We are providing fully automatic combo type incubation chambers with heating and cooling both process together in single chamber. Application: Curd Incubation Blast ChillingStorage Standard Incubation time is approx. 4 hours but it will depend upon the packing type and loading temperature of curd with a condition that the chamber temperature should be 45° C before loading. Standard cooling time is approx. 5 hours but it will depend upon the packing type and loading temperature of curd with a condition that timing will be considered after getting chamber temperature as 2° C.

Body : - Outer S.S Grade 304, Inner – S.S Grade 304, Size (L X W X H): Single : 27” x 14” x 34.5” Double : 27” x 23.25” x 34.5” Temperature : - +30°C to +50°C, Insulation : - 38 mm PUF Insulation Mounted : - Mounted with S.S Stand - Grade 304, Application : For uniform Demoulding of Candy from Mould , Making Uniform Layer of Choco on each Candy of Mould. Heater : 1.5 KwCapacity : 1 Mould and 2 Mould

We are one of the trusted manufacturers of Cold Rooms, Walk- in Coolers & Freezers that are specially designed for chilling or freezing applications. The CFC-free refrigeration systems facilitate efficient cooling, freezing of the chamber integrated with user-friendly structure and design. Available in various capacities, these Cold Room are provided with pre-fabricated panels for easy assembly, cam lock in tongue and groove assembly. These Cold Room find wide application in Food Processing, Dairy Products, Fisheries, Hotels-Restaurant, Research laboratories, Chemical and Pharmaceuticals, Ware House Storages, Agriculture, Horticulture-Floriculture etc

• Length of wall & ceiling panel2032 mm to 12000 mm 80” to 472.5” inch
• MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load dis90 to 95%
• Vapour Permeability5.5mg/PASM.
• Average PUF Density40 ± 2 Kg/ cu.mtr/ m³
• 5.5mg/PASM.Less than 2%
• PUF Blowing Agent141B (CFC free)
• Less than 2%Less than 2%
• Insulation MaterialPolyurethane foam
• Compressive Strength at 10% Deformation0.21 N/ sq.mm (For PUF only)
• Polyurethane foam+90°C to -60°C
• Penal TypeDiscontinuous type with cam lock
• M.O.C. Of Cam LocksCam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement
• Type Of Panel JointsTongue & Groove Joint with Cam lock and all side rubber gaskets
• Corner Panel Available12” X 12” X 162”(Maximum Length)

We are providing fully automatic combo type incubation chambers with heating and cooling both process together in single chamber. Application: Curd Incubation Blast ChillingStorage Standard Incubation time is approx. 4 hours but it will depend upon the packing type and loading temperature of curd with a condition that the chamber temperature should be 45° C before loading. Standard cooling time is approx. 5 hours but it will depend upon the packing type and loading temperature of curd with a condition that timing will be considered after getting chamber temperature as 2° C.

Body : - Outer S.S Grade 304, Inner – S.S Grade 304, Size (L X W X H): Single : 27” x 14” x 34.5” Double : 27” x 23.25” x 34.5” Temperature : - +30°C to +50°C, Insulation : - 38 mm PUF Insulation Mounted : - Mounted with S.S Stand - Grade 304, Application : For uniform Demoulding of Candy from Mould , Making Uniform Layer of Choco on each Candy of Mould. Heater : 1.5 KwCapacity : 1 Mould and 2 Mould

We are one of the trusted manufacturers of Cold Rooms, Walk- in Coolers & Freezers that are specially designed for chilling or freezing applications. The CFC-free refrigeration systems facilitate efficient cooling, freezing of the chamber integrated with user-friendly structure and design. Available in various capacities, these Cold Room are provided with pre-fabricated panels for easy assembly, cam lock in tongue and groove assembly. These Cold Room find wide application in Food Processing, Dairy Products, Fisheries, Hotels-Restaurant, Research laboratories, Chemical and Pharmaceuticals, Ware House Storages, Agriculture, Horticulture-Floriculture etc

• Type Of Panel JointsTongue & Groove Joint with Cam lock and all side rubber gaskets
• Corner Panel Available12” X 12” X 162”(Maximum Length)
• Length of wall & ceiling panel2032 mm to 12000 mm 80” to 472.5” inch
• MS bolt with thermal breaking cap. 4 mm thickness X 80 X 80 mm Aluminum/MS washer plate for load dis90 to 95%
• Vapour Permeability5.5mg/PASM.
• Average PUF Density40 ± 2 Kg/ cu.mtr/ m³
• 5.5mg/PASM.Less than 2%
• PUF Blowing Agent141B (CFC free)
• Less than 2%Less than 2%
• Insulation MaterialPolyurethane foam
• Compressive Strength at 10% Deformation0.21 N/ sq.mm (For PUF only)
• Polyurethane foam+90°C to -60°C
• Penal TypeDiscontinuous type with cam lock
• M.O.C. Of Cam LocksCam locks body material HIPS and male latch is made of nylon Glass field with GI sheet reinforcement