions, preventing downtime and maintaining sound and picture clarity. Among the shield types available are braid shield, foil shield, combination shields and lapp shields.
• Braid Shield provides superior structural integrity, while maintaining good flexibility and flex life. These shields are ideal for minimizing low frequency interference and have lower DC resistance than foil. Braid shields are effective at audio, as well as RF ranges.
• Foil Shield provides 100% cable coverage, necessary for electrostatic shield protection. Because of their small size, foil shields are commonly used to shield individual pairs of multi pair data cables to reduce crosstalk. Drain wires are used with foil shield to make termination easier and to ground electrostatic discharges.
• Combination Shields provides maximum shield efficiency across the frequency spectrum. The combination foil/braid shield combines the advantage of 100% foil coverage plus the strength and low DC resistance of the braid.