Our Products

Agriculture Tools 18 Products available
Cultivators 4 Products available
Tiller 3 Products available
Earth Moving Vehicle
2 Products available
- Tipping Trailer
- Non Tipping Trailer
Earthmoving Equipment & Machines
1 Products available
- Post Hole Digger
Plough Equipment
1 Products available
- Mould Board Plough
Drilling Bits, Chucks & Collets
1 Products available
- V Pass Seed Drill
Plastic Machine
1 Products available
- Mulching Machine
Others Products 6 Products available

Agriculture Tools #4992613

Leading Manufacturer, Supplier & Retailer of Hitech Hydraulic Reversible Plough, Manual Reversible MB Plough, Compact Disc Harrow, hydraulic reversible mb plough and Two Way Land Leveler.

Hitech Hydraulic Reversible Plough

It has a pair of three sets of mold board ploughs which can be changed or reversed to work in both directions. And its reversible action makes the ploughing operation faster & more economical.
Reversing of the Furrow easily done by hydraulic actuation mechanism.
Since Two Furrows are used it reduces ploughing time.
It perform the function of deep opening and loosing of soil.
It lifts the soil-clod and throws it on the soil surface breaking the soil-clod into smaller particle size.
The plough is capable for infinite angle adjustment for left hand and right hand work.
The plough is protected against damage by an additional shear bolt device. Same plough can be used for various width of cut

Description	2 Bottom	3 Bottom (2+1)
Size of Board in inch	12,14,16
Complete width of Cut in (inch)	20,24,28	30,36,42
Depth of Cut (inch)	9-16
Size of frame mm	HD Sq. pipe 95 X 95 mm
Material of Shear Bar & land slide	Boron Steel
Material of Shear plate	Boron Steel
Actuation of change of Board	Hydraulic
Safety	Shear Bolt
Weight (Approx.) in Kgs	435	610
Suitable HP Range	50 - 60	70-90

View Complete Details

Ask Latest Price & Details

Manual Reversible MB Plough

Reversible MB Plough is a specially designed agricultural implement used for turning the soil levels up side down, incorporating soil residues and making available more fertile layer for the new crop. It provides deep seed bed preparation with proper aeration and drainage. MB Plough is used as a primary tillage implement for soft and hard soils.
It has a pair of two sets of Mould board ploughs which can be changed or reversed to work in both direction
Reversing of the Furrow easily done by tilting of a handle bar.
It is easily used for deep-opening and loosening of the soil.
It lifts the soil-cold and throws it on the soil surface breaking the soil-cold into smaller particle size

Description	2 Bottom
Size of Board in inch	10	12	14	16
Depth of Cut in inch	8 to 12
Leg thickness mm	40
Bearing	32211/C / NA 4917
Main shaft ( Ø in mm)	90
Size of Main Frame	Channel 75 X 40 mm
Material of Shear Bar & land slide	EN 45
Bottom thickness (mm)	10
Material of Shear Point	EN 8
Actuation of change of Board	Manual
Weight (Approx.) in Kgs	260	315	350	380
Suitable HP Range	35 to 45		45 to 55

View Complete Details

Ask Latest Price & Details

Compact Disc Harrow

It can be used in both forms i.e. mounted as well as trailed.
High quality boron steel disc with 4852 HRC hardness.
Tillage depth of the harrow is 150200 mm.
Easily transportable as it gets easily attached and mounted.
Adjustable gang axles angle upto 46.
High quality bearings and hubs ensure smooth operation and put minimum load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs.

Description	16 Disc	18 Disc	20 Disc	22 Disc
Type of mounting	Three point Hitch Linkage (CAT II)
Disc Dia (mm)(Optional)	560 , 610 , 660 mm Square Pipe
Disc Type	Front: Notched, Rear: Plain
Frame	100 X 100
Disc Spacing (mm)	230
Maximum Depth (mm)	150-200 (Depends on soil moisture and field conditions)
Gang AXEL (mm)	32 mm Square Bar
Width of Cut (mm) ( Adjustable)	1900	2100	2220	2450
Bearings Hub	6	8	8	8
Suitable HP Range	50-60		60-70	80-90

View Complete Details

Ask Latest Price & Details

Hydraulic Reversible Mb Plough

Reversible MB plough uses for break & inverse the hard soil where other implements can not penetrate
It has a pair of 2 sets of MB ploughs which can be changed or reversed to work in both directions.
Reversing of the furrow easily done by hydraulic actuation mechanism.
Since two furrows are used it reduces ploughing time.
It performs the function of deep opening and loosing of soil.
It lifts the soil-clod and throws it on the soil surface breaking the soil-clod into smaller particle size.
Easy connectivity to tractor hydraulic control valve & easy to mount on tractor three-point hitch system

