-
Average PUF Density
40 ± 2 Kg/ cu.mtr/ m³
-
PUF Blowing Agent
141B (CFC free)
-
Insulation Material
Polyurethane foam
-
Polyurethane foam
+90°C to -60°C
-
Penal Type
Discontinuous type with cam lock
-
M.O.C. Of Cam Locks
Cam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement
-
Type Of Panel Joints
Tongue & Groove Joint with Cam lock and all side rubber gaskets
-
Corner Panel Available
12” X 12” X 162”(Maximum Length)
-
Length of wall & ceiling panel
2032 mm to 12000 mm 80” to 472.5” inch
-
MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load dis
90 to 95%
-
Vapour Permeability
5.5mg/PASM.
-
5.5mg/PASM.
Less than 2%
-
Less than 2%
Less than 2%
-
Compressive Strength at 10% Deformation
0.21 N/ sq.mm (For PUF only)
THICKNESS : 60, 80, 100, 125 & 150 mmSURFACE MATERIAL Gl Pre-Painted Sheet, S.S. Sheet (Grade 304316 & Surface Finish 2B & Mate), GI Plain Sheet, Plain Galvanize Iron. (Inside & Outside different metal can be placed as per your requirement)FLOOR : (A) For Kota stone or concrete floor, PUF Slab with both side tar felt coated.(B) For Kota stone or concrete floor, both side metal surface panel in which each side fits with cam lock and prevent temperature loss.(C) Aluminium Chequered Plate with Marine Ply. (D) FRP Cladding on floor DOOR : (A)Flush Type : Swing Door with FRP Profile, Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life.Opening Size :24"x72", 30"x72", 34"x78", 46"x84" (Door Opening W x H) (B) Over Lap Type : Teak wood frame with metal covering by using heavy duty hardware for better strengthSize : 45"x84", 49"x84", 54"x84", 60"X90" (Door Opening W x H) (C) Sliding Type: Sliding Doors are delivered as complete units easy to mount with all fittings, sliding rail, and Bottom guide roller etc. Sliding Doors are designed for tough commercial environments such as Cold Stores, Incubation Chamber, Blast Chiller.Size : Widt h: 870120015001800 mm, Height: 2100 to 3000 mm, Thickness: 80 mm (D) Hatch Door: Different size hatch door with heavy frame for easy material movement in high turnover ice cream and dairy industries.Opening Size (WxH): 20"X20", 24"x24", 30"X30"