Description	2 Bottom	3 Bottom
Size of Board in inch	10,12,14,16
Complete width of Cut in inch	24	36
Depth of Cut in inch	12
Size of frame	Channel 75 X 40 mm
Material of Shear Bar & land slide	EN 45
Over All Length x Width x Height in mm	1750 x 940 x 1230	2030x1220x1270
Material of Shear Point	EN 8
Actuation of change of Board	Hydraulic
Weight (Approx.) in Kgs	285	360
Suitable HP Range	45 to 55	55 to 70

View Complete Details

Ask Latest Price & Details

Two Way Land Leveler

Soil retaining wings can be optionally fitted on both ends of the blade for carrying the soil without spillage
Reversible Land Leveler is ideal for levelling, filling, back fillings, farm yard clearing etc.
Improved crop establishment by uniform spreading of water and fertilizer improves uniformity of crop maturity.
Provision for usage in front as well as reverse direction ensures satisfactory front and back filling and leveling of the land.
Sharp edged hardened blades cuts clods, thrashes and uneven lands easily performing above expectations.

Description	6 Feet	6.5 Feet	7 Feet	8 Feet
Working Width, mm	1800	1990	2100	2400
Cutting Blade Thickness mm	10
Main Frame(mm)	125 X 65
Blade Dim (mm)	75 X 10
Over All: Length x Width x Height (mm)	1300 X 1830 X 1050	1300 X 1980 X 1050	1300 X 2135 X 1050	1300 X 2440 X 1050
Mounting	3 point linkage (Cat II)
Weight Kgs	190	205
Levelling direction	Two Way
Linkage Pin	28 mm
Suitable HP Range	35 - 45		50 -60	60-70

View Complete Details

Ask Latest Price & Details

Disc Ridger

Fully or easily adjustable for row spacing size and depth.
Available in 2 bottoms and 4 bottoms to make one and 2 ridges resp.
It is easily operated in each and every type of soil.
Its high quality boron steel given extra life to equipment.
High quality bearings and hubs ensure smooth operation and put minimum load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs

DESCRIPTION	2 Disc	4 Disc
Mounting CAT	Cat II
Main Frame	100 X 100 (Square pipe Frame)
Size of Disc	660 mm x 5/6 mm thick
Type Of Disc (Material)	Plain (High Carbon/Boron Still )
Working Width Range (mm Approx.)	1420 (Depends On working with Adjustment and soil moisture)	2400 (Depends On working with Adjustment and soil moisture)
Spacing Between Disc	Adjustable
Over All: Length x Width x Height (mm)	910 x 2000 X 1385	1700 X 2550 X 1485
Working Depth Range (mm Approx.)	150-300 (Depends On soil moisture and field condition)
Weight (Approx. in Kgs)	190	400
Suitable HP Range	35-50	50 Above

View Complete Details

Ask Latest Price & Details

Rear Tyre Disc Harrow

Optional wheels can be provided for towing on road form inner side oil seal and outer side threaded Outer cap to prevent dust. Trailed Offset Disc Harrow trails behind the tractor and because of heavy design and weight can effectively break up heavy clods.
The Harrow has a strong and sturdy main frame with high quality steel discs and heavy duty chilled cast-iron spools to provide rear weight.
Easy to transport on the tyres .
High quality boron steel disc with 4852 HRC hardness.
High quality bearings and hubs ensure smooth operation and put minimal load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs.

Description	12 Disc	14 Disc	16 Disc	18 Disc	20 Disc
Type of mounting	Three point Hitch Linkage (CAT II)
Disc Dia (mm)	560/610
Disc Type	Front: Notched, Rear: Plain
Frame	100 X 100 mm Box Angle
Disc Spacing (mm)	225
Maximum Depth (mm)	100-150 (Depends on soil moisture and field conditions)
Width of Cut & Shaft (mm)	( Adjustable), 32 X 32
Bearings Hub	4	4	6	8	8
Total Weight (Approx.) Kgs	736	823	910	1005	1110
Tyre Size	6.00-16
Suitable HP Range	50 & 65			70-90 Above

View Complete Details

Ask Latest Price & Details

Reversible Plough

Single Bottom Reversible Plough has been designed and developed in Heavy Duty models to perform primary tillage operations satisfactory at any soil conditions providing deep opening and loosening of the soil.
It can be attached easily to a tractor through three point linkage and operated with the help of tractor hydraulic system. Due to heavy duty main shaft, wear hardening technology in clutch box & special manganese steel share points increases the life of the plough. The plough can cut thrash and buries it completely as well as it can cut heavy soil clods into small particles and give complete inversion of the soil.

Description	35 HP	50 HP
Main Frame	Round Bar
Furrow Thickness (mm)	6
Depth Of Furrow (Inch)	6” to 12”
Working Width (mm)	325	400
Overall dimension (mm) (L x W x H)	1310 X 860 X 1160
Mounting	CAT II
Leg Thickness	50 mm
Material of Shear Point	EN 45
Weight (Kg)	245	290

View Complete Details

Ask Latest Price & Details

Disc Plough

In conformity with the soil conditions it is being produced with 2, 3, 4 & 5 bottom versions.
It is directly mounted to the tractors
Extra Heavy-duty pipe frame has high trash clearance allowing the plough to operate under heavy crop residue.
It is used to open the new fields and to process the stony areas.
It can be used easily at rocky and rooted areas.
It is especially useful in hard and dry trashy land conditions and in soils where scouring is a major problem.
High quality bearings and hubs ensure smooth operation and put minimum load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs.

DESCRIPTION	2 Disc	3 Disc	4 Disc	5 Disc
Mounting CAT	Cat II
Main Frame	OD 168mm Tubular
Disc Size (Material)	660 mm x 5/6 mm thk (High Carbon or Boron Steel)
Type Of Disc	Plain Disc
Colter Wheel (Dia)	20"
Axel Type (Dia) /Material	30 mm /EN 8
Working Width Range (mm Approx.)	600-750	751-840	841-980	981-1120
Working Depth Range (mm Approx.)	150-250 (Depends On soil moisture and field condition)
Spacing Between Disc (mm)	560
Overall dimension (mm) (L x W x H)	1865x950x1250	2400 X 1040 X 1250	3015x1340x1250	3630x1640x1250
Weight (Approx. in Kgs)	285	385	515	600
Suitable HP Range	35 to 50	50 to 70	70 to 80	90-100

View Complete Details

Ask Latest Price & Details

Angle Frame Disc Harrow

Offset Disc Harrowis tractor hydraulic, operated implement which trails behind the tractor and effectively breaks up clods with deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried. Provision of handle screw enables it for the adjustment of inclination required for the disc penetration depth hence suitable for different cutting depths for varying soil conditions.
In addition the implement being easily attached and transportable in top speeds, little time is lost between the shed and the field.
Due to high quality built up and strong design and maintenance is low.
High Quality Boron steel discs Tillage depth of the harrow is 4-6 inch
High quality bearings and hubs ensure smooth operation and put minimal load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs

Description	12 Disc	14 Disc	16 DISC	18 Disc	20 Disc	22 Disc	24 Disc
Type of mounting	Three point Hitch Linkage (CAT II)
Disc Dia (mm) (Optional)	560 ,610
Disc Type	Front: Notched, Rear: Plain
Frame (mm)	75 X 75 ( Angle Frame) /100 X 50 Front Channel
Disc Spacing (mm)	225
Gang AXEL (mm)	32 mm
Width of Cut (mm) ( Adjustable)	1220	1450	1680	1930	2220	2450	2650
Bearings Hub	4	4	6	8
Weight (Kg)	400	425	460	500	550	590	650
Suitable HP Range	35-50	40-55	50-60		60-70	80-90	90 -110

View Complete Details

Ask Latest Price & Details

Poly Disc Harrow

Poly disc harrow to tractor with three-point linkage system. The poly disc harrow is designed specifically for paddy field & root instead , sticky , stony and hard soil.
The machine can also fit for dry-land. Poly disc harrow is used for chopping of stems and mixing with soil after harvesting. After using of harrow on the field, you can use this disc harrow for breaking of clods and crumbling of soils. Our poly disc harrow is also used on all kinds of soils for making of seed bed, seeding bed, chopping of weeds, mixing of organic and inorganic fertilizers with soil and aeration as easily.
It is ideal for rain feed areas for checking soil erosion by water and wind.
High quality bearings and hubs ensure smooth operation and put minimal load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhub

DESCRIPTION	5 Poly Disc	6 Poly Disc	7 Poly Disc
Mounting CAT	Cat II
Main Frame	Sq. Pipe 100 X 100
Size of Disc mm (Optional)	610, 660
Type Of Disc	Plain Disc , Boron Steel
Axel Type (mm)	60 mm
Working Depth Range (mm Approx)	152 – 304 mm (Depends on soil moisture and field conditions)
Spacing Between Disc (mm)	225 or 250
Over All: Length x Width x Height (mm)	2016 X 1270 X 1150	2286 X 1270 X 1150	2555 X 1270 X 1150
Weight (Approx. in Kgs)	400	470	510
Suitable HP Range	35-50	55-70	70 -80
Ball Bearing	32209
Bearing Housing	2 Nos. (SG iron)

View Complete Details

Ask Latest Price & Details

Tandem Disc Harrow

Tandem disc harrow is designed in cross disc angle. It is easy to use in tight corners because of its X type design.Suitable for hard and medium soil conditions.
Its heavy duty frame & heavy weight helps to break the clods. High quality bearings and hubs ensure smooth operation and put minimal load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs
High quality steel discs.
Tillage depth of the harrow is 6 inch. Maintenance is easy but need to be scheduled.
Easily transportable as it gets easily attached and mounted

Description	16 Disc	18 Disc	20 Disc	22 Disc	24 Disc
Type of mounting	Three point Hitch Linkage (CAT II)
Disc Dia (mm) (Optional)	560 ,610 ,660
Disc Type	Front: Notched, Rear: Plain
Frame	100 X 100, with 100 x 50 mm Main Channel
Disc Spacing (mm)	225
Maximum Depth (mm)	100-150 (Depends on soil moisture and field conditions)
Width of Cut (mm) ( Adjustable)	1625	1825	2220	2250	2380
Bearings Hub	6	8
Scrapper Flat (mm)	6 Adjustable
Total Weight (Approx.) Kgs	530	560	595	630	740

View Complete Details

Ask Latest Price & Details

Hydraulic Reversible Disc Plough

This Hydraulic Reversible disc ploughis the most suitable and versatile to work on slopes because it is not necessary to open or close plowing frames, providing high ploughing quality and performance, which can also be used for the construction of contour lines.
It has multiple disc adjustments, such as height, swivel and inclination, ensuring the best adjustment for each soil type Leveling adjustments are simple to perform giving you an even cut at the appropriate depth, thus increasing your productivity in the field.
Leveling adjustments are simple to perform giving you an even cut at the appropriate depth, thus increasing your productivity in the field.
Another feature is the reinforced chassis and the reduced amount of moving parts resulting in lowered maintenance costs.

DESCRIPTION	2 Disc	3 Disc
Mounting CAT	Cat II
Main Frame	Sq. Frame 100 X 100
Size of Disc	660 x 5/6 mm thk
Type Of Disc	Boron Steel
Colter Wheel (Dia)	20"
Overall dimension (mm) (L x W x H)	1260 X 950 X 1862	1260 X 1270 X 2300
Axel Type (Dia) /Material	30mm/EN 8
Working Width Range (mm Approx.)	600-750	751-840
Working Depth Range (mm Approx)	150-250 (Depends On soil moisture and field condition)
Spacing Between Disc (mm)	560
Suitable HP Range	35-50	55-70

View Complete Details

Ask Latest Price & Details

Center Tyre Disc Harrow

Designed to work easily in tough operating conditions. Can be used for both, surface disc harrowing (superficial ploughing) and intensive deep ploughing.
Easy to transport on the tyres using the hydraulic system.
The long lasting and reliable tyres and hydraulic mechanism enable the operator to control the cut depth and facilitate in easy transportation.
Due to center tyre moving from one place to another place is balance and easy.
High quality bearings and hubs ensure smooth operation and put minimal load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs.

Description	18 Disc	20 Disc	22 Disc	24 Disc	28 Disc
Type of mounting	Three point Hitch Linkage (CAT II)
Disc Dia (mm) (Optional)	660/610 / 560
Disc Type	Front: Notched, Rear: Plain
Frame	100 X 100 mm		125 X 125 mm
Disc Spacing (mm)	228.6(9”)
Maximum Depth (mm)	150-200 (Depends on soil moisture and field conditions)
Width of Cut & Shaft (mm)	( Adjustable), 50 X 50
Bearings Hub	4	8
Tyre Size	8.25 X 16 Tyre
Suitable HP Range	70-90		90-140	140-165

View Complete Details

Ask Latest Price & Details

Channel Frame Disc Harrow

Offset Disc Harrowis tractor hydraulic operated implement which trails behind the tractor and effectively breaks up clods with deeper penetration due to its heavy weight and design. Both disc gangs are offset at an angle to ensure no soil remains uncut and heavy crop residue with organic matter is effectively buried.
In addition the implement being easily attached and transportable in top speeds, little time is lost between the shed and the field.
Due to high quality built up and strong design and maintenance is low.
High Quality Boron steel discs
Tillage depth of the harrow is 6 inch and can be adjusted with help of angle adjustment.
High quality bearings and hubs ensure smooth operation and put minimal load on the tractor.
High quality seals prevent theentry of mud and water into thebearingsandhubs

Description	12 Disc	14 Disc	16 Disc	18 Disc	20 Disc	22 Disc	24 Disc	28 Disc
Type of mounting	Three point Hitch Linkage (CAT II)
Disc Dia (mm) (Optional)	560 ,610 ,660
Disc Type	Front: Notched, Rear: Plain
Frame (mm)	75 X 40( Channel Frame)
Disc Spacing (mm)	225
Maximum Depth (mm)	100-150 (Depends on soil moisture and field conditions)
Gang AXEL (mm)	32 mm
Width of Cut (mm) (Adjustable)	1220	1450	1680	1930	2220	2450	2650	2780
Weight (Kg)	400	445	492	520	555	590	700	790
Bearings Hub	4	4	6	8	8	8	8	8
Suitable HP Range	45-55		55 -60		60-70	80-90	90 -110	90 -110

View Complete Details

Ask Latest Price & Details

Bali Plough

Bahubali Three Furrow Bali Plough is useful for cultivating the soil, as well as it use for small (2 width) Bund operations.
BahubaliThree furrow bali plough makes farming work easier and faster.
It is ideal for digging fields and farming purpose in different agriculture industries.
Adjustable wingspan suitable for varying sizes of Bunds.
Provision of adjustment spacing between furrows suitable for various types of crops.
Hardened shear points to uproot residues and break clods easily.

DESCRIPTION	3 Furrow	4 Furrow
Mounting CAT (Flat Size mm)	Cat II (75 X 12 mm)
Main Frame	100 x 50 mm Channel Frame
Size of Tyne (Material)	Channel Box 25 mm Thickness
Furrow	6 & 10 mm thick
Shovel (Material)	8 mm (EN-8)
Depth (inch).	6 to 8
Width Of Cut (mm Approx.)	1220	1830
Spacing Between Tyne	Adjustable
Weight (Approx. in Kgs)	181	225
Suitable HP Range	35-50

View Complete Details

Ask Latest Price & Details

Land Leveler

Land Leveleris ideal for leveling, filling, back filling and farmyard cleaning etc. Sharp edged hardened blades cuts weeds, clods, thrashes and uneven lands easily performing above expectations
Soil retaining wings can be optionally fitted on both ends of the blade for carrying the soil without spillage.
It is suitable for sticky soils as well.
Heavy Duty Land Leveler is ideal for leveling, filling farm yard clearing etc.
It is easily mountable with three point linkage and controlled by hydroalic system of tractor.

Description	5 Feet	6 Feet	7 Feet	8 Feet
Working Width, mm	1525	1800	2100	2400
Cutting Blade Thickness mm	10
Support Flat (mm)	75 X 12
Blade Dim (mm)/Material	75 X 12/ EN8
Over All: Length x Width x Height (mm)	1250 X 1525 X 1050	1875 x 1225 x 1000	2175 x 1225 x 1000	1250 X 2450 X 1050
Mounting	3 point linkage (Cat II)
Weight Kgs	140	187	198	220
Levelling direction	Regular
Linkage Pin	28 mm
Suitable HP Range	35-45	45-50	50 - 60	60 - 70

View Complete Details

Ask Latest Price & Details

Bottom Mould Plough are tractor drawn conventional implement being widely used for primary tillage operations.Mould Board Plough can work & useful in very hard soil conditions and in soils where securing is a problem.Made for high quality material and helps in better inversion of soil. The plough has special wear-resistant steel blade with bar points for toughest ploughing jobs.Low maintenance cost.Increase tractor stability.Bar point bottom ensures longer life as it can be extended or reversed and reused till the last possible length.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Mitesh (Bhansali trailors pvt ltd)
Dhantara” Gurudwara Rd, Kopargaon, 423601 Dist: Ahmed Nagar, Maharashtra (India), Ahmednagar
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.

Our Products

Agriculture Tools 18 Products available
Cultivators 4 Products available
Tiller 3 Products available
Earth Moving Vehicle
2 Products available
- Tipping Trailer
- Non Tipping Trailer
Plough Equipment
1 Products available
- Mould Board Plough
Drilling Bits, Chucks & Collets
1 Products available
- V Pass Seed Drill
Plastic Machine
1 Products available
- Mulching Machine
Earthmoving Equipment & Machines
1 Products available
- Post Hole Digger
Others Products 6 Products available